2026 Krampe HP 20 Carrier
- Manufacturer: Krampe
- Model: HP 20 CARRIER
Loading volume: 12,1 m³ | Tyre equipment: 650/65R26.5 | Number of axles: 2
Gülzow-Prüzen, Germany
2026 Meiller Stahlmulde MHKS 41/3-S, Schütte, Liftachse
- Manufacturer: Meiller
- Model: MHKS41/3
ABS EBS Air suspension According to our "General Terms and Conditions" without any warranty, we can offer you the following vehicle today on a non-binding basis until conclusion, error, typographical error & stoc...
Hagenow, GermanyOehler OL ZDK 180 U Dreiseitenkipper
- Manufacturer: Oehler
Compressed air brake system: Yes | Tyre equipment: 560/ 45 R22.5 | Construction type: three-side | Place-upon attachments: Steel | Tarpaulin: Yes | Number of axles: 2
Conow tilting bridge with wide-wall superstructure 80 cm high, variant 2.1
- Manufacturer: Conow
Floor panel 4 mm thick Profiled laser-welded drop sides Front and rear wall and right-hand side are firmly welded to the tipper body Left-hand full-length pendulum dropside with full-length central locking, opera...
Feldberger Seenlandschaft, Germany
Conow tipper bridge with body 95 / 90 cm high
- Manufacturer: Conow
- left side tiltable (on request tiltable to the right side) - left sides with longitudinally divided profiled laser-welded drop sides, - left side is equipped with upper pendulum drop side and lower drop side - ...
Feldberger Seenlandschaft, Germany
Conow tipper bridge with combined body 95 / 90 cm high
- Manufacturer: Conow
- left side tiltable (on request tiltable to the right side) - right side with continuous side wall firmly welded - the left side with two longitudinally divided drop sides reinforced by 3 vertical - by 3 vertica...
Feldberger Seenlandschaft, Germany
Conow HW 80 V4.1
- Manufacturer: Conow
Tipping bridge with combined superstructure V4.1 - Tipping bridge with combined superstructure 120 cm high - tiltable to the left (tiltable to the right on request) - end wall and rear wall are continuous drop si...
Feldberger Seenlandschaft, Germany
Conow HW 60 V1 standard version
- Manufacturer: Conow
This design is the conventional superstructure as we have known it for years with the trailers HW 80 and HW 60. This body is characterized by its versatility, whether for loading grain to transporting manure or b...
Feldberger Seenlandschaft, Germany
Conow HW 60 V2.5
- Manufacturer: Conow
- Tilting bridge with wide wall structure 95 cm high - tiltable on both sides with two center stanchions - front and rear walls are firmly welded to the tipper body - both sides with pendulum tailboards, center s...
Feldberger Seenlandschaft, Germany
Conow HW 80 V4
- Manufacturer: Conow
Tipping bridge with multi-purpose superstructure V4 - tipper bridge with wide wall body 120 cm high - left side tiltable (or right side tiltable on request) - left side with two pendulum drop sides, middle stanch...
Feldberger Seenlandschaft, Germany
Conow HW 60 V2.2
- Manufacturer: Conow
- Tilting bridge with wide wall structure 95 cm high - tiltable on one side, with a middle stanchion - front and rear walls are firmly welded to the tipping bridge - one side: continuous dropside, firmly welded t...
Feldberger Seenlandschaft, Germany
Conow - Tipping bridge with wide wall 95 cm high
- Manufacturer: Conow
- tiltable on one side, without center stanchion - Tilting bridge on the tilting side with reinforced outer frame profile 6 mm, - front and rear walls are firmly welded to the tipping bridge, - one side: continuo...
Feldberger Seenlandschaft, Germany
Conow HW 60 V4.1
- Manufacturer: Conow
- Tipping bridge with combined body 120 cm high. - End wall and rear wall are continuous drop sides and firmly welded to the tipping body - right side wall with two drop sides and middle stanchion also firmly wel...
Feldberger Seenlandschaft, Germany
Conow HW 60 V4
- Manufacturer: Conow
- tipping bridge with wide wall 120 cm high - left side tiltable - left side with 2 pendulum drop sides, center stanchion and central locking system, - right side with continuous drop sides, firmly welded, - fron...
Feldberger Seenlandschaft, Germany
Conow HW 80 V2.1
- Manufacturer: Conow
- Tilting bridge with wide wall 95 cm high - tiltable to the left (tiltable to the right on request) - without center stanchion - Tilting bridge on the tilting side with reinforced outer frame profile 6 mm - fron...
Feldberger Seenlandschaft, Germany
Tip: Enter manufacturer, model or keyword
