Used Hydraulic Presses in Saxony, Germany

2003 hydraulic Workshop Press Zeppelin

• Manufacturer: Zeppelin
• Stroke length: 400 mm
• Power requirement: 4.8 kW

HYDRAULIC DOUBLE COLUMN PRESS Special construction welded from 25 mm sheet steel Operating mode: single stroke Punch holder: pin M 70 x 2.5mm and punch Ø 128 x 440mm Table protection housing Round punch Ø 130 x 1...

Single Column Press - Hydraulic EIGENBAU

• Manufacturer: Eigenbau
• Daylight: 350 mm

Punch holder with M24x60mm internal thread Hydraulic power unit Röhm-Gamet, type 1E1 HS299, pressure 38bar, tank capacity approx. 50 liters One-hand operation

WMW Press

• Manufacturer: WMW
• Power requirement: 17 kW

Hydraulic single-column press WEMA ZEULENRODA PYE160/S/1M conventional control Without tables can be purchased separately Mechanical ejector available

SOM TEC Press

• Power requirement: 18 kW

Hydraulic press SOM TEC VSF 1 passage height 520 mm conventional control Description 950 kN press serves as a shaping machine for ceramic laminates, in which tool carriers with adjustable pins press from above ag...

W+B test press

Hydraulic test press WALTER + BAI AG 200 kN D-200-D / CSRG-5501 380 V

REMAK hydr. press

Hydraulic press REMAK ESM12 used , tested ! Dimensions: 1.550 x 850 x 2.000 mm

WEMA ZEULENRODA double column press

• Manufacturer: Zeulenroda
• Power requirement: 47 kW

Double column press - hydraulic WEMA ZEULENRODA PYZ 250 with deep drawing device !!! Machine fits into 40' foot container

DUNKES Hydraulic press

• Manufacturer: Dunkes
• Power requirement: 45 kW

Hydraulische Presse DUNKES HZS 160 Druck/zeitabhängig steuerbar Zweihand- und Fußbedienung gebraucht, geprüft ! Video:

Hydraulic press Neff 4 S20Z

• Manufacturer: Neff

Pressing force [kN]: 40 Table size [mm]: 320 x 220 Installation height [mm]: 200 mm

STROMAG hydraulic brake

Hydraulic brake, Brake, Hydraulically released spring-applied multi-disc brake STROMAG KMB 80 H 276119/10 777X00315 as good as new, tested ! (installed and dismantled again)

2011 KUNKEL DZ 160

• Manufacturer: KUNKEL

ex Works, loaded free, truck pressure 160 t Minimum support distance 550 Maximum support distance 1550 Max. workpiece width 400 cylinder stroke 450 mm daylight - horizontal 400 mm total power requirement 18,5 kW ...

FRIMO Pressure Transmitter Double Punching Machine – Year 2008 – Precision Punching Technology

general • Brand: FRIMO • Type: Double punching line • Year of construction: 2008 • Serial number / Com No.: 1819101-0 / S.18191.0040 • Capacity (t): 50 t • Drive: Electric-hydraulic • Number of columns: 4 columns...

1978 VEB PRESSENBAU DESSAU PYXWM 160

• Manufacturer: VEB PRESSENBAU DESSAU
• Stroke length: 500 mm
• Power requirement: 11 kW

HYDRAULIC HORIZONTAL MULTI-PURPOSE PRESS TÜV test until 02/2024 Details of the counter frame: Size W: 1720 x H: 690mm Counter support U-support = Ø 225mm x depth = 450mm Manual horizontal displacement: max. lengt...

1985 WMW Zeulenroda PYTE 3.15

• Manufacturer: Zeulenroda
• Model: PYTE 315
• Stroke length: 280 mm
• Daylight: 355 mm

The single column press stands on a lower table (welded steel plate) Operation via foot switch The press has been modified -intake for foil for punching device -punching device FIBRO (plastic disc with Ø 47,5mm f...

WMW Zeulenroda PYTE 2.5x150

• Manufacturer: Zeulenroda
• Stroke length: 280 mm
• Daylight: 355 mm

Press with mechanical 2-hand operation. Pressure test up to 2,3to performed. Good condition.