Used Machine Tools in Saxony, Germany

1970 WMW AP 800x630

• Manufacturer: WMW

surface plate with squares 100x100mm - on a frame Type of control: other | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 1 | Table length: 800 mm | Table width: 630 mm | Table height: 160...

Clamping Units WMW

• Manufacturer: WMW

Diese Spannmittel werden im kg-Preis bei Gesamtabnahme verkauft. Bitte beachten Sie die Ausweisung auf den Fotos!

1980 WMW 640x465x90

• Manufacturer: WMW

Type of control: other | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 3 | Length: 640 mm | Width: 465 mm | Thickness of clamping plate: 90 mm | Weight of the machine approx.: 70 kg

WMW AP255x140x65

• Manufacturer: WMW

very good steel plate for sale free, packed in oiled paper and foil Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 10...

WMW AP205x195x65

• Manufacturer: WMW

14 plates available T-slots according to DIN 650 for T-slot nuts according to DIN 508 a=13.9; b= 24.2; c= 9.8; h=19.9 mm

Clamping Units Rottler

• Manufacturer: Rottler

4 pieces clamping claws Dimension per clamping claw: L: 420 x W:400 x H: 400mm Clamping surface 80 x 80mm, clamping on both sides Clamping travel approx. 120mm Clamping width flexible Mounting: -Base area LxW: 42...

Clamping Units SEDIN STANKO

• Manufacturer: Sedin

These 4x clamping claws are for sale. Used as workpiece clamps for turning and drilling work Cast steel construction Workpiece holder: Clamping surface WxH: 70 x 65mm, internal and external clamping, clamping str...

WMW 800x455x250

• Manufacturer: WMW

ram plate of a PYE 160S press Use: e.g. for reducing the installation height of the press or shortening the working distance (forward run) - with centre bore Ø 40mm continuous - with 6x part circular drilling Ø 1...

WMW 810 x 690 x 190

• Manufacturer: WMW

T-slots centric Type of control: other | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 3 | Floor-plate length: 810 mm | Plate width: 690 mm | Plate height: 190 mm | Hole diameter: ca. 119...

bolster plate AP 3500x2000x360 (5768)

There are 2 plates for sale. (price per plate) Surface milled Longitudinal groove Quantity 8 Size a=35mm,h=62mm,b=60mm,c=25mm Center distance 250mm Side fastening D=27x58mm Quantity long side 3 short side 2

1986 NARADI PRAHA JU 30

• Manufacturer: NARADI PRAHA

air pressure clamping unit application area operation of vise clamping consists: air pressure motor, impuls mechanism and a control mechanism air pressure supply necessary averaged operation pressure 0,4- 0,6 MPa...

WMW AW 300x340x150

• Manufacturer: WMW

Type of control: other | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 1 | Table length: mm | Table width: mm | Table load: t | Width: 300 mm | Depth: 150 mm | Height: 340 mm | Weight of...

WMW AW 400x335x500 (Nr.15)

• Manufacturer: WMW

T-slot to DIN 650: T-slot width a= 22; h= 39.5; b= 40; c= 17.5 mm, T-slot spacing 125 mm

nicht bekannt MP 200

• Manufacturer: nicht bekannt

PERMANENT MAGNETIC ROUND PLATES distance between 5x magnetic cores 36mm, width 20mm force operation 8mm square key (not included)

Angular Clamping Device WMW

• Manufacturer: WMW

Execution of the clamping surface vertical: H: 1150mm; W: 1005mm; surface finished, 49 pcs. threaded holes M24; sideways 7 pcs. semicircular recessesØ 100 x 82 mm (each side) Execution clamping surface foot: L: 5...