Used Milling Machines in Saxony, Germany

Trusted Seller
WMW cutter arbor
- Manufacturer: WMW
Cutter arbor, tool holder, with tightening thread WMW, VWF 40 x 22 x 315 ( 40x22x315 ) SK40 used !
$174 USD
Zschepplin, Germany
Trusted Seller
WMW cutter arbor
- Manufacturer: WMW
Cutter arbor, tool holder, with tightening thread WMW 3 x 25 x 160 ( 3x25x160 ) TGL 30-4113 MK3 New !
$197 USD
Zschepplin, Germany
Trusted Seller
tiene eje con etiqueta
- Manufacturer: WMW
Cutter arbor, tool holder, with tightening thread WMW, VWF 40 x 40 x 315 ( 40x40x315 ) SK40 used, tested !
$290 USD
Zschepplin, Germany
Trusted Seller
SECO cutter arbor
- Manufacturer: Seco
Cutter arbor, tool holder SECO, EPB E9306557104012 Tool holder: Ø 40 mm, length: 40 mm, wedge width: 10 mm New !
$209 USD
Zschepplin, Germany
Trusted Seller
1995 WAGNER UF1
- Manufacturer: Wagner
- Power requirement: 4.6 kilowatt
The milling beam is slide adjustable with 580mm. Throat min. / max. 250/800mm
Leipzig, Germany
Trusted Seller
1980 WMW "FRITZ HECKERT" FU 315 V/2
- Manufacturer: Heckert
Horizontal beam adjustment manual 650 mm mounted on table: clamping head with 3-jaw chuck Ø 200 mm with inner jaws, center height 165 mm Coolant system Hand crank Milling arbor Ø 22 x 620 mm with form cutter 80 x...
Leipzig, Germany
Trusted Seller
PAGUS clamping table
- Manufacturer: Pagus
Clamping table, tilting table, milling table PAGUS used, tested !
$684 USD
Zschepplin, Germany
Trusted Seller
1976 WEYRAUCH F10-V
- Manufacturer: WEYRAUCH
- Power requirement: 1.17 kilowatt
Machine table feed 15 - 230 mm/min. via 12 steps Equipment: Sauter workpiece holder with 2 stations (Ø 125 mm and Ø 32 x 26 mm journals), hydraulic operation Coolant system Control panel; hand crank
Leipzig, Germany
Trusted Seller
WMW impact cutter
- Manufacturer: WMW
Impact tooth cutter, Flycutter WMW SK 50 x 192 mm Tool side: Diameter 1: Ø 100 mm, length: 135 mm tool side: diameter 2: Ø 80 mm, length: 55 mm used, tested !
$209 USD
Zschepplin, Germany
Trusted Seller
1975 MAHO MH 500
- Manufacturer: Maho
- Model: MH 500
- Power requirement: 1.6 kilowatt
Spindle vertical tool holder SK 40 Quill stroke 60 mm Speed 40 - 2000 rpm with 18 transmission steps Spindle horizontal Tool holder SK 40 Speed 40 - 2000 rpm with 18 transmission steps Equipment: 3-way display He...
Leipzig, Germany
Trusted Seller
1970 STANKOIMPORT 6M82
- Manufacturer: Stankoimport
Coolant system 2x counter bearing arbor holder Ø 18 / Ø 60 mm and other accessories in the tool cabinet. i.D.
Leipzig, Germany
Trusted Seller
WMW FW 400 V
- Manufacturer: WMW
- Model: FW 400
- Power requirement: 14.5 kilowatt
Type of control: conventional | Freight basis: ex location Bitterfeld, free on truck | Storage location: GOG Bitterfeld | X-travel: 1000 mm | Y-travel: 350 mm | Z-travel: 400 mm | Distance between column - table...
Leipzig, Germany
Trusted Seller
KONDIA FV-1
- Manufacturer: Kondia
- Model: FV1
This machine is currently in the technical department.
Leipzig, Germany
Trusted Seller
1975 MAHO MH 500
- Manufacturer: Maho
- Model: MH 500
- Power requirement: 1.5 kilowatt
Spindle vertical tool holder SK 40 Quill stroke 60 mm Speed 40 - 2000 rpm with 18 transmission steps Spindle horizontal Tool holder SK 40 Speed 40 - 2000 rpm with 18 transmission steps Equipment: 3-way display He...
Leipzig, Germany
Trusted Seller
1998 VREMAC FU 251
- Manufacturer: VREMAC
- Power requirement: 10 kilowatt
Ausstattung: 2x Gegenlager Ø 55mm Kühleinrichtung: Pumpe und Zuführung Bedienung über 3-Wege Messsystem ACU-Ride und Bedientafel Maschinenfüße
Leipzig, Germany