- Trusted Seller
A. Tacke nicht bekannt
- Manufacturer: A. Tacke
- Throat depth: 260 millimeter
- Drilling diameter: 30 millimeter
This machine has 2 tables. Drilling table LxW: 370 x 500 mm Attachment table: LxW: 420 x 750 mm Clamping surface = 320 x 600 mm, transverse displacement (X-axis) 250 mm possible Ejection of tool via ejector wedge...
Leipzig, Germany - Trusted Seller
1976 BULMAK PK 031
- Manufacturer: BULMAK
- Throat depth: 320 millimeter
- Drilling diameter: 32 millimeter
Spindle right/left rotation Work table can be rotated and tilted left/right Coolant tank/coolant device Machine illumination
Leipzig, Germany - Trusted Seller
FLOTT TB 10-I
- Manufacturer: Flott
- Model: TB 10-I
- Throat depth: 190 millimeter
- Drilling diameter: 16 millimeter
Drill sleeve equipped with drill chuck 1 - 16 mm table rotatable
Leipzig, Germany - Trusted Seller
2000 ALZMETALL AX2-T/S
- Manufacturer: Alzmetall
- Model: AX2
- Throat depth: 250 millimeter
- Drilling diameter: 18 millimeter
High-performance drilling machine Thread cutting in steel possible up to M 10 and cast iron up to M 14 equipped with Röhm 3 -16 mm quick-action chuck Operation via control panel / foot switch
Leipzig, Germany - Trusted Seller
PAGUS Tailstock
- Manufacturer: Pagus
Tailstock PAGUS Tool holder: Outer diameter: Ø 78 mm, co-rotating Tool holder: inside diameter: Ø 58 / 53 mm, length: 105 mm, conical Ejector screw with handwheel Guide bush: Inner diameter: Ø 30 mm, length: 125 ...
$324 USDZschepplin, Germany - Trusted Seller
PAGUS tailstock with collet set
- Manufacturer: Pagus
Tailstock, 2 pieces, with collet set PAGUS for T-slot 8 / 10 mm 13 pairs of collets: Ø 1.0 mm - 7.0 mm, increasing by 0.5 mm in wooden box used, tested !
$915 USDZschepplin, Germany - Trusted Seller
PAGUS Tailstock
- Manufacturer: Pagus
Tailstock with quill and fixed center punch PAGUS with fixing screw used, tested !
$209 USDZschepplin, Germany - Trusted Seller
PAGUS Tailstock
- Manufacturer: Pagus
Tailstock, without quill PAGUS used, tested ! Tip height: 260 mm | Quill: approx. 200 mm | Quill diameter: Ø 80 mm | Foot: 320 x 235 mm | Backing plate 1: 175 x 68 mm, with screw | Backing plate 2: 183 x 12 mm, w...
$521 USDZschepplin, Germany - Trusted Seller
1957 WMW CM10
- Manufacturer: WMW
- Throat depth: 220 millimeter
- Drilling diameter: 20 millimeter
The machine is currently in the technical department. Table rotatable 380 V with connection cable 2500mm
Leipzig, Germany - Trusted Seller
PAGUS machine vice
- Manufacturer: Pagus
Machine vice PAGUS on table with graduation 360° rotatable 90° tiltable used, tested !
$336 USDZschepplin, Germany - Trusted Seller
WMW SAALFELD BK 40
- Manufacturer: WMW
- Model: BK 40
- Throat depth: 360 millimeter
- Drilling diameter: 40 millimeter
for thread cutting clockwise and counter clockwise operation
Leipzig, Germany - Trusted Seller
2008 HUVEMA MG40M
- Manufacturer: Huvema
- Throat depth: 350 millimeter
- Drilling diameter: 40 millimeter
Height-adjustable table Table can be swiveled 45° left/right and rotated 360° around the column Thread cutting up to M24 Coolant system
Leipzig, Germany - Trusted Seller
WEYRAUCH RB-R-1Z50
- Manufacturer: WEYRAUCH
Radial drilling machine, drilling machine, pillar drilling machine, column drilling machine used 380 V Changes and errors in the technical data, specifications and prices and subject to prior sale.
Riesa, Germany - Trusted Seller
KNDR BI-32GA
- Manufacturer: KNDR
Column drilling machine, pillar drilling machine used 1,5 kW 380 V Changes and errors in the technical data, specifications and prices and subject to prior sale.
Riesa, Germany - Trusted Seller
ALZMETALL AB4SV
- Manufacturer: Alzmetall
- Model: AB 4 SV
- Throat depth: 345 millimeter
- Drilling diameter: 28 millimeter
Thread cutting with right and left rotation via foot switch Table adjustment via hand crank Without coolant tank Machine vice Quick-action clamping chuck Röhm Supra 3 - 16mm i.D.
Leipzig, Germany
Tip: Enter manufacturer, model or keyword