Processing » Injection Molding » Hydraulic Injection Molding » Germany

Search By Manufacturer

Search By State

Building Filters

44

Used Hydraulic Injection Molding in Germany

  • Trusted Seller
    2007 Arburg 420A 1000-400

    2007 Arburg 420A 1000-400

    • Manufacturer: Arburg

    This Arburg 420A 1000-400 was manufactured in 2007. It features electromechanical main movements by servo drives, a modular plasticizing unit with adaptive temperature control, and a five-point double toggle clam...

    Germany
  • Trusted Seller
    2005 SUMITOMO SHI DEMAG El-Exis

    2005 SUMITOMO SHI DEMAG El-Exis S 250/630-1450

    • Manufacturer: Demag

    This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 was manufactured in 2005. It features a central accumulator for high-speed injection and chromed tie bars. The pump drive power is 22.0 kW, with a mains voltage of 4...

    Germany
  • Trusted Seller
    2019 DEMAG Systec 210/580-840

    2019 DEMAG Systec 210/580-840

    • Manufacturer: Demag
    • Model: SYSTEC 210580-840

    This DEMAG Systec 210/580-840 was manufactured in 2019. It's a hydraulic injection moulding machine with a clamping force of 210 tons and a power output of 60 kW. It has been used for 31,132 operating hours. Cons...

    Germany
  • Trusted Seller
    2018 HAITIAN JU13000/IIH

    2018 HAITIAN JU13000/IIH

    • Manufacturer: HAITIAN

    This HAITIAN JU13000/IIH was manufactured in 2018. It features a robust hydraulic injection moulding system with a screw diameter of Ø 110 mm and an injection unit of 8400. Powered by AC 400 V, 3-phase + N, 50 Hz...

    Germany
  • Trusted Seller
    2021 Netstal Elion 800-270

    2021 Netstal Elion 800-270

    • Manufacturer: Netstal

    This Netstal Elion 800-270 was manufactured in 2021. It features a robust AXOS control system and a high-speed injection unit capable of 450 mm/s. The machine includes a screw diameter of 40 mm and a fully integr...

    Germany
  • Trusted Seller
    2012 SUMITOMO SHI DEMAG El-Exis

    2012 SUMITOMO SHI DEMAG El-Exis S250/630-1600

    • Manufacturer: Demag

    This SUMITOMO SHI DEMAG El-Exis S250/630-1600 was manufactured in 2012. It features a clamping force of 2500 kN, a screw diameter of 50 mm, and a shot weight maximum of 482 g. The machine has a dry cycle time of ...

    Germany
  • Trusted Seller
    2016 HAITIAN JU9000II/6800 PLUS

    2016 HAITIAN JU9000II/6800 PLUS

    • Manufacturer: HAITIAN

    This HAITIAN JU9000II/6800 PLUS was manufactured in 2016. It features a clamping force of 9000 kN and an injection unit with a capacity of 2362 cm³. Operating on a 400 V / 50 Hz power supply, it consumes 199 kW a...

    Germany
  • Trusted Seller
    2014 DEMAG Systec

    2014 DEMAG Systec

    • Manufacturer: Demag

    This DEMAG Systec was manufactured in 2014. A robust hydraulic injection moulding machine, it features a clamping force of 6,500 kN and an injection unit size of 2,300. With dimensions of 5500x2600x3000 mm and a ...

    Germany
  • Trusted Seller
    2004 Arburg 720 S 3200

    2004 Arburg 720 S 3200 -1300

    • Manufacturer: Arburg

    This Arburg 720 S 3200 -1300 was manufactured in 2004. A hydraulic injection moulding machine featuring an operating voltage of 400 V, control voltage of 24 V, and a total connected load of approximately 39.0 kW....

    Germany
  • Trusted Seller
    2002 Krauss Maffei 150-520 C2

    2002 Krauss Maffei 150-520 C2

    • Manufacturer: Krauss-Maffei
    • Model: 150-520 C2

    This Krauss Maffei 150-520 C2 was manufactured in 2002. It features a screw diameter of 40 mm and includes a Sepro robot and a storage conveyor belt from 2014. The machine is operational, with pump operating hour...

    Germany
  • Trusted Seller
    2018 HAITIAN JU12000III

    2018 HAITIAN JU12000III

    • Manufacturer: HAITIAN

    This HAITIAN JU12000III was manufactured in 2018. A robust hydraulic injection moulding machine, it features a power supply of AC 400 V, 3-phase + N + PE, 50 Hz, and an input power of 148 kW. Rated current stands...

    Germany
  • Trusted Seller
    2010 Arburg 470 S 800-170

    2010 Arburg 470 S 800-170

    • Manufacturer: Arburg

    This Arburg 470 S 800-170 was manufactured in 2010. A hydraulic injection moulding machine featuring a clamping force of 80 tons and tiebar spacing of 470x470 mm. It operates on 400 V 3~ 50 Hz with a total connec...

    Germany
  • Trusted Seller
    2014 Arburg 520 H 1500-400

    2014 Arburg 520 H 1500-400

    • Manufacturer: Arburg

    This Arburg 520 H 1500-400 was manufactured in 2014. It features a closing force of 150 tons and a screw diameter of 35mm, suitable for precision hydraulic injection moulding. Operating on 400V, it has a total co...

    Germany
  • Trusted Seller
    2014 FERROMATIK K-TEC 200 2F

    2014 FERROMATIK K-TEC 200 2F

    • Manufacturer: K-Tec

    This FERROMATIK K-TEC 200 2F was manufactured in 2014. A robust hydraulic injection moulding machine, it features a screw diameter of 18 mm and a clamping force of 200 KN. Ideal for working with materials like AB...

    Germany
  • Trusted Seller
    2010 Engel 750/160 Spex

    2010 Engel 750/160 Spex

    • Manufacturer: Engel

    This Engel 750/160 Spex was manufactured in 2010. It is a hydraulic injection moulding machine featuring a 55mm screw diameter, core pull, ejector plate safety device, and a 6-way water distributor. If you are lo...

    Germany
123

Overview

Hydraulic injection molding machines use hydraulic systems to inject molten plastic into molds. They deliver high clamping force and are well suited for large, thick-walled, or high-volume parts where brute force and durability matter. Key specs include clamping tonnage, shot size, injection pressure, screw diameter and control type. Used hydraulic machines can offer strong value but require careful inspection of hydraulics, seals, screws, and controls.

FAQ

What should I check when buying a used hydraulic injection molding machine?

Review maintenance records, cycle count, condition of hydraulics (leaks, pumps, valves), screw and barrel wear, platen and tie-bar alignment, control panel and wiring, and spare-parts availability. Ask for operational videos or a trial run.

How do I arrange safe shipping for a hydraulic injection molding machine?

Drain hydraulic and cooling fluids, secure moving parts, protect electronics, and use a heavy-equipment transporter with cranes or forklifts. Provide exact weight and dimensions, insure the shipment, and check permits for oversized loads.

What regular maintenance keeps a hydraulic injection molder reliable?

Daily checks: hydraulic oil level, leaks, heater function and temperature stability. Weekly/monthly: change filters, inspect hoses and seals, grease points, and test safety interlocks. Periodically perform oil analysis, screw/barrel inspection, and control calibration per manufacturer guidelines.