Used Materials Testing in Taiwan

GR-C010 3 point bend/flexure

• Manufacturer: cometech testing machines

Capacity: 10kN | Jaw face width: 40mm | Span: 22~260mm | Mini. load cell: 200N | Temperature limits: 0~200℃ | Up weight: 801g | Down weight: 5342g

GR-B02A Wheel peel grips

• Manufacturer: cometech testing machines

Capacity: 200N | Wheel width: 12.7mm | Specimen thickness: 0.1~2mm | Temperature limits: -10~100℃ | Weight: 440g | Standard: ASTM D3330

GR-A030 Eccentric Grips

• Manufacturer: cometech testing machines

Capacity: 2kN | Jaw face width: 52mm | Specimen thickness: 0.2~4mm | Mini. load cell: 200N | Temperature limits: -10~200℃ | Weight: 1143g

GR-A020 Spring Loaded Fold Grips

• Manufacturer: cometech testing machines

Capacity: 2kN | Jaw face width: 44mm | Specimen thickness: 0.2~3mm | Mini. load cell: 200N | Temperature limits: -10~200℃ | Weight: 687g

GR-B040 90° peel grips

• Manufacturer: cometech testing machines

Capacity: 200N | Jaw face width: 32mm | Specimen thickness: 0.01~2mm | Temperature limits: -10~100℃ | Weight: 1992g | Standard: ASTM D3330

GR-E010 Yarn Grip

• Manufacturer: cometech testing machines

Capacity: 200N | Core diameter size: Ø0.1〜Ø1mm | Mini. load cell: 20N | Temperature limits: -10~200℃ | Weight: 432g | Standard: ASTM D2256

GR-C040 3 point bend/flexure

• Manufacturer: cometech testing machines

Capacity: 10kN | Jaw face width: 200mm | Specimen thickness: 25~280mm | Mini. load cell: 1kN | Temperature limits: 0~200℃ | Up weight: 2774g | Down weight: 16622g

Manual Drop Dart Impact Tester Confirm to ASTM D1709 GB-9639 Standard

• Manufacturer: cometech testing machines

This tester conforms to test standard applicable for method A and method B. Clamp the plastic film on a round specimen holder (dia. 127mm). The impact head used in method A is dia. 38.1mm and in method B is dia. ...

Full-Auto Rockwell Hardness Tester Confirm to GB/T230.2, JJS Z2245, EN-ISO6508, ASTME-18 Standard

Applications: Hard alloy / Surface hardened steel / Copper alloy / Carburized steel / Hard cast steel / Malleable casting / Annealed steel / Hardened steel /Aluminum alloy / Soft steel / Bearing steel Features: ●...

Adhesion/Release Tester Confirm to FINAT 4 Standard

• Manufacturer: cometech testing machines

QC-527 test range can do low and high speed peel test and also for 90 ° 、180° multi-angle peel test. Low speed peeling force generally uses 300mm/min to proceed with test, testlow-stick adhesive label tear force....

Hardness Specimen Cutting Device

• Manufacturer: cometech testing machines

QC-603I is suitable for hardness flat shape of polymer material, as a fixed sample or specimen trimming purposes. It needs to base on forming of appearance to make mold and take slightly larger than finished prod...

Electronic Drop Dart Impact Tester Confirm to ASTM D1709 GB-9639 Standard

• Manufacturer: cometech testing machines

This tester is according to test standard of method A and method B. The test plastic film is clipped on dia. 127mm of round clamp by very quick pneumatic way. The impact head method A is dia. 38.1mm and method B ...

Vicat Heat Deflection Tester Confirm to ASTM D648 ISO 75-1 Standard

• Manufacturer: cometech testing machines

The specimen is given a fixed 10N force (or 50N) at the center with a standard Ø1 mm pin, and the temperature should increase by 50 (or 120) degrees Celsius per hour. When the penetration depth of specimen reache...

Manual Molding Machine

• Manufacturer: cometech testing machines

QC-601B has parallel pressure plates and according to area of the material and force demand to choose machine type. Commonly used in powder compact, parts assembly, lamination work. Put the ingredients in the mid...

Circular Sample Cutter Confirm to ISO3801, ASTM D3776, GB/T4669, BS2471 Standard

• Manufacturer: cometech testing machines

QC-PS can cut specimens of area 100cm², weighing specimen unit weight, the balance of the required minimum reading value should reach 0.01 g. The cutter can cut specimens that thickness are 5 mm. Cutting material...