Used Rotary Tables

Haas HTS-6

• Manufacturer: Haas

Lot 124 Haas HTS-6 Tailstock, Hand Quill Travel Main unit approx weight: 27.00 lbs | Main unit dimensions (in inches): Length: 15.00"  Width: 4.00"  Height: 9.00" | Center height: 6" | Quill travel: 2.50" | Quill...

National 49.5 D Rotary Table

• Manufacturer: National

Opening (table bore): ~ 49.5 in (≈1,257 mm) | Static load rating: ~ 1,000 short tons (≈907 metric tons) for hydraulic versions; ~ 800 short tons for some electric drive versions. | Max torque: On similar size “R...

2015 Haas TR-310

• Manufacturer: Haas
• Model: TR310

Connectors and Cables A axis (tilt) max speed: 50 °/sec | A axis (tilt) max torque: 300 ft-lbf | A axis (tilt) gear ratio: 1000 ft-lbf | A axis (tilt) center height: 72:1 | B axis (rotary) # of heads / platens: ...

2014 Haas TR-160-2

• Manufacturer: Haas
• Model: TR160

(2) 160mm (6.3") T-Slotted Fixture Platters, Interface Cables, Connectors, Brushless Sigma 5 Servo Motors (2) 160mm (6.3") T-Slotted Fixture Platters, Interface Cables, Connectors, Brushless Sigma 5 Servo Motors

Delta Electronics DYNAPATH 4202879 F DELTA SERVO TRANSDUCER

• Manufacturer: Delta

2022 HAAS HRT-310 CNC Rotary Table & Tailstock 2022’ NEW USA #7660

• Manufacturer: Haas
• Model: HRT310

Imperial Metric HAAS HRT-310 CNC Rotary Table & Tailstock 2022’ NEW USA #7660 Reference #7660 Model # HRT-310 Serial # 320616 Version P20 Year of manufacture- 6/2022’ Platter diameter- 12.20” Max weight on platte...

C-275 Rotary Table 27 1/2″

New Surplus C-275 Rotary Tables, 450 Tons, Table Opening 27 1/2 Dimensions:

2007 Haas TR-160

• Manufacturer: Haas
• Model: TR160

Sigma 1 Brushless Drive Motors, Axis Drive Cables and Connectors, Air Line and Fitting 115 Volt, Single Phase

YUASA # UTRT-170 2 Axis CNC Rotary Table 4th & 5th #6023

• Manufacturer: Yuasa

YUASA # UTRT-170 2 Axis CNC Rotary Table OKUMA 4th & 5th # GMT-3148 Reference # 6023 SANYO DENKI Servo Motors (Yuasa Original) Stainless Sub Plate Brushless Servo Motors Pneumatic Brake

Rebuilt National 37″ 1/2C Rotary Table

• Manufacturer: NOV

Overall Dimensions: Table opening diameter: 37.5 inches (952.5 mm) | Static load capacity: 645 tons (5,850 kN) | Maximum torque: 23,870 ft·lbs (32,362 N·m) | Maximum rotational speed: 300 rpm | Gear ratio: 3.56 |...

2012 Haas TR210

• Manufacturer: Haas
• Model: TR210

5-Axis Trunnion Table -EQUIPPED WITH- Brushless Rotary Control

2008 Haas TR210

• Manufacturer: Haas
• Model: TR210

5-Axis Trunnion Table Platter diameter: 8.3" | Max weight on platter: 200 lb | Part swing max: 23.5" | Number of std t-slots: 6@ 60° | Tilt speed range: 0.001 to 60 °/sec | Tilt max rotation/step: 120 ° | Tilt re...

National Rotary Table 37 1/2

• Manufacturer: National

General Specifications: Dimensions and Weight: Additional Features:

KITAGAWA CNC 12" ROTARY TABLE

• Manufacturer: Kitagawa

This rotary table came off of a Doosan Mynx 5400/50 that appeared to have been used very little. A Chinese Company bought a line of valves from Cooper Valve. They started up in 2020, but due to Covid never got o...

National Oilwell National C-375 Rotary Table

• Manufacturer: NOV

National C-375 Rotary Table — Typical Specs Table opening diameter: 37-1/2 in (≈ 953 mm) | Static load capacity: 650 tons | Gear ratio: 3.60 | Oil reservoir capacity: 7 US gallons (≈ 26.5 L) | Overall length: 95-...