Used Sanders

Northtech NT-ES948DE Edge Sander

• Manufacturer: Northtech

Northtech offers a large family of industrial-grade edge sanders. The NT-ES948DE falls into the middle of the family of edge sanders with a 9″x48″ sanding area on both sides of the machine along with an end table...

Beach Stroke Sander Belt Drive 240V 3ph

• Manufacturer: Beach

Beach Stroke Sander Belt Drive 240V 3ph Wood shrouds have been removed and are not included Good condition, working when pulled from service when the video was taken All items are sold “AS IS” If you have que...

Stroke Sander 30″ x 80″

Return To: Sanders 30” (Front to back) x 80” length Front belt Horse Power: 5 Auxiliary Belt Horse Power: 5 Good Condition

Powermatic 35 12” Disk Sander

• Manufacturer: Powermatic

Return To: Sanders Tilt: 45” either way Volt: 115, Ph: 1, Hp: ¾” Equipped With : Control for Outside SN: 835171Good Condition

Laguna, SS|14 Spindle Sander

• Manufacturer: Laguna

Laguna’s SS|14 Spindle Sander is a versatile sander that comes standard with a stand, 4 inserts, and 6 spindles, including a 3” diameter bonus spindle. Features: Motor: 1/2 HP, 110 V, 7.5 amp RPM: 1,725 Oscil...

36" GRINDMASTER 2000 SANDER

• Manufacturer: Grindmaster

36" GRINDMASTER 2000 SANDER Model MSB 900 S/N TP1614-11 36” Max width Motorized table height adjustment Digital height read out Electric oscillation Contact roller 2 speed 1800/3600 Variator 4-12’ m/min (fed rate...

Laguna PS2 Profile Brush Sander

• Manufacturer: Laguna

The PS2 Profile sander is a 220 Volt Single Phase workhorse. Features include two brush sanding stations which can be used by two operators at the same time. The machine is a variable speed (RPM) brush sander, wh...

Laguna PS3 Profile Brush Sander

• Manufacturer: Laguna

The PS3 Profile sander is a 220 Volt Single Phase workhorse. Features include two brush sanding stations which can be used by two operators at the same time. The machine is a variable speed (RPM) brush sander, wh...

Laguna, 6|89T Edge Sander

• Manufacturer: Laguna

Laguna’s 6|89T Edge Sander is a horizontal/vertical sanding machine with swing function of the sanding belt. It features a 10” x 12” end table with dust shroud, a footprint of only 51” x 20” x 45”, and a belt spe...

Laguna PS1 Profile Brush Sander

• Manufacturer: Laguna

The PS1 Profile sander is a 220 Volt Single Phase workhorse. Features include two sanding stations which can be used independently or at the same time with two operators. One station is a sanding belt over a roll...

2000 Cemco Sander 2 Heads

• Manufacturer: Cemco

Cemco 2000 Headed Sander 1st head 30HP Rubber coated contact roll 2nd head 25HP Contact pad 37″ Width 75″ Belt length Pneumatic belt tensioning Electronic abrasive belt tracking Variable speed conveyor feed, 15 –...

Sanders in USA

• Manufacturer: Timesaver sanders

3 head Sander I have more Sanders in stock Should you need any further information, please do not hesitate to contact me.

Larick 6000 Series Brush Sander

• Manufacturer: Larick

The LARICK 6000 Series machine will brush sand and/or wire brush parts with standard widths of 25, 37 and 49 inches. It has 2 to 6 spindles which will accommodate sanding or wire brushes up to 14 inch diameter an...

BAILEIGH Belt Sander Tube & Pipe Notchers

• Manufacturer: Baileigh

This abrasive pipe notching machine requires different size mandrels for each different OD intended to notch. Mandrel changing is easy. Just take off the quick change side guard, loosen the belt tension hand whee...

Houfek Bulldog Sander

• Manufacturer: Houfek
• Model: Bulldog

Good condition Houfek Bulldog Sanders manufactured in 2006. Located in Canada and other countries. Click request price for more information.