2" (51 MM) DIA. JONES & LAMSON THREAD & FORM GRINDER, USED BAR GRINDERS
- Manufacturer: Jones & Lamson
Inventory id: 10762600000 | Bar dia max: 2" DIAMETER | Model no.: 410 | Material ( steel grades,brass ,copper): STEEL | Bar dia min: 0.375 | Bar length: 7 | Spindle mtr hp: 0.75 | Spindle motor rpm: 3500 | Spind...
Pittsburgh, PAJones and Lamson 24S-25S Die Head #4 Morse shank
- Manufacturer: Jones & Lamson
“Good Condition” Jones and Lamson 24S-25S Die Head #4 Morse shank. See Pictures for full detail. Reference Stantec Inventory #0132 All products are as is. No warranties expressed or implied and I expressly discl...
$750 USDLenapah, OK
1953 Jones & Lamson 7A
- Manufacturer: Jones & Lamson
Manual Turret Lathe Swing over bed: 21" | Swing over cross slide: 13" | Max turning length: 37" | Spindle bore: 3" | Bar capacity: 2.5" | Spindle nose: A1-8 | Spindle speed: 1,500 RPM | Number of turret stations:...
Town of Rockingham, VT- Trusted Seller
7 A Used Jones & Lamson Saddle Type Turret Lathe
- Manufacturer: Jones & Lamson
7 A Used Jones & Lamson Saddle Type Turret Lathe Swing Over Bed Ways 20" Swing Over Cross Slide Carriage 15" Center Distance 40" Spindle Hole 3" Spindle Speeds 20 To 1,000 Rpm's Spindle Nose A-8 Chuck Size 12" 3 ...
Navasota, TX - Trusted Seller
10 A Used Jones & Lamson Saddle Type Turret Lathe
- Manufacturer: Jones & Lamson
Navasota, TX - Trusted Seller
Progres Jones & Lamson Senna 2
- Manufacturer: Jones & Lamson
Distance between the centers: 10.000 mm | Center height: 280 mm | Turning diameter above the bed: 560 mm ø | Turning diameter above the support: 300 mm ø | Rotational diameter in the bag: 900 mm ø | Through: 82 ...
Etten-Leur, Netherlands - Trusted Seller
Jones & Lamson 7"x8" Lathe - 6
- Manufacturer: Jones & Lamson
W/5" 3 Jaw Chuck, 1 1/2" Bore, 3 Hp, 1750 Rpm Name: Lathe | Arrival date: 09-09-2025 | Dimensions l x w x h (inches): 66 x 49 x 65 | Capacity: 7"x8" | Electrical: 3/60/230/460 | Weight (lb.): 1685 | Available qua...
$380 USDEuclid, OH 
LATHES JONES & LAMSON TNC 4515 CNC
- Manufacturer: Jones & Lamson
JONES & LAMSON TNC 4515 CNC CONTROL FANUC O T
Piedmont, Italy- Trusted Seller
JONES & LAMSON 7B #0779225
- Manufacturer: Jones & Lamson
Speeds: 12 | Rpm range: 20-1,000 | Equipped with: 3-JAW CHUCK
Toledo, OH
Tip: Enter manufacturer, model or keyword
