Used Slitters & Slitting Lines in Germany

1978 BOLLINA/ FASTI Slitting and length cutting/ feeding

• Manufacturer: Fasti

decoiler levelling/slitting and cut-to-length unit electrics

1995 MDS (SCHMITZ) Slitting and length cutting/ feeding

• Manufacturer: MDS
• Maximum thickness: 12 millimeter

No. of pinch rolls: 2 pinch roll Ø: 200 mm No. of levelling rolls: 3 levelling roll Ø: 160 mm

2003 HEGO/H. W. JÖRG AG Slitting and length cutting/ feeding

• Manufacturer: Jörg

decoiler foiling device leveller slitting shear cross-cut shear stacker electrics

1974 KAMPF RKW 406

• Manufacturer: Kampf
• Model: RKW 406

decoiler slitter (razor blade) rewinder electrics

1985 BURGHARDT & SCHMIDT M202 B/350

• Manufacturer: Schmidt

decoiler with hold-down arm and shifting base plate entry table slitting stand looping pit equipment strip brake recoiler with interchangeable mandrel and stripper plate electrics

1968 KAMPF RKW 300

• Manufacturer: Kampf

Working width: 1.050 mm | Strip thickness: 10 - 20 µ | Working width (slitting width): min. 100 mm | Material: aluminium foil | Internal ø decoiling: max. 120 mm | External ø decoiling: max. 600 mm | Internal (s...

1985 BURGHARDT & SCHMIDT M202 B/350

• Manufacturer: Schmidt

paper winder decoiler with hold-down arm and shifting base plate entry table slitting stand scrap winder looping pit equipment strip brake recoiler with interchangeable mandrel and stripper plate turnstile electr...

1990 PIEFER BVRM 500/7/90

• Manufacturer: PIEFER

strip centering 7 levelling rolls 2 pinch rolls ea. at entry/runout side without hydraulic equipment without electric equipment

Trimming device as an exchangeable cassette

• Maximum thickness: 2 millimeter

The trimming device is equipped with 2 sawing units and is used for trimming a rigid material web (e.g. laminate web, etc.). A special feature here is the design as an interchangeable cassette. Depending on the m...

Longitudinal cutter with tangential cut

With this cutting process a wide variety of materials (e.g. paper, foil, textiles, etc.) can be cut without any problems. By equipping it with a pneumatically operated lower knife shaft and individually adjustabl...

1980 COMEC Slitting

• Manufacturer: Comec
• Maximum thickness: 3 millimeter

blade shaft-Ø: 165 mm blade-Ø: 260 mm Strip width: max. 1.650 mm | Strip thickness: max. 3 mm | No. of strips: max. 20 | Speed: max. 150 m/min | Working direction: any | Blade shaft-ø: 165 mm | Blade-ø: 260 mm

1993 GUIDA/ FIMI Slitting

• Manufacturer: FIMI

coil car decoiler with shifting base plate and hold-down arm coil opener/pinch-roll unit/leveller crop shear with scrap switch pinch-roll unit strip centering pinch-roll unit slitting stand with tool changer carr...

1980 COMEC Slitting and length cutting/ feeding

• Manufacturer: Comec

No. of pinch rolls: 2 pinch roll Ø: 200 mm barrel length: 1.800 mm main drive: without

1991 DMF Slitting and length cutting/ feeding

• Manufacturer: DMF

telescopic table Strip width: 1.650 mm | Strip thickness: 0,4 - 3 mm | Working direction: right → left | No. of pinch rolls: 2

Evers SLITTING MACHINE DUO DISC 415-18

• Manufacturer: Evers

can also be used with a 9 m working width, frame with pendulum system, automatic V-position at the headland, fixed 3-point cat.3L/3 hitch, maintenance-free elements trailing at 25 cm, 72x Boller discs Ø 415 mm wi...