- Trusted Seller
Seco Widebelt Sander
- Manufacturer: Seco
Seco Widebelt Sander 36" feed belt width Sanding unit with grooved rubber roller and platen Electronic bed raise/lower Idle infeed roller Control panel with load meters Dust manifold included but all other ductin...
Tualatin, OR - Trusted Seller
Delta "SA350" Spindle Sander
- Manufacturer: Delta
- Model: SA350
Delta "SA350" Spindle Sander Phase: 1 PHASE | Voltage: 110 VOLTS | Load fee: 0.00
Eugene, OR - Trusted Seller
1998 Ritter "R-901" Edge Sander
- Manufacturer: Ritter
Ritter "R-901" Edge Sander 6" x 49" platen Double sided Open end for contour sanding
Eugene, OR - Trusted Seller
Eugene, OR - Trusted Seller
Eugene, OR - Trusted Seller
2005 Butfering "SKO 213 RC" 2 Head Wide Belt Sander
- Manufacturer: Butfering
- Model: SKO 213 RC
Butfering "SKO 213 RC" 2 Head Wide Belt Sander 2nd head currently shows an error and would not run at time of pictures 1st.Head 30 HP Drum with steel contact roller. 2nd Head 25HP Combi with rubber roller & fini...
Eugene, OR - Trusted Seller
Eugene, OR 
Timesavers Model 3526HDTB Belt Sander
- Manufacturer: Timesavers
One Used Timesavers Model 3526HDTB 52” wide top and bottom 3+3 Belt Sander, S/N 10713. (New in 1980) Constant passline (38” height). This unit is ideal for sanding heavy panels. Bottom Head first: 1st Head 60 HP ...
Portland, OR
Timesavers Belt Sander 30" Wide Single Head Top Wide
- Manufacturer: Timesavers
Used Timesavers 30" Top Wide Belt Sander. 30 HP, 220/440V motor. Variable speed drive for 30"-wide feed belt. Dedusting brush on outfeed end. Air belt tracking. Amp meter for monitoring belt condition or st...
Portland, OR
Quickwood CD1-900 935mm (38.81") Single Head Brush Sander
- Manufacturer: QuickWood
Used Quickwood CD1-900 935mm (38.81") Single Head Brush Sander . Brush height 0-200mm (0" - 7.87"), brush speed 300 - 1,100 RPM . Rotating abrasive brush head, with 6.6 kW (9 HP) motor . 0.9 HP feed motor . ...
Portland, OR
Timesavers Sander Abrasive T&B Model 325-2HTBA 25" wide
- Manufacturer: Timesavers
Used Timesavers Model 325-2HTBA One Head Top and One Head Bottom Abrasive Sander. 300 Series 25" wide capacity 25"X75" abrasive belt length top head 75 HP 575 volts motor steel contact drum. Bottom head 50 HP m...
Portland, OR
Timesavers Sander Contour/Denibbing Model 337-6RP 36" wide
- Manufacturer: Timesavers
Used Timesavers Model 337-6RP Contour/Denibbing Sander, Serial No. 19506. Rotary polisher has six (6) 1/2 HP counter-rotating arbors with fladder-style abrasives; rotation 12-35 RPM, 2 HP variable feed 15-45 FPM...
Portland, OR
Timesavers Belt Sander Top Wide 36" wide 3-Head
- Manufacturer: Timesavers
Used Timesavers Model 337-3HD 3-Head Top Wide Belt Sander. A.For maximum 36" wide material B.Conveyor bed feed. Feeds from right to left from operator's side. C.Opens to 6" D.First contact drum is 11-1/2" dia. ...
Portland, OR
CANTEK Model C371 36" Wide Single Head Wide Belt Sander
- Manufacturer: Cantek
Used CANTEK Model C371 36” Wide Single Head Wide Belt Sander; combination head with 5” diameter rubber contact drum and 2” wide platen, 37” x 60” abrasive belt size. 20 HP motor wired 230 volts 3 phase, 2 HP vari...
Portland, OR
Haney Pro-Sand Finale 37" Wide Oribital Sander and Brush Machine for panels
One Used Haney Pro-Sand Finale 37" Wide Oribital Sander and Brush Machine for panels. Two Orbital heads and one brush. Up to 40 FPM cross grain and scratch removal. Up to 60 FPM sealer sanding. Built in USA w...
Portland, OR
Tip: Enter manufacturer, model or keyword