Used Woodworking in Bavaria, Germany

CHIPPER for all wooden surfaces

• Manufacturer: HMC 600

NEW MACHINE Type. QAC 600 Tomahawk We are pleased to offer: Chopping machine For the production of hewn wooden surfaces / beams etc. in the horizontal plane. You can also just brush. Type QAC 600 Maximum worki...

CLT & BSP production line 12000 mm x 3100 mm x 350 mm

• Manufacturer: MINDA - REICHENBACHER - WEINIG

I am currently offering: A new and completely closed-loop production line for Production of CLT ��� CLT solid wood panels. Year of construction 2023 ��� Start of service mid-2024 Capacity approx. 25,000 m² per y...

HUNDEGGER SC 1

• Manufacturer: Hundegger

OFFER: HUNDEGGER SC 1 from late 2005 Photos of the machine assembled and disassembled… Hello, Currently, I can offer this Speedcut. One used SC 1, already disassembled by Hundegger. With only a 5-axis saw, i...

HUNDEGGER Speedcut SC 3 available from Dec. 25

• Manufacturer: HUNDEGGER

I am pleased to offer: HUNDEGGER SC 3 with extensive features. Available around December 2025 SC3-200 fully automatic cutting system Angle and tilt drive Automatic infeed system Cross feed conveyor (5 strands,...

HUNDEGGER SPM 2 panel cutting machine with 5 axes - fully equipped

• Manufacturer: HUNDEGGER

Wooden chair

Wooden bench

2009 DISPA SDT 315

• Manufacturer: DISPA

Control: conventional - | Storage location: Günzburg | Sawblade tiltable: 45° | Cutting width: 95 × 60mm | Motor output: 1.3 kW to 1.8 kW | Cutting height: mm | Saw blade diameter: 315mm | Table dimensions: mm |...

2025 Graule ZS 200N-F

• Manufacturer: Graule
• Model: ZS200NF

Suitable for:Wood, PVC, aluminum Crosscut and mitre saw with maximum cutting height of 200 mm Sturdy cast iron construction Precise ball bushing guide of the tool carriage on hardened and ground steel shafts Manu...

2025 Graule ZS170NF

• Manufacturer: Graule
• Model: ZS170
• Phase type: Three-phase

Mobile version, 3kW motor power Cutting height at 90°: 170 mm | Section length: 430 mm | Horizontal miter range: 45°-90°-25° | Vertical miter range: 60° - 90° - 30° | Swivel adjustment with crank: Yes | Roller co...

1988 Holzher 1112

• Manufacturer: Holz-Her
• Model: 1112

GS marking Roll: 4 | Speed: 2 - 30 m/min | Speed levels: 2 gearboxes, 2 motor, 2 gear changes (8)

2007 Martin T60 Classic

• Manufacturer: Martin
• Model: T60

GS test mark, CE marking Sled length: 3000 mm | Cutting width at the rip fence: 1250 mm | Cutting width at the crosscut fence: 3200 mm | Cutting depth: 120 mm | Scoring: No | Height adjustment saw blade: electric...

1996 Graule ZS 200 N

• Manufacturer: Graule
• Model: ZS200N

The circular cross-cut and miter saw type ZS 200 N or type ZS 200 is a compact and compact and clearly arranged saw for processing large-format cross-sections This machine is characterized by following features: ...

1996 Altendorf C45 compact

• Manufacturer: Altendorf
• Model: C 45

CE marking, GS test mark Sled length: 1500 mm | Cutting width at the rip fence: 700 mm | Cutting width at the crosscut fence: 2200 mm | Cutting depth: 100 mm | Scoring: No | Height adjustment saw blade: manual / ...

1999 Graule ZS135N

• Manufacturer: Graule
• Model: ZS135N

Cutting height at 90°: 135 mm | Section length: mm | Saw blade pivoting and tilting: Yes | Vertical miter range: -60° to +60° | Roller conveyor / support table: No | Number of revolutions: 2800U/min | Engine pow...