Used Machine Tools in Saxony, Germany

FIXATOR machine feet

• Manufacturer: Pagus

Machine foot set ( 2 pieces each ), wedge feet, leveling shoe FIXATOR with level raising Ø 100 mm x 50 mm M20 anchor bolt 2 pieces each used, tested !

2011 Mühlbauer SOL800T

• Manufacturer: Mühlbauer

Individual component from overall system Assembly/test line for contact hole punching, longitudinal cut, on 6 x 31 mm tape width, tape width 2x200 mm, 12x31 mm, tape length 3000 m, capacity 2x 10 MW, consisting ...

2013 Rexroth IndraDrive Fc

• Manufacturer: Bosch - Rexroth

frequency converter

DIXI micro drill

• Manufacturer: Dixi

Micro drills, head drills, drill bits, 43 pieces DIXI Carbide Circuit Board Drills Type 1139 Other quantities on request ! New !

MPK Micro Drill

Micro drills, head drills, drill bits, 34 pieces MPK Type SD30-E SD30 E-0700085-0 Other quantities on request ! New !

WMW machine vice

• Manufacturer: WMW

Machine vice WMW SX/1-160 TGL 34180 New ! Back wide: 160 mm | Back height: 48 mm | Span: 0...200 mm | Dimensions ( machine vice ): 505 x 160 x 135 mm

WMW machine vice

• Manufacturer: WMW

Machine vice WMW SX200 used, tested ! Back wide: 200 mm | Back height: 63 mm | Span: 0 - 300 mm | Dimensions: 705 x 200 x 150 mm

WMW machine vice

• Manufacturer: WMW

Machine vice WMW SND 125 used, tested ! Back wide: 125 mm | Back height: 40 mm | Span: 0...100 mm | Dimensions: 350 x 130 x 105 mm

RÖHM machine vice

• Manufacturer: Röhm

Machine vice RÖHM RS 711 used, tested ! Back wide: 200 mm | Span: 190 mm | Back height: 60 m | Dimensions: 500 x 290 x 150 mm

PAGUS machine vice

• Manufacturer: Pagus

Machine vice PAGUS used, tested ! Back wide: 140 mm | Back height: 50 mm | Span: 0...110 mm | Dimensions: 420 x 140 x 110 mm

PAGUS machine vice

• Manufacturer: Pagus

Machine vice PAGUS on rotary table with graduation 360° rotatable

WMW machine vice

• Manufacturer: WMW

Machine vice WMW used, tested ! Back wide: 200 mm | Back height: 60 mm | Span: 0...160 mm | Dimensions: 560 x 205 x 155 mm

WMW machine vice

• Manufacturer: WMW

Machine vice WMW, ROTO RECORD SN 160 used, tested !

WMW twist drill

• Manufacturer: WMW

Twist drills WMW, WERKÖ Ø 90,0 HSS used, tested ! Diameter: Ø 90.0 mm | Cutting angle: 118° | 481 heures: HSS | Morse taper: MK5 | Overall length: 482 mm | A-measure: 265 mm | Span length: 235 mm | Dimensions ( p...

WMW twist drill

• Manufacturer: WMW

Twist drills WMW, WERKÖ Ø 66,0 HSS used, tested ! Diameter: Ø 66.0 mm | Cutting angle: 118° | Cutting fabric: HSS | Morse taper: MK5 | Overall length: 427 mm | A-measure: 268 mm | Span length: 235 mm | Dimensions...