Used Processing in Wallonia, Belgium

Shake-out grid AXMANN 900 x 900 x 600 mm

• Manufacturer: Axmann

On 8 springs, 2 belt driven Outside dimensions: 1000 x 950, h. 600 mm | Useful dimensions: 900 x 900 mm | Motor: 2,2 KW, 3 hp, 1420 rpm, 220/380 V

Shake-out grid 900 x 900 mm

With vibrating axle, drive over 2 belts, on 8 springs

Discharging belt EA 4200 mm x 620 mm

Gearboxmotor BAUER Dismantled above with chain, heavy execution with 16 rolls 750mm

Core sand mixer BADIE 50 l

Type: KSU50, weight: ± 200 kg With cover Useful content 50 l Without protection at the sand outlet

Discharging belt EA 3000mm x 650mm

Gearmotor BAUER at the side with chain, with 10 rollls of 750mm

Bottom pouring ladle UTARD, ± 3 t

Serial number: A479 Weight: 2170kg Outside dimensions: 1900mm x 1200mm, h. 2450mm Useful dimensions: Ø 1000mm, h. 1200mm

Bottom pouring ladle UTARD, 2,5 - 3 t

Bad gearbox Weight: 1970 kg | Outside dimensions: 1900mm x 1000mm, h. 2350mm | Useful dimensions: Ø 950mm, h. 1220mm

Screw compressor 22 kW, BAUER, 3,55 m³/min

Type: C30 Super Silent, serial number.: 096-0532 Year of construction: 1996, weight: ± 450 kg Air output Ø 40mm Pressure max 7 bar 14.188 working hours

1990 Screw compressor MEHRER 1,43 m³/min

Type  FX11-10, serial number: 3252 Outside dimensions: 700 mm x 650 mm, h. 1200 mm Motor: 11 kW, 400 V, 2910 rpm Max pressure: 10 bar Year of construction: 1990

Screw dosing with a little bunker

Gearbox motor with speed regulation Type G22 G02- 10- VO/ DK 84- 200V 3308, 0,55 kW, 220/380 V, 1420 t/min With small pneumatic vibrating on the cone Screw not closed Speed exit 133 until 19 rpm Continuously

Sand blast unit, PAULUS, tank 150 l

• Manufacturer: Paulus

Max. 6 bar at 20°C Equipment on wheels Sand inlet manually clop in the tank With flexible house and steel pipe

Sand conveyor KLEIN 200 l

Outside dimensions: Ø 750 mm, inlet height: 1450 mm Cone closing 8 bar, content 200 L, 100°C Overhauled with a new switch cabinet

Screw conveyor HONERT, useful length 3200, Ø 250 mm

Type: R 250, Serial number: F14438/2 Year of construction: 1972, Weight: 300 kg In goods condition Suitable for 45° Ø 250 mm Length between entry and exit 3200 mm Drive between gear motor and screw over chain fo...

1997 Rubberbelt conveyor ±7300/300mm

Brand: LEREBOURS, type: TTE, serial number: 11497 Motor NORD, type SK90S/4, serial number C34212600/9510; 1,1 kW; 1410 rpm; 220/380 V; 4,75 / 2,75 A Ø outlet: 250 mm, Ø rolls: 150 mm Completely encased

Swing vibrating, 3000 mm x 280 mm x 130mm

Brand: LOCKER, type: LDD300/3000 Motor INVICTA, type B925/4, serial number 107733, 0, 5 kW; 1440 rpm, 415 V With two vitrating engines, 2 feet and lining