Used Machine Tools in Saxony, Germany

angle table nicht bekannt

• Manufacturer: nicht bekannt

Angle extension table - machine table - machine clamping table with 33 x clamping holes M24 vertical mounting side: W x H: 800 x 450mm with 4 clamping grooves Ø 30 x 75mm

WMW SP 5040x2230x460

• Manufacturer: WMW

Machine table can be used as clamping plate. - material - cast steel - clamping surface 4100 x 2230mm - outlet part lateral (at the side) = W: 2110 x L: 1040mm T-slots according to DIN 650 - b=54.0; c=21.0; h=55....

bolster plate AP 2500x1250x100 (Nr.1-2)

Cast steel The plates are machined before the T-slot with 75mmx60mm(recessed) Table surface 2530mm X 1245 mm Longitudinal slot: Number: 5 Size:a=32, h=53, b=54, c=23mm Center distance 250mm 2 slots Chamfered 8 th...

1994 WMW 620x160

• Manufacturer: WMW

4 jaws faceplate flange intake/diameter : passage drill hole 160 mm flange diameter 197mm hole circle 235mm jaws are single guided with chuck key The given info are approx. values!

ALLMATIC basic B 160

• Manufacturer: ALLMATIC

Type of control: other | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 1 | Jaw width: 160 mm | Weight of the machine approx.: 13,5 kg | Space requirements of the machine approx.: m | Spa...

HOFFMAN LK 630 - G 17

• Manufacturer: Hoffmann

Face Chuck - 3-Jaw chuck Type of control: conventional | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 1 | Diameter: 630 mm | Weight of the machine approx.: ca. 275 kg | Transport dimensi...

Roto Rekord 250x4

• Manufacturer: Roto Rekord

4-Jaw Chuck without Flange - width of the main body 79mm - with internal jaws - flange intake Ø 210 x 4 mm, mounting with 3x M12x30 mm screws, pitch circle Ø 230mm

1985 WMW 500

• Manufacturer: WMW
• Model: 500

face slide with 4 clamping chucks (clamping travel 60mm) clamping area internal: 145-500mm and external 140-420mm flange intake size= dia. 200mm with clamping bolts equipment: socket wrench

Röhm SSH 200/3 (Nr. 43)

• Manufacturer: Röhm

stationärer Spannstock SSH 200 Kraftspannfutter, hydraulisch Kraftspannung 53 kN Merkmale: Futterflansch Ø 280 x 17mm mit Spann-Nut 4x / 18x30mm Grundflansch Ø 290x30mm Flanschaufnahme Ø 140x10mm 20 Satz div. For...

Röhm Duro-NCES 260 77/3 (37)

• Manufacturer: Röhm

Merkmale: neuwertig automatisches spannen Spannbereich außen 120mm Spannbereich innen 50mm Flanschenaufnahme innen Ø170 x 6mm

SMW Autoblock 105510 (Nr.40)

• Manufacturer: SMW Autoblock

Power chuck, automatic clamping Features: Equipped with forming jaws Clamping range min./max. 60 / 320mm Flange mounting Ø 295x5mm inside; mounting 3x holes Ø 21mm and pitch circle Ø 230mm

Forkardt KS 400 (Nr. 45)

• Manufacturer: Forkardt

Power chuck, mechanical Features: Power flange AKS 315/5 Clamping range min./max.: 60/240mm Flange mounting size Ø 300x5mm inside; fastening 3x hexagon socket screws Ø 20mm and 3x holes Ø 20.5mm / pitch circle Ø ...

WMW PS 300

• Manufacturer: WMW

technical features: - 4 jaw chuck, manual feed, clamping range: outside= max. Ø 280mm as well as inside=min. Ø 40mm

Tool milling machine TOS FN 20

• Manufacturer: TOS

Table size [mm]: 600 x 240 Tool holder: SK 40 Speed range [1/min]: 50 - 2500 Travel [X / Y / Z mm]: 300 / 200 / 350 Equipment / accessories: Vertical head with quill, counter bearing

Stimin FUS 32 tool milling machine

Table size [mm]: 950 x 450 Tool holder: SK 40 Speed range [1/min]: 25 - 2000 Equipment / accessories: Digital display Sony in 3 axes, milling head can be swiveled down with manual quill, counter bearing, coolant ...