Used Welding Equipment in Bavaria, Germany

Spacer bracket D28 U-shape L500, steel 200 x 200 mm

• Manufacturer: Stahl

For use as table extension Clamping surface: 5-sided Diagonal grid 100 x 100 mm, with grid lines Distance angles with hardened surface are protected against adhesion of weld spatter, thus also less wear and tear ...

PS bolt D28 long

• Manufacturer: Lang

Connecting element for all system parts on table, perforated plates, etc. or for special fixtures. Very fast connection with simultaneously large clamping stroke Very high clamping force due to planetary gear eff...

Connecting sleeve D28 short with screw

Use as long-term connection Self-centering with countersunk head on both sides Suitable for system drillings Clamping by means of Allen key SW 10 Optimal for connecting welding tables with U-distances Burnished S...

Connecting sleeve D28 long with screw

• Manufacturer: Lang

Use as long-term connection Self-centering with countersunk head on both sides Suitable for system drillings Clamping by means of Allen key SW 10 Optimal for connecting welding tables with U-distances Burnished L...

PROFIPlusLINE Set 731 D22 with PPS bolt

Share: 77

PROFIPlusLINE set 721 D22 with PPS bolt

Share: 57

Screw clamp 180° with spindle

each tube can be used individually Adjustable projection can be inserted into the system bore, thus no unnecessary interfering edges highest power transmission due to stable round tubes complete clamping mechanis...

Clamping plate for flange 350 x 250 x 25 mm

Pipe flanges can be quickly and precisely pinned to the bolt circle by means of fixing bolts DIN 2633 Nominal widths DN 15 - DN 200 DIN 2632 Nominal widths DN 200 Incl. fixing bolts: 2 x Ø 13.8 mm 2 x Ø 17.8 mm 2...

Connecting sleeve

as connecting piece between two clamping tubes as connecting piece between screw clamp and clamping tube burnished

Deflection bush 90° with fine scaling in 15° steps

user-friendly 360° fine scaling especially practical in combination with push rod clamps can also be used in combination with short or standard spindles with threaded bushes centre distance 50 mm

Angle socket 90

Can be used as corner stop Centre distance 50 mm A in mm: 90° | B in mm: 28 | Weight in kg: 0,28

Performance screw clamp with spindle

new design universally applicable for horizontal, vertical and inclined clamping of workpieces by turning the holding tube the clamping spindle can be adjusted over 130 mm without changing the clamp (predecessor ...

Prism holder D28 with arbor ø 140 mm

Targeted pick-up of tubular elements up to Ø 400 mm Double prism for more possibilities, also suitable for rectangular tubes With screwed-in support tower Height adjustment via support sleeves for support mandrel...

Prism holder D28 with arbor ø 110 mm

Targeted pick-up of tubular elements up to Ø 180 mm Double prism for more possibilities, also suitable for rectangular tubes With screwed-in support tower Height adjustment via support sleeves for support mandrel...

Prism holder D16 ø 50 mm

Targeted mounting of tubular elements up to Ø 70 mm Screwed in by means of PS bolts Double prism for more possibilities Also suitable for rectangular tubes