Used in Schleswig-Holstein, Germany

MASTERWOOD EUMASPEED 316 - CNC Machining Center Wood

• Manufacturer: Masterwood

Compressor type: Ingersoll Rand T30 2475 DFT Connected load: 4.1 kW Areas of application: Drilling, grooving, milling Work table: - 6 quick-adjustable workpiece supports - 9 individually retrievable vertical dril...

SCM SINTEX Four-Sided Planer

• Model: Sintex

Machine no. FROM/090192 Built in 1995 Planning width max. 180mm Planing height max. 105mm Planner heads incl. Number of spindles: 4 pieces Spindle: bottom Spindle: right Spindle: left Spindle: great High/low adju...

BECK KONTRA Stack Gluing Press

• Manufacturer: Beck

5 floors Clamping depth 1050 mm 1 pressure beam -1500 mm long, 60 mm high, per floor 3 infinitely adjustable pendulum counter bearings, 400 mm long, per shelf 2 hold-downs with handwheel, per shelf 5 support arms...

BECK KONTRA Stack Gluing Press

• Manufacturer: Beck

5 floors Clamping depth 1050 mm 1 pressure beam -1500 mm long, 60 mm high, per floor 3 infinitely adjustable pendulum counter bearings, 400 mm long, per shelf 2 hold-downs with handwheel, per shelf 5 support arms...

JOHANNSEN T82K Long Belt Grinder

• Manufacturer: Johannsen

Motor data: 380 V - 50 Hz - 17 A - 7.7 kW Table dimensions: 2800 x 950 mm Height adjustment by handwheel Offset: 800mm Suction nozzle: 1 x 180 mm - 1 x 120 mm Sanding belt length: 7800 mm

GUBISCH B230 + 1P four-sided planner with 5th unispindle

Type B230 + 1 P 5 planing spindles, the 5th as a unispindle Machine works, but is unchecked, not cleaned, not overhauled Condition: dismantled and stored as at the previous customer Tech. Data: Diameter of spindl...

SCHUKO ECO VAR 97 Chip Filter with Rotary Valve

Chip extraction system SCHUKO EcoVar 97 Rotary valve chip container Filter area 375m² Total Vol. Flow 26.679m³/h Return air available including 4 extraction fans 15 kW, 11 kW, 2x 7.5 kW 1 transport fan 5.5 kW for...

SCHUBERT Heating Plate Veneer Press

Gold anodized heating plates works perfectly heats over the entire surface above and below Crimping dimensions 1300x2600mm

ADOLF ILLIG RDKP 54D - Thermoforming machine

• Manufacturer: Illig
• Model: RDKP54

The machine for preheating is included in the price. Built in 1999 Adolf ILLIG has a heating capacity of 47.3 KE, operating current 113 A The combination of forming, heating and punching station results in a prod...

2021 Imants Spading Machine 48SX300H

• Manufacturer: Imants

Spading machine 48SX300H includes: Powered harrow roller Quick-change system for spade blades Hydraulic strain relief PTO shaft (Walterscheid) with cam clutch LED lighting Up to 185 kW (250 HP) Working depth 15-3...

2014 Mayer Siloking DA 2300

• Manufacturer: Mayer
• Model: SILOKING DA 2300

Category: Other stable equipment

2012 Mayer SF 14 cbm

• Manufacturer: Mayer

SF 14 cbm - Lined with Silonox in 2022 - Mechanical counterblades - Mineral hopper - Camera in the rear and hopper - Discharge right and left - Tires 385/55 R22.5 front, approx. 40% - Tires 27x10-12 rear, approx....

2012 Vaderstad Rapid RDA 600S

• Manufacturer: Väderstad
• Model: Rapid
• Working width: 6 m
• no. of rows: 4 rows

Rapid RDA 600S Row spacing: 13 cm Fertilizer placement Following roller Seed rate adjustment Hydraulic lift arm

2004 Duport Alltrac 8044

• Manufacturer: Duport

Alltrac 8044 Design: Mounted Mounting Category: 3 Hydraulically foldable 44 discs Drip stop Depth control sensor Discs 15-20% Horizontal distributor Lighting system

BENTLEY GTC triple W 12 4WD convertible

Colour: Black Uni (ceramic-sealed) Upholstery: Nappa full leather black Transmission: automatic Drive: 4WD all-wheel drive Engine: Combustion engine, 12 cylinders Emission class: Euro 6 Chassis: Air suspension, a...