Used Circular Saws in Rhineland-Palatinate, Germany

Kölle Formatic

• Manufacturer: Kölle
• Model: FORMATIC

Circular saw Kölle Formatic - Year of manufacture 1997 - 5,5kW motor - 400 volts - Weight: 1050kg - Control panel on top - 4 speeds - electrical lifting, lowering & swiveling - digital display limit - Cu...

Automatic saw and 8x punching

0 – 300 mm adjustable pneumatic material feed and digital display Vertical hydraulic punching unit to the right of the saw blade Power 600 KN Punching tools according to profile shape Aluminium profile – finished...

MG9 Automatic circular saws

The high-performance swarf extractor MG9 has an automatic rotary valve and can be operated either continuously, or controlled be an automatic saw. The Aluminum chips fall from the rotary valve into a collection b...

MG3 Automatic circular saws

The MG 3 chip extractor collects dust and chips in a movable 172-litre container. It has two suction outlets (with nozzles) with a diameter of 100 mm and can be operated either in continuous operation or controll...

EISELE VMS-II-S PV Type-Nr. 421

• Manufacturer: Eisele
• Model: VMS-II

Description EISELE – Semi-automatic VMS-II-S PV Type No. 421 Features: – semi-automatic vertical cold circular saw – pneumatic material quick-clamping device – Infinitely variable saw blade feed – Roller conveyor...

Prisma 400

Manual end notching saw to work the ends of aluminium or PVC profiles Use of saw blades Ø 400 mm vertical and horizontal Manual operation with slidable supporting table 2 x 3,0 KW, 400 V, 50 Hz Pneumatic profile ...

Profilma 502ST

For cutting to length and punching aluminum profiles. Fully automatic operation with graphic controls. Drive 7,5 kW, S6, 400 V, 50 Hz, 2850 rpm. For use of saw blades Ø 500 or 550 mm. Siemens S7 control with touc...

Profilma 250

The high-performance automatic saw Profilma 250 is designed for cutting aluminum and non-ferrous metals to length with a particularly thin saw blade. Depending on the version, solid carbide circular saw blades Ø...

Prisma 650E / 652

Variable notching possibilities for mullion and transom combinations, e.g. curtain walls, winter garden, sky lights and special designs. Notch variation: rectangle, one sided angular, two sided angular, 3 sided a...

GS 350M

For sawing aluminum and plastic profiles. Manual handling, saw cut from bottom to top. Drive 2.2 KW, 400 V, 50 Hz. Use of HM saw blades Ø 350 mm. Manual miter setting 30 ° – 90 ° – 0 ° with scale. Air gun with sp...

GS 600

For aluminum and plastic profiles. Drive power 5.5 kW, 400 V, 50 Hz 3,000 rpm. Hydropneumatic saw feed from below. Manual miter adjustment between 20 ° – 90 ° – 20 ° with electronic digital display. Halftone dots...

TDC 622

5 axis control, all axes can be moved by motor. The left saw unit firmly on the base, the right saw can be moved by motor. Motorized swiveling to 45 ° – 160 °. Motorized tilt inwards 45 ° – 90 °. Intermediate deg...

GS 550

For Aluminium- and PVC-Profiles Motor 7,5 KW, S6, 400 V, 50 Hz Hydro-pneumatic saw blade feed bottom up Use of TCT blades Ø 550 mm Big cutting capacity Capacity up to 190 mm Cutting range up to 350 mm 2 vertical...