Used Material Handling

BUNTING Drawer Magnet Used

• Manufacturer: Bunting

Inlet ID: 4 1/2 Outlet ID: 3 Flange: 6 x 6 Holes center-to-center: 4 1/2 x 4 1/2 Buyers are welcome to inspect equipment prior to purchase. Expedited shipping services are available upon request. This piece...

PPE TAL-15UFX Loader Used

• Manufacturer: PPE

1.1 kW 115 Volt Single Phase 60 Hz 3" Cylinder Height 6.75" Cone Height 7.75" Outside Diameter 6.5" Inside Diameter Tested Good Expedited shipping services are available upon request. All taxes due are ...

Generic Drawer Magnet USED

• Manufacturer: Generic

Inlet ID: 5 1/2 Outlet ID: 2 3/4 Flange: 7 x 7 Holes center-to-center: 6 x 6 Removed from: 750 Ton Engel Injection Molding Machine Model: ES 4400/750 Serial: 0454-750 Buyers are welcome to inspect equipme...

BUNTING Drawer Magnet Used

• Manufacturer: Bunting

TOP FLANGE: 7 1/2" X 7 1/2" TOP INLET HOLE DIAMETER: 4 1/4" BOTTOM FLANGE: 7 1/2" X 7 1/2" BOTTOM FLANGE INLET HOLE: 4 1/4" BOLT HOLES, CENTER TO CENTER: 6" Expedited shipping services are available upon req...

BUNTING Drawer Magnet Used

• Manufacturer: Bunting

TOP FLANGE: 7 1/2 X 7 1/2 TOP HOLE 4 1/4 BOTTOM FLANGE: 7 1/2 X 7 1/2 BOTTOM HOLE: 4 1/4 CENTER TO CENTER HOLE BOTTOM 6 INCH Expedited shipping services are available upon request. All taxes due are the res...

BUNTING 9063268-1-01 Drawer Magnet Used

• Manufacturer: Bunting

10" x 10" Top Flange 8" x 8" Holes Center to Center 4.25" x 4.25" Bottom Flange 3.25" x 3.25" Holes Center to Center 3" x 2" Top Opening 69 mm Outlet Inside Diameter Buyers are welcome to inspect equipment ...

BUNTING MAGNETICS Drawer Magnet USED

• Manufacturer: Bunting

7.5" x 7.5" Top Flange 4.25" Diameter Top Flange Inlet / Outlet Approx. 1.5" Cone Height 1.25" Cylinder 7.5" x 7.5" Bottom Flange 3 7/8" Diameter Bottom Inlet / Outlet Flange 6" x 6" Center to Center Holes ...

BUNTING Drawer Magnet Used

• Manufacturer: Bunting

Top flange:6 1/4x6 1/4 Top center to center:3 1/4x5 Inlet:2 3/4 Bottom flange:4 3/4x6 Bottom center to center:3 1/4x5 Outlet:2 3/4 Buyers are welcome to inspect equipment prior to purchase. Expedited shipp...

BUNTING MAGNETICS 62493-2 Drawer Magnet USED

• Manufacturer: Bunting

108.62 mm Diameter Inlet / Outlet Top Flange 6" x 6.5" Top Flange 5" x 5" Center to Center Holes Top Flange 7.75" x 7.75" Bottom Flange 6.75" x 6.75" Center to Center Holes Bottom Flange 1.5" Cone Height 1....

5,500 LB. O.S. WALKER BM-55 ELECTRIC LIFTING MAGNET; S/N 2634

• Manufacturer: Walker

5,500 LB. O.S. WALKER BM-55 ELECTRIC LIFTING MAGNET; S/N 2634

Lot of (2) Heavy-Duty Platform Trucks

This listing is for a Lot of (2) Heavy-Duty Platform Trucks Items are in good used cosmetic condition. Roll good. Platforms are 24 x 48 in Comes as shown in photos Non-R2 Item ***For assistance with shipping or s...

2008 StraPack RQ-8

• Manufacturer: StraPack
• Model: RQ-8

This listing is for a StraPack Automatic Strapping Machine Item is in good used cosmetic condition. Item has the following issues: No Controller Item is sold as is for parts or repair Additional Information: Mode...

CONAIR DL12 Vacuum Loader Receiver Used

• Manufacturer: Conair
• Model: DL12

DuraLoad Series 12" Receiver Diameter 0.5 Cu Ft Receiver Volume 1.5-2" Material/Vacuum Line Size Range 4" Cylinder Height 6.5" Cone Height 14" x 14" Flange 14" Outside Diameter 4.75" Outlet Inside Diamete...

Performance Health 597107 Ankle Brace X-Large White Clamshell

• Manufacturer: Hygenic/Performance Health

The Performance Health 597107 Ankle Brace is designed to provide superior support and stability for individuals suffering from ankle injuries or instability, making it an ideal solution for both clinical and home...

AEC WHITLOCK SRC02 Vacuum Hopper Used

• Manufacturer: AEC

Buyers are welcome to inspect equipment prior to purchase. Expedited shipping services are available. This piece is located at Ideal Machinery, Inc. on our showroom floor. Located at: 10230 N. Holly Rd, Holly ...