Used Saws in Belgium

Schüco notching saw

• Manufacturer: Schüco

for notching aluminium profiles - 2 saw blades (heads operate independently) - 2800 rpm - notching height: 155 mm - notching depth: 110 mm - notching width: 250 mm

ZM Hack saw

• Manufacturer: ZM

ZM Hack saw

Batens Vertical saw

• Manufacturer: Batens

Batens Vertical saw Table dimensions: 660 x 660 mm | Depth of throat: 920 mm | Table travel: Manual (1) -- hydraulic (2) | Welding set: yes

Elumatec table saw

• Manufacturer: Elumatec

Wide pivoting range of up to 0° to the right and up to 45° to the left (3D-sawing if you will) The special pivoting mechanism with integrated turntable enables working from the front at any angle position.

Schmaltz Vertical saw

• Manufacturer: Schmaltz

Depth of throat: 900 mm Table dimensions: 920 x 800 mm | Depth of throat: 900 mm

Rapid BSK circular saw

• Manufacturer: Rapid

Serie: 2070 Zaagbladdiameter: 500 mm Maximale snelheid: 2800 tpm Gewicht: 320 kg

Pedrazzoli LTC 3000 CNC circular saw

• Manufacturer: Pedrazzoli

This saw is equipped with a rotating sawblade for tubes up to diameter 32 mm. With this saw the cut tube is swarfless and has no burrs on the outside. Tube clamping is carried out by an easy interchangeable colle...

Spiro circular saw for ducts

• Manufacturer: Spiro circular saw

Buiszaag voor het zagen van buizen met een grote diameter (licht staal, pvc, kunststof...), vooral gebruikt voor het zagen van lange luchtkanalen - werkstuk wordt op de rollen geplaatst - de zaag wordt geactiveer...

KM BK-900N Band saw

Cutting machine for fabrics, mousse, light plastics Band saw type, but working with blade max. cutting height: approx. 230 mm. Knife length: 3860 mm. Attached table with dimensions 1.8 x 1.5 m. Distance between n...

1986 MAGH RAS 600 Joiners circular saw

• Manufacturer: Magh

Saw stroke: 600 mm Tiltable saw unit Angle-adjustable arm Customized table: 670 x 3000 mm Motor: 2.94 kW

1999 RAIMANN PS 600 Joiners circular saw

• Manufacturer: Raimann

Max cutting height: 160 mm Max cutting width: 550 mm engine 3,7 kW Max saw diameter: 550 mm

KIMAC Single-blade panel-sizing circular saw

Saw carriage 3m Saw blade inclinable: -45° / 90° Motor: 6kW Machine number: Year of construction:

Metal band saw JAESPA

• Manufacturer: Jaespa

Dimensions: Length: 1800mm; Width: 1300mm; Height: 1800mm 5kW, 220/380V, 3-phase, 50Hz With emergency stop

HULLHORST DH 50 Double panel-sizing circular saw

Double panel saw with manual width adjustment and manual cutting cycle Cutting depth 3.5m Cutting width 3.8m Cutting diameter 34cm Motor: 2x 3.7kW Machine number: Year of construction: