Used Construction

Venturo ET8KX

• Manufacturer: Venturo

Purchased new in 2014. Venturo, Model # ET8KX electric/hydraulic crane. 8,000 ft lb. capacity rating. 2,700 lbs. capacity @ 3' side reach - 575 lbs. @ full 14' extension. 6' to 10' power boom extension with 10' t...

2013 SDP 55M

• Manufacturer: SDP

RATED PLATFORM HEIGHT: 43' LBS. PER PLATFORM: 300 DESIGN VOLTAGE: 46KV QUALIFICATION VOLTAGE: 46KV INSULATING VOLTAGE: 46KV MAXIMUM HYDRAULIC SYSTEM PRESSURE: 2650 PSI CONTROL VOLTAGE SYSTEM: 12V DC 3-SECTION STE...

2025 Kylin KY380

• Manufacturer: Kylin

2025 KYLIN KY380 Ride On Loader Bkt, Eng: RATO EP4A Notes: Twin cylinder RATO Engine, 23HP ** Pick Up M-F 8-4:30PM** ***Pickup appointment MUST be made 48 Hours in advance. Pickups without an appointment will be ...

2 Construction Hard Hats

2 Bullard C30WHR Classic Hard Hat - Ratchet Suspension - White Never Used. Sold together.

2014 Trane 4TXCC043BC3HCBA

• Manufacturer: Trane

***HIGHEST BID IS SUBJECT TO WVSASP's APPROVAL*** Buyer MUST be 18 or older and MUST have a VALID U.S driver’s license to purchase or pickup anything from West Virginia State Agency for Surplus Property. All vehi...

1 Lot of Wire Mold and Supplies

***HIGHEST BID IS SUBJECT TO WVSASP's APPROVAL*** Buyer MUST be 18 or older and MUST have a VALID U.S driver’s license to purchase or pickup anything from West Virginia State Agency for Surplus Property. All vehi...

Adantex Anglgear Right Angle Bevel Gear Drive - R3500

• Manufacturer: Adantex

New, Open Box Name: Anglgear Right Angle Bevel Gear Drive | Arrival date: 10-10-2025 | Dimensions l x w x h (inches): 13 x 13 x 7 | Weight (lb.): 12 | Available quantity: 1

Gorbel Crane Arm

• Manufacturer: Gorbel

98" Name: Crane Arm | Arrival date: 10-03-2025 | Dimensions l x w x h (inches): 100 x 80 x 18 | Weight (lb.): 475 | Available quantity: 1

Barrett 3500 Lbs Die Lift - Rz-748

• Manufacturer: Barrett

Made In Usa Name: Die Lift | Arrival date: 08-26-2025 | Dimensions l x w x h (inches): 69 x 18 x 53 | Capacity: 3500 LBS | Weight (lb.): 310 | Available quantity: 1

Adantex Anglgear Right Angle Bevel Gear Drive - R3500

• Manufacturer: Adantex

New, Open Box Name: Anglgear Right Angle Bevel Gear Drive | Arrival date: 10-10-2025 | Dimensions l x w x h (inches): 13 x 13 x 13 | Weight (lb.): 14 | Available quantity: 1

Wesco 18" X 18"/500 Lbs Die Lift

• Manufacturer: Wesco

Name: Die Lift | Arrival date: 08-28-2025 | Dimensions l x w x h (inches): 24 x 19 x 31 | Capacity: 18" X 18"/500 LBS | Weight (lb.): 115 | Available quantity: 1

Andantex Anglgear Right Angle Bevel Gear Drive - R3500

• Manufacturer: Andantex

New, Factory Sealed Name: Anglgear Right Angle Bevel Gear Drive | Arrival date: 10-10-2025 | Dimensions l x w x h (inches): 13 x 13 x 13 | Weight (lb.): 14 | Available quantity: 1

Moldboard

Quanity Of 2 Name: Moldboard | Arrival date: 10-14-2025 | Dimensions l x w x h (inches): 22 x 80 x 12 | Weight (lb.): 1775 | Available quantity: 1

2022 KUNDEL 7.5CUYD

• Manufacturer: Kundel

7.5CUYD, Walk and Drag Bar, Tapered Back End, Dual Angle Back End, Reinforced Pick Zone, Wider Top, Formed Channel Reinforcement.

Engineered Air 40,000 CFM Air Handling Units – LM46C/C

• Manufacturer: Engineered Air

Overview These brand new, never installed Engineered Air LM46C/C Air Handling Units are designed for large-scale commercial and industrial HVAC applications requiring substantial air movement capacity. This lot ...