Used Processing in Lower Silesian, Poland

2004 Arburg 420C 1000-250

• Manufacturer: Arburg
• Model: 420 C 1000-250

Short circuit force [kn]: 1000 | Dimensions of mounting plates (hxv) [mm]: 570 x 570 | Clearance between columns (hxv) [mm]: 420 x 420 | Screw diameter [mm]: 40 | Injection volume [cm3]: 188 | Injection weight [...

2007 Krauss Maffei KM 800 – 12000 MX

• Manufacturer: Krauss-Maffei

Short circuit force [kn]: 8000 | Dimensions of mounting plates (hxv) [mm]: 1600 x 1530 | Clearance between columns (hxv) [mm]: 1120 x 1000 | Min./ max. mold height [mm]: 500 - 1100 | Maximum opening width [mm]: ...

2008 Krauss Maffei KM1100-12000 MX

• Manufacturer: Krauss-Maffei

Man hours: 86265 | Short circuit force [kn]: 11000 | Dimensions of mounting plates (hxv) [mm]: 2210 x 1910 | Clearance between columns (hxv) [mm]: 1550 x 1250 | Min./ max. mold height [mm]: 600 - 1200 | Maximum ...

2007 Krauss Maffei KM 950-17200 MX

• Manufacturer: Krauss-Maffei

Krauss Maffei KM 950-17200 MX Robot injection molding machine - LR 500 Year of manufacture - 2007 Fully hydraulic locking system. Industrial computer control system with integrated control panel with color touch ...

2001 Battenfeld TM4500/2800

• Manufacturer: Battenfeld

Short circuit force [kn]: 4500 | Dimensions of mounting plates (hxv) [mm]: 1155 x 1195 | Clearance between columns (hxv) [mm]: 800 x 800 | Min./ max. mold height [mm]: min 300/ max 770 | Maximum opening width [m...

2006 Krauss Maffei KM 300-1000 C2

• Manufacturer: Krauss-Maffei
• Model: KM 300-1000 C2

Short circuit force [kn]: 3000 | Dimensions of mounting plates (hxv) [mm]: 995 x 1050 | Clearance between columns (hxv) [mm]: 630 x 630 | Min./ max. mold height [mm]: minutes 330 | Maximum opening width [mm]: 11...

2000 Arburg 520C 2000-675

• Manufacturer: Arburg
• Model: 520C 2000-675

Short circuit force [kn]: 2000 | Dimensions of mounting plates (hxv) [mm]: 685 x 685 | Clearance between columns (hxv) [mm]: 520 x 520 | Screw diameter [mm]: 50 | Injection volume [cm3]: 353 | Injection weight [...

2011 Refine Glass RGT A 1530-Glass tempering furnace

According to the purchase invoice, the year of manufacture of the device is 2011, while the nameplate shows the year of manufacture as 2010. Manufacturer: SHANGHAI REFINE MACHINERY Model/Type: RGT A1530 Estimated...

2008 Krauss Maffei KM 160 - 750 CX

• Manufacturer: Krauss-Maffei
• Model: KM160-750CX

The machine has recently undergone the following work: Two heaters and a thermocouple were replaced, the pump seal was replaced, the hydraulic hose was replaced and the mounting was secured in the pump area, the ...

2025 Krauss Maffei KM 160 – 750 CX

• Manufacturer: Krauss-Maffei
• Model: KM160-750CX

Special anti-corrosion and anti-abrasion protection for the plasticizing unit, up to 25% glass fiber, plasticizing cylinder insulation, 2 x pneumatic valves (moving plate), 2 x pneumatic valves (fixed plate), 4-w...

2007 Krauss Maffei KM 250 – 1900 C1

• Manufacturer: Krauss-Maffei

Pressure tank Anti-vibration pads Additional information: 3 x core extractors 8 x hot runner control zones 2 x air valves Robot interface compliant with Euromap 67

2013 Haitian Mars II 7000/2950

• Manufacturer: Haitian

The equipment includes core drives: on the moving plate – 2 pieces, on the fixed plate – 2 pieces.

2001 Krauss Maffei KM 800-5000 MC

• Manufacturer: Krauss-Maffei
• Model: KM800-5000MC

The machine is additionally equipped with: - Robot - Conveyor - Feeder - Batteries We have two identical machines

2015 Engel VC 330/180 tech

• Manufacturer: Engel

ENGEL ecodrive SHV2: Servo-driven hydraulic system with low energy consumption and minimal noise. Quick mold change: Hydraulic quick mold closure, 4-point, 300 x 300 mm. Core extractors: 3 hydraulic circuits wi...

2015 Battenfeld TM 180/525

• Manufacturer: Battenfeld

Pneumatic valve - 3 pcs. Core - 1 pc. Man hours: 44753 | Short circuit force [kn]: 1800 | Dimensions of mounting plates (hxv) [mm]: 1020 x 1030 | Clearance between columns (hxv) [mm]: 520 x 520 | Min./ max. mold ...