- Trusted Seller
JOHNFORD SL-500A CNC Machines
- Manufacturer: Johnford
- Model: SL500A
- Spindle bore: 52 mm
2006 Johnford SL 500 A Fanuc Oi-TC Control Flex-E-On HFX 1150 Hydraulic Collet Chuck Many Flex-E-On Jaw sets Original Spindle Clamp/Unclamp cylinder removed (For Flex-E-On collet chuck) RS – 232 port Coolant Tank...
Detroit, MI 
2013 JOHNFORD SL650CY
- Manufacturer: Johnford
- Model: SL650CY
Type of CNC Control Fanuc 0i-TD # Axis 4 Swing 22.8 inches Turning Diameter 16.5 inches Center Distance 60 inches Chuck Size 10 inches Bar Capacity 3 inches X Axis Travel 9.8 inches Z Axis Travel 55.1 inches C Ax...
2015 JOHNFORD ST40HX
- Manufacturer: Johnford
- Model: ST40
2- 32" SMW Big Bore chucks Rapid Traverse: X: 12; Z: 16 m/min Fanuc Series Oi-D Chip Conveyor Rear Chuck
- Trusted Seller
2013 23” X 60” JOHNFORD “SL650+C+Y” HEAVY-DUTY SLANT-BED CNC TURNING CENTER w/C-AXIS LIVE TOOLING & Y-AXIS
- Manufacturer: Johnford
- Model: SL650CY
SL-650+C+Y JOHNFORD HEAVY-DUTY SLANT-BED CNC Imperial Metric TURNING CENTER w/C-AXIS & Y-AXIS New 2013, Serial No TEQ130045, Model SL650+C+Y, EQUIPPED WITH: Fanuc Oi-TD CNC Control C-Axis w/Live Tooling Y-Axis Fu...
2018 JOHNFORD SL500A2S
- Manufacturer: Johnford
- Model: SL500A
- Spindle bore: 52 mm
Cross Travel (Y-Axis) +/-50mm (Turret) Cross Travel (X-Axis) +/-225mm (Turret) Longitudinal Travel (Z-Axis) 470 mm (Turret) Rapid Transverse X: 15m/min, Y:10m/min, Z: 18m/min (Turret) Fagor Chip Conveyor Tool P...
- Trusted Seller
Johnford SL 500A 2S+C+Y CNC Lathe
- Manufacturer: Johnford
- Model: SL500A
- Spindle bore: 52 mm
Johnford SL 500A 2S+C+Y CNC Lathe Swing over Bed: 580mm, Swing over Cross Slide: 370mm, Chuck Size: 12", Spindle Nose: A2-11, Spindle Bore: 115mm, Sub Spindle, 12-Station Live Tooling "C" Axis Spindle BMT-65, Y-...
Toledo, OH - Trusted Seller
2011 JOHNFORD SL-650
- Manufacturer: Johnford
- Model: SL-650
2011 Johnford SL-650 used CNC lathe with Fanuc 0i-TC control. Features include 22.8" swing, 60" machining length, 10" chuck, and 25 hp power with 3,500 RPM. Equipped with chip conveyor, coolant tank, and programm...
Ohio, USA - Trusted Seller
2002 JOHNFORD ST-130A
- Manufacturer: Johnford
- Model: ST130
Used CNC Lathe. Key specs: 36.2" swing, 130" machining length, 50 hp, 3000 RPM, 2-axis, 12" chuck, 4.1" bar capacity, 27.5" turning diameter, hydraulic programmable tailstock. Used condition. Swing over bed/Front...
Ohio, USA - Trusted Seller
2010 JOHNFORD SL-500A
- Manufacturer: Johnford
- Model: SL500A
- Spindle bore: 52 mm
Used CNC Lathe, used, 2-axis, with 22.8" swing, 28" machining length, and 35 hp power. Features include FANUC Oi-TD CNC Control, 12" chuck, parts catcher, conveyor, and chip conveyor. Wired for 220V/3 phase/60 Hz...
Ohio, USA - Trusted Seller
2013 JOHNFORD SL-650+C+Y
- Manufacturer: Johnford
2013 Johnford SL-650+C+Y CNC lathe in used condition features a 22.8" swing, 60" machining length, 3-axis operation, 10" chuck, and 25 hp power. Equipped with Fanuc Oi-TD control, live tooling, Y-axis, and hydrau...
Ohio, USA 
2005 JOHNFORD CNC LATHE
- Manufacturer: Johnford
Standard turning diameter 27.5", Swing over carriage 27.5", Maximum cross travel (X axis) 15.7", Maximum longitudinal travel (Z axis) 78.7", Distance between centers 88.5", Spindle: Spindle Motor 35 HP, Spindle n...
Bloomfield Hills, MI- Trusted Seller
2011 JOHNFORD SL-65
- Manufacturer: Johnford
- Model: SL65
2010 Johnford SL-650 CNC Lathe # Axis 2 Swing: 22.8" Turning Diameter: 16.5" Center Distance: 60" Chuck Size: 10" Bar Capacity: 3.0" X-Axis Travel: 11.4" Z-Axis Travel: 60" Spindle Nose: A2-8 Spindle Speed: 3,500...
Wixom, MI - Trusted Seller
2018 Johnford SL-500A
- Manufacturer: Johnford
- Model: SL500A
- Spindle bore: 52 mm
EQUIPPED WITH: Fagor 8060T Conversational Control Live Tooling- BMT65 Y-Axis C-Axis Hydraulic, Programmable Tailstock Body and Quill Air Blast Parts Catcher Parts Conveyor Bar Feeder Interface- Tracer 80V Bar Fee...
- Trusted Seller
2002 Johnford ST-130A 2 Axis CNC Slant Bed Lathe ()
- Manufacturer: Johnford
- Model: ST130B
Imperial Metric Johnford ST-130A 2 Axis CNC Slant Bed Lathe (2002) Swing over bed/Front cover 36.2" Standard turning diameter 27.5" Swing over carriage 27.5" Maximum cross travel (X axis) 15.7" Maximum longitudin...
Elk Grove Village, IL 
2010 JOHNFORD SL-650
- Manufacturer: Johnford
- Model: SL-650
Chuck size: 12", Fanuc Oi-td control, Swing: 22.8", Turning Dia: 16.5", Center: 60" Bar capacity: 3", X-travel: 11.4", Y-travel: 60", Spindle nose: A2-8, Spindle speed: 3500 rpm, Main motor: 25hp, Turret capacity...
Bloomfield Hills, MI
Johnford ST130 CNC Lathe
- Manufacturer: Johnford
- Model: ST130
Good condition Johnford ST130 CNC Lathes manufactured in 2003. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword