Used Lawn & Turf Equipment in Baden-Württemberg, Germany

2001 Separation Technology & Equipment Construction GmbH (T & A) MZ 500 L

• Manufacturer: Trenntechnik & Anlagenbau GmbH (T & A)
• Capacity: 0.05 m³

Centrifuge for chips T&A MZ 500 L - Wiring diagram available LxWxH 1.0x1.0x1.2 meters

ERD pillar drilling machine type B35/40

ERD Pillar Drill Type B35/40 -Manufacturer: Ing. Ewald Riens, Junior, Bodenburg near Hildesheim -Machine type: ERD B35/40 -Design: Pillar drill with gear drive -Drilling capacity in steel up to 50 mm -Spindle mou...

Steel angle large

Large Steel Angle Bracket LxWxH 720mmx650mmx1550mm Thickness 65mm Weight 630kg

Workbench with 7 drawers and a swing door

Workbench with 7 drawers and a swing door LxWxH 1750mmx710mmx850mm 4 small drawers LxWxH 400mmx540mmx60mm 2 medium drawers LxWxH 400mmx540mmx110mm 1 large drawer LxWxH 400mmx570mmx160mm 1 swing door LxWxH 450mmx6...

Workbench with vice from Schlegel

Workbench with Schlegel Vice LxWxH 1500mmx710mmx900mm 2 Small Drawers LxWxH 490mmx490mmx50mm 1 Large Drawer LxWxH 490mmx560mmx150mm 1 Swing Door LxWxH 530mmx560mmx360mm 1 Schlegel Vice Jaw Width 125mm

VOEST DA 360 - Leader & live-tool headstock turning machine

• Manufacturer: Voestalpine

VOEST DA 360 - Leader & live-tool headstock turning machine - Heidenhain digital readout - Center height above bed 400mm - Swing over bed 800mm - Swing over support 500mm - Turning length 1000mm - Bar through cap...

Workbench from Bott

Bott Workbench LxWxH 2000mmx700mmx840mm -2 drawers LxWxH 535mmx520mmx90mm -2 hinged doors LxWxH 630mmx560mmx360mm -1 compartment LxWxH 630mmx560mmx510mm

NIKKEN 5 AX - 170 CNC - rotary table incl. controls

• Manufacturer: Nikken

NIKKEN 5 AX - 170 CNC Rotary Table including Controls -The NIKKEN / 5 AX - 170 is a compact and robust CNC swivel table for precise milling and drilling work in 4 and 5 axes -Complete documentation available -Rot...

Anvil Small

Small anvil L x W x H 500 x 250 x 250 mm Weight approx. 40 kg

WEILER CONDOR incl. new 3-axis digital display

• Manufacturer: Condor

WEILER Condor center lathe including new digital display. - Original paint finish - Three-jaw chuck 200 mm / NEW - Collet chuck including collet set / NEW - Multifix base holder + inserts / NEW - Electric chuck g...

Graule Type: AGT table saw

• Manufacturer: Graule

-AC brake motor 220 volts, 1.6 kW, 2800 rpm -Saw blade diameter 300 mm -Saw blade mounts (bore) 40 mm -Table saw table 500 x 400 mm -Extraction nozzle diameter 75 mm -Machine without base frame and without trolle...

Transport chains Thiele Germany

• Manufacturer: Thiele

Thiele Germany Transport Chains -Load capacity at a 45-degree angle: 45,000 kg -Load capacity at a 60-degree angle: 31,500 kg -Chain length: 4.0 meters

RECKERMANN KOMBI 1300 - Heidenhain TNC 114B

• Manufacturer: Reckermann

RECKERMANN KOMBI 1300 - Heidenhain TNC 114B -Knob-mounted milling machine with TNC114 B linear control (NC path control) -Year of manufacture 1987 -Vertical condition, very good -Travel X/Y/Z 1020x320x450mm -Work...

WEILER CONDOR VS 2 from University (test laboratory)

• Manufacturer: Condor

WEILER CONDOR VS 2 from the University (Test Laboratory) -Guideways "As Good as New" -Center height 165mm -Swing diameter over bed 330mm -Center width 800mm -Speed range 28-2800 rpm -Automatic longitudinal/transv...

Bosch Scintilla SA 2 607 220 133 scraping machine / hand scraper

• Manufacturer: Bosch

Bosch Scintilla SA 2 607 220 133 Scraper / Hand Scraper -Type number 2 607 220 133 -Voltage 220 V -Power 220 W -Current consumption 1.05 A -Code number 332