1990 HELMERDING ERH 75 B
- Manufacturer: HELMERDING
Furnishing: - with hydraulic clutch-brake combination, with new hydraulics and oil cooler - with gear train in an oil bath - Fixed table prepared for hanging tool changing consoles - 2 roller strips in the table ...
Schmölln, Germany
1992 TOX-Pressotechnik PC 30.56
- Manufacturer: TOX Pressotechnik
- Stroke length: 200 millimeter
- Throat depth: 250 millimeter
Power pack press - The presses are equipped with a pneumohydraulic power cylinder. equipped. This divides the total stroke into an air-driven, and a hydraulic power stroke that starts automatically when the press...
Schmölln, Germany
1977 DUNKES ESPZ 63/28
- Manufacturer: Dunkes
- Model: ESPZ 6328
- Draw cushion Press not safe for manual insertion work
Schmölln, Germany
1990 HYDRAP HPSK-100 CNC
- Manufacturer: ambold
- Power requirement: 22 kilowatt
- Ejector in the table, pressure force 40 t, stroke 100 mm - laterally movable work area guarding with BWS (light barrier) this with cycle operation - Cooling, behind the machine, accumulation water tank (beige) ...
Schmölln, Germany
AMBOLD PEEV 25.4
- Manufacturer: ambold pressen- und maschinenbau
- Ortlinghaus hydraulic clutch-brake combination - Central lubrication bird - Balluff cam switch - Height adjustable table - Control cabinet with touchscreen - foot switch
Schmölln, Germany
AMBOLD PEEV 40.3
- Manufacturer: ambold pressen- und maschinenbau
- Power requirement: 3.5 kilowatt
- Ortlinghaus pneumatic clutch / brake combination - Central lubrication bird - Balluff cam switch - Height adjustable table - Control cabinet with touchscreen - foot switch
Schmölln, Germany
2025 IWK PEKRD 125
- Manufacturer: ambold pressen- und maschinenbau
- Stroke length: 400 millimeter
- Power requirement: 16 kilowatt
– The machine has been partially overhauled – It has been completely disassembled and technically inspected – New seals – New pneumatic coupling – New seals in the compensating cylinder – New drive motor – New ba...
Schmölln, Germany
1988 HELMERDING ERH 100 B
- Manufacturer: HELMERDING
Equipment: - Final drive - shaft with 3 bearings - Semi-automatic stroke adjustment - circulating oil lubrication - Hydraulic clutch - Separate hydraulics with oil cooler The machine is partially overhauled by us...
Schmölln, Germany
1958 RICHTER PED 160
- Manufacturer: ambold pressen- und maschinenbau
2003 Modernization / Retrofitting The following work is still to be carried out on the machine: - new control cabinet with ABB SPS - separate two-hand control input with foot switch - Vogel loss lubrication
Schmölln, Germany
2013 CHIN FONG G2-160 V
- Manufacturer: CHIN FONG
- Power requirement: 11 kilowatt
- safe for manual insertion - Conversion to west - Light barrier
Schmölln, Germany
1990 dirinler CD/PC 800 HK
- Manufacturer: Dirinler
- Power requirement: 5.5 kilowatt
- Ram weight compensation Machine to be partially overhauled in our company in the coming year (disassembly, inspection, new paintwork, new wiring, new control cabinet)
Schmölln, Germany
1997 ZEULENRODA PED 100/3
- Manufacturer: Zeulenroda
- Model: PED 1003
- Increased installation height - with draw cushion - converted to safe control (Pilz PLC), safe for manual insertion work on the open mold
Schmölln, Germany
1984 HYLATECHNIK HESSP 100 1.5 XA4
- Manufacturer: Hylatechnik
- Fine stroke adjustment - Cutting shock damping - Oil extraction - 2 cylinders - Roll feed from Dreher, type WAV, control PMS3000 from Dreher - Soundproof booth - Machine was overhauled in 2001 and equipped with...
Schmölln, Germany
1980 EDELHOFF HZP 100
- Manufacturer: EDELHOFF
- Power requirement: 11 kilowatt
with shock absorption and die cushion Machine without control cabinet
Schmölln, Germany
KEPROMA AG DOD 40/100
- Manufacturer: ambold pressen- und maschinenbau
- Demonstration model with branded overhauled control system - NC roll feed servo power with direct drive - plasma nitrided rolls - backlash free drive - strip side guide Performance data at 180 degrees - 1000 st...
Schmölln, Germany
Tip: Enter manufacturer, model or keyword