New Edge Polishers

5" Hand Grinder and Polisher Package
- Manufacturer: DiamaPro
Includes HGP-5 5" Hand Grinder and Polisher, Dust Shroud & U Handle. The DiamaPro Systems HGP-5 five-inch hand polisher delivers best in class durability and performance. It has a 12.0 Amp AC/DC, 10,000 rpm motor...
Erie, PA
HGX-7 7" Hand Grinder
- Manufacturer: DiamaPro
*shroud & loop handle purchased separately The DiamaPro Systems HGX-7 seven-inch hand grinder delivers best in class durability and performance. It has a 15.0 Amp AC/DC, 4,400 rpm motor which provides high speed ...
Erie, PA
7" Hand Grinder Package
- Manufacturer: DiamaPro
Includes 7" Hand Grinder, Shroud, and Loop Handle The DiamaPro Systems HGX-7 seven-inch hand grinder delivers best in class durability and performance. It has a 15.0 Amp AC/DC, 4,400 rpm motor which provides high...
Erie, PA
Trusted Seller
FP Sphere 3mm
- Manufacturer: Giant Finishing
50 lb. bag of Porcelain media is great for polishing (in conjunction with one of our burnishing compounds) with some deburr/ edge break capabilities. Normally used in the final step of a finishing process.
$300 USD
Addison, TX
Trusted Seller
FP PIN 3mm X 10mm
- Manufacturer: Giant Finishing
50 lb. bag of Porcelain media is great for polishing (in conjunction with one of our burnishing compounds) with some deburr/ edge break capabilities. Normally used in the final step of a finishing process.
$250 USD
Addison, TX
Trusted Seller
FP PIN 1.7 X 5.2mm
- Manufacturer: Giant Finishing
50 lb. bag of Porcelain media is great for polishing (in conjunction with one of our burnishing compounds) with some deburr/ edge break capabilities. Normally used in the final step of a finishing process.
$450 USD
Addison, TX
Trusted Seller
FP Sphere 8mm
- Manufacturer: TBT
50 lb. bag of Porcelain media is great for polishing (in conjunction with one of our burnishing compounds) with some deburr/ edge break capabilities. Normally used in the final step of a finishing process.
$250 USD
Addison, TX
Trusted Seller
BRUSHING MACHINE VOL180 FOOTWEAR EDGE POLISHING BRUSH WITH ELECTRONIC SPEED VARIATOR AND BUILT-IN SUCTION
Width: 770mm; | Depth: 500mm; | Height: 1300mm; | Weight: 72Kg; | Speed: 400-2400rmps; | Engine: 0.75Hp; | Aspirator: 0.3Hp; | Air flow rate: 360m/h; | Power: 1Hp; | Noise: 70dB(A).
Monte Urano, Italy
CMG Macchine Kombitaurus
- Manufacturer: CMG Macchine
The Kombitaurus is fully automated and performing edge polishing machine that allows you to work the flat edge and the profiling edge in a production line and at the same time. It uses a rotation beam to create a...
Villafranca di Verona, Italy
CMG Macchine Dynamic Flotter
- Manufacturer: CMG Macchine
The new automatic edge-polisher Dynamic Flotter is designed to get high production and excellent polishing quality. A robust machine that allows different types of automatic simultaneous processing such as calibr...
Villafranca di Verona, Italy
CMG Macchine Flotter 520 / 540 / 540 PLUS
- Manufacturer: CMG Macchine
The edge-polisher Flotter 520 is suitable for polishing and profiling the edges on composite stones. A small machine that is simple to use and maintain. The electronic equipment sets the partial polishing, the on...
Villafranca di Verona, Italy
CMG Macchine V-Groove
- Manufacturer: CMG Macchine
The V-Groove edge polishing machine makes double miter-cuts (45°) in a single pass, this way the two parts perfectly glued together in 90°. The miter-cutting is performed with the polishing side of the working pi...
Villafranca di Verona, Italy
CMG Macchine Taurus
- Manufacturer: Taurus
The Taurus edge polishing machine is composed of the best materials on the market: 22 mm steel bench, covered with rectified stainless steel plates; all the machine parts which are in contact with water are in st...
Villafranca di Verona, Italy
CMG Macchine Taurus 565
- Manufacturer: Taurus
Behind the Taurus 565 edge polishing machine there is an advanced technological study that ranges from the realization of different projects, from a simple staircase step to a kitchen countertop. Technical featur...
Villafranca di Verona, Italy
Hot Selling Small Glass Edging Machine Portable Glass Edge Polishing Grinding Edging Beveling Machine With Reasonable Price
- Manufacturer: Jori
Product Introduction Hot Selling Small Glass Edging Machine Portable Glass Edge Polishing Grinding Edging Beveling Machine With Reasonable Price ZM9325-45 °machine is basic on glass straight line edging machine t...
$12,800 USD
Get financing
Est. $251/mo
Dalian, China