Used Leather

DCR SB - STITCH BEATING MACHINE

The DCR SB is an upright hammering machine with elongated anvil and support plate. Used to beat down and iron the stitches on specified leather goods, uppers, boots, bags, straps, suitcases, seats, back and colla...

ATOM-KS400 SPLITTER

• Manufacturer: Atom

Rebuilt 400mm splitter with top and bottom driving rollers for splitting automotive head rest covers – with variable speed control and special (split – stop – reverse) facility for half splitting straps, panels, ...

DCR-BHS - BOOT HEAT SEALING MACHINE

One of the key machines in the Goodyear shoe manufacture process. The heating element quickly heats the guide iron up as soon as the machine is turned on. Then the rubber sole and the welted upper are presented t...

DCR-SSL STAPLE SIDE LASTING MACHINE

One of the key machines in the Goodyear shoe manufacture process. The staple side laster creates staple from a wire reel, and then bends and hammers them into the shoe. The staples are forced through the insole r...

DCR-IT - INSEAM TRIMMER

One of the key machines in the Goodyear shoe manufacture process. Used for trimming the excess material from the lasted upper and insole rib after the welt sewing process. Our versatile motors give you full contr...

DCR-OS - OUTSOLE STITCHER

• Manufacturer: DCR

One of the key machines in the Goodyear shoe manufacture process. The outsole stitcher stitches the sole onto welted shoes using a lockstitch. The shoe is offered up to the machine with the sole facing up ready f...

DCR-EA420 SPLITTER

• Manufacturer: DCR Machines

Rebuilt 420mm splitter with top and bottom driving rollers for splitting automotive head rest covers – with variable speed control and special (split – stop – reverse) facility for half splitting straps, panels, ...

DCR-GIS - GOODYEAR INSEAM STITCHER (BALLET SHOES)

• Manufacturer: DCR

GIS specialised for ballet pointe shoes. The GIS stitches the upper through the channeled lip of the insole. The shoe is offered up to the machine with the sole facing up. The operator can then use the treadle at...

DCR US - Upper Scouring Machine

This is an upper scouring machine, for scouring the bottoms of uppers prior to cementing with motor reverse facility for scouring wheel debris removal. We use a soft brass abrasive scouring wheel which is suitabl...

DCR EMB 1210 120 X 100 PNEUMATIC EMBOSSER

Pneumatic embossing machine powered via foot/hand pedal Moving table 160x160 Embossing area 120x100 Can be used for gold foiling or blind embossing Small compressor needed We also make the embossing tools via PDF

DCR EMB 180- EMBOSSING MACHINE

Hand operated embossing machine, with foil device. Working area 180x100mm with front sliding table 400x320mm. With a fast die changing system and single phase.

DCR CSK- COMPUTER SKIVER

DCR CSK computer skiving machine. New generation computer controlled skiving machine. Each part can be programmed for 5 different types of skives for each foot type, with up to 50 sequences. Hundreds of programs ...

DCR-SC400 STRIP CUTTING MACHINE

This 400mm machine has an open left side so you can feed sheets wider than 400mm We have various size strip cutting machines from 210mm up to 1200mm Used to cut leather, rubber, plastic etc Easy change spacers wi...

DCR RCM100- Roller Glue Cementing Machine

This machine is for gluing leathergoods, synthetic leather, cardboard, vinyl etc. Water based glues can be used along with latex or solvent glues. Available with gluing working widths from 100-1000mm. Variable sp...

Elettrotecnica BC269 STEAMER

Elettrotecnica BC269 Steamer for steaming shoe uppers prior to lasting