Used Packaging Machinery in Germany

Soft mass former OTTO KREMMLING - Type Automat TBA-600/1, built in 2004.

Horizontal flow wrapper OTEM - Type H-100, horizontal operation.

• Manufacturer: Otem

second-hand bar wrapping machine - SIG type DSH as two-station machine.

• Manufacturer: SIG

The machine is set up for wrapping chocolate bars in a two-step process. A plate link conveyor leads the bars to the first wrapping station, whereby the aluminum foil is pulled from the reel for the inner wrap. T...

2004 Ultra sonic banding machine ATS US 2000 AB Cornerline

• Manufacturer: ATS
• Model: US-2000

Ultra sonic banding machine ATS US 2000 AB Cornerline; good condition; cleaned and checked by the support of ATS Germany; band width 30mm; frame size 360x160mm; min. product width 80mm, max.165mm; max.product len...

Second hand Mould and cooling roll WOLF - type F-1250

• Manufacturer: Wolf

incl. rotation connector for cooling water feed-through. The roller is installed in a stable tubular frame and can be adjusted in working height up to 60 mm. The roller surface is ground and hard-chrome plated. ...

Stainless steel sink with shelf

second-hand bar wrapping machine - SIG type DSH as two-station machine.

• Manufacturer: SIG

The machine is set up for wrapping chocolate bars in a two-step process. A plate link conveyor leads the bars to the first wrapping station, whereby the aluminum foil is pulled from the reel for the inner wrap. T...

Second-hand bar wrapping machine - SIG type CK.

• Manufacturer: SIG

This unit is a one-station packing machine to wrap deposited bars and wafer products. Two packing materials are wrapped around the product in one working cycle. The inner wrap is made with aluminum foil from the ...

bar wrapping machine LOESCH - type LTM-GR for bars of 100 g

• Manufacturer: Loesch

Year of manufacture 1996 The machine is suitable for all types of bars and other rectangular products. In the packing process, aluminum foil is pulled off the reel and the label off the box in one step. The wrap...

Floor scale

90° curve table SOLLICH - Type GT-420-90°R with approx. 420 mm working width.

• Manufacturer: Sollich

OPTIMA clipping machine - Type CH2a

• Manufacturer: Optima

IBAG discharge skip conveyor - approx. 400 mm working width and 3 meters length

• Manufacturer: IBAG

Belt infeed table SOLLICH - Type 2.2 m transport table 520, built in 2017.

• Manufacturer: Sollich

The table was used as an infeed table on a TC-420 enrobing machine. However, the belt table has a working width of approx. 520 mm and a length of 2.2 meters.

Label dispenser MARC-O-PRINT - Type 8-8