Used Post Press in Brandenburg, Germany

2008 Muero 5000 A4 WT

• Manufacturer: Müro

mobile base Hot air blower drying Heat sheet for uniform drying and press insert for smaller stacks Holding capacity for A 4 stacks Gluing of form sets or brochures DIN A 5 Stacking height: 50 cm Press width: 35 ...

2010 AKM PSA 60

• Manufacturer: AKM

mobile prefold delivery flat pile delivery AKM PSA 60 Pharma with press from yr. 2010 Product format min. 90 x 60 x 0.5mm Product format max. 300×600 x 8.0mm Speed 32-180m/min. 2 pairs of press rolls Pressing pre...

2002 Ernst Nagel Morgana NUMNAK-S / FSN

• Manufacturer: Morgana
• Model: FSN

- ideal for numbering glued SD sets - complete with feeder suction and blowing air in basic equipment - 1 Paint roller - 1 piece numbering shaft - 2 pieces seat rings - 2 rotary numbering units With its suction f...

JBI James Burn International K 50 electric Wire-O punching machine

• Manufacturer: James Burn - JBI

JBI James Burn International K 50 electric Wire-O punching machine max. punching width 500mm

2004 Busch SWH 180 Le

• Manufacturer: Busch
• Model: SWH 180

VLF sized 7-format (KBA Rapida 162 and Roland 900 XL) Pile turner Busch SWH 180 Le year 2004 - with pressure relief flaps - with 4 strong adjustable air nozzles - tub 1220×1620 mm - opening width 1600 mm The unit...

2011 H&H Herzog & Heymann, MBO F 76 Solo, H&H 381

• Manufacturer: Herzog+Heymann

Flat pile feeder MBO F 76 Solo with independent drive for max. format of 72 x 102 cm. built 2011 from MBO are designed specifically for use in workplace environments that have frequently changing finishing requi-...

Punching tool Renz DTP 340 6mm pitch 2to1

• Manufacturer: Renz
• Model: DTP 340

2001 GBC AP-2 Ultra

• Manufacturer: GBC
• Model: AP2

with a tool rectangle 8,3x3mm for plastic binding

2012 Uchida / ATS Tanner ATS-MS 420 S

• Manufacturer: ATS
• Model: MS 420

The device is suitable for sensitive products up to A3 format, is immediately ready for operation and requires no heating time. Short front table for small formats Heat seal unit for paper and film tapes Micropro...

JBI James Burn International K 50 manual Wire-O closing machine

• Manufacturer: James Burn - JBI

JBI James Burn International K 50 manual Wire-O closing machine max. binding width 500mm

Wire O ring binder punching tool for electric punching machine Renz DTP 340 and DTP 340 M

• Manufacturer: Renz
• Model: DTP 340

Wire O ring binder punching tool for electric punching machine Renz DTP 340 and DTP 340 M in pitch 2-1 with 6mm round hole

Baumann Wohlenberg BSB 3 L

• Manufacturer: Wohlenberg

Wohlenberg Baumann BSB 3L automatic jogger SN 212.281 Equipment: with air ejection roller, pneumatic flap left and right with air, Compressed air to be provided by customer !

Renz WBS 340

• Manufacturer: Renz
• Model: WBS 340

Renz WBS manual closing machine for wire comb binding The Renz WBS 340 with module holder can be connected to the DTP 340 M tabletop punching machine. be hooked into an efficient and space-saving punching and bin...

Chr. Renz Heubach DTP 340

• Manufacturer: Renz
• Model: DTP 340

for calendar punching with one punching tool pitch 3:1, round hole 4 mm Powerful punching system for punching and perforating paper up to 340 mm working width With foot switch and vertical paper feed Punching cap...

2004 Baumann BSW 3-1000 AUM AUPASYS

• Manufacturer: Baumann
• Model: BSW-3-1000

The AUPASYS format 3b pile turner has been specially designed to meet the requirements for using system pallets with automatic non-stop in the feeder and delivery. -manual system for loading and operation from th...