Used Processing in New Jersey, USA

Pump-Vacuum - IPP# 208379

• Manufacturer: Wiegand

Steam injection 4 effects with ceramic pistons and VICARB Carbon Block Heat Exchanger, Serial Number 1296, rated -1/3 bar @ 150 degrees C Service Side, volume 16 liter; -1/3 bar @ 150 degrees C process side, volu...

Stainless Steel Austenitic Chema Balke Dürr GmbH Batch-Type Agitated Reactor - IPP# 235800

• Manufacturer: Dürr

1.4529 SS (AL-6XN super-Austenitic SS) fermenter/ reactor with internal cooling coil and sparge ring for gas addition Polished stainless steel interior motor : 3/50/380 volt Bergmann double mechanical seal on sha...

Low Temp Chiller 771,107 kcal/h (255 Ref. Ton) - IPP# 216002

• Manufacturer: Trane

CentraVac Low temperture, Series R chiller Drive motor: 197 kW, rated for 460 volt, 3 ph, 60 Hz Requires 705 lbs Evaporator rated for 40% Glycol at 428 gpm, inlet at 33.8 degrees F, and outlet at 25 degrees F. Co...

Batch-Type Agitated Reactor 34,069 L (9,000 gallons) Stainless Steel 316 - IPP# 246699

• Manufacturer: Industrial Alloy Fabricators

There are no man way covers for this vessel. Instead, this process required a ring and a single use rupture disk.

Batch-Type Agitated Reactor 34,069 L (9,000 gallons) Stainless Steel 316 - IPP# 246701

• Manufacturer: Industrial Alloy Fabricators

There are no man way covers for this vessel. Instead, this process required a ring and a single use rupture disk.

Stainless Steel 316 Centrifuge-Lab - IPP# 239309

Centritec Cell 8 single use insert centrifuge This type of flow centrifuge is for harvesting mammalian and insect cells in a single use insert. The system offers these advantages Single use, rapid changeover disp...

Stainless Steel 304 Centrifuge-Disc Bowl - IPP# 238437

• Manufacturer: GEA

continuous disc bowl centrifuge Rated 1 bar @ 50 deg C Sanitary construction for food processing Max feed temp 95 deg C Solids density: 1.42 kg/dm3, Heavy liquid density: 1.20 kg/dm3.Max feed temp 95 deg C. Motor...

Packed Column - IPP# 222790

• Manufacturer: Mechanica Sarda

300 kg/Hr, recovered VCM stripping system, designed to stripping unreacted VCM from PVC slurry process reducing vent gas to less than 1 ppm VCM. This system is EVC Technology, and can be used to strip volatiles f...

Packed Column - IPP# 222789

• Manufacturer: Mechanica Sarda

300 kg/Hr, recovered VCM stripping system, designed to stripping unreacted VCM from PVC slurry process reducing vent gas to less than 1 ppm VCM. This system is EVC Technology, and can be used to strip volatiles f...

Low Temp Chiller 771,107 kcal/h (255 Ref. Ton) - IPP# 216001

• Manufacturer: Trane

CentraVac Low temperture Series R chiller Requires 705 lbs. inlet at 33.8 degrees F, and outlet at 25 degrees F. (4 pass) Condenser NB # 4401, serial # 44010, built in 1996, rated for 300 psi at 300 degrees F.( 2...

Major Items Plastic Stainless Steel 316 - IPP# 205767

• Manufacturer: Rieter (Maag)

Type: Underwater strand pelletizer the vertical design provides space savings and easy access to the cutter head Designed to Process the following PET: Melt density 1.18 g/cm3, Solid density 1.34 g/cm3. Melt temp...

Stainless Steel 317 Andritz SZ400/2 Centrifuge-Pusher - IPP# 232767

• Manufacturer: Andritz

Duplex/317/316 stainless steel two stage pusher continuous centrifugeTwo stage pusher continuous centrifuge 5.5 ton/hour troughput of solids 10/130 degrees C cake thickness of outer basket 40mm (max) inner basket...

Pump-Vacuum 779.8 m3/h (459 CFM) Carbon Steel - IPP# 221215

• Manufacturer: Kinney/Tuthill

screw type dry seal vacuum pump 0.05 ultimate pressure No oil or water with process contact and quiet operation less than 85 dB(A) Requires 2.6 gpm cooling water Direct driven by ac motor`

Pump-Vacuum 779.8 m3/h (459 CFM) Carbon Steel - IPP# 221214

• Manufacturer: Kinney/Tuthill

screw type dry seal vacuum pump 0.05 ultimate pressure No oil or water with process contact and quiet operation less than 85 dB(A) Requires 2.6 gpm cooling water Direct driven by ac motor

Hastelloy - C22 Heinkel HF800 Centrifuge-Inverting Filter - IPP# 225440

• Manufacturer: Heinkel

new bearings, seals, belts, rebuilt hydraulic unit, and run in by the OEM 1600 RPM Maximum Solid Haynes Hastelloy C 22 for all process parts, 316SS for balance of exterior parts Clean in place nozzles for solids ...