Used Lathes in Saxony, Germany

ROTO RECORD face plate

• Manufacturer: Pagus

Face plate ROTO RECORD PL 315x5 ( PL315x5 ) TGL 30-22313 mounting flange: Ø 79 / 81 mm, depth: 13 mm ( conical ) with one-piece reversible jaws used, tested !

PAGUS face plate

• Manufacturer: Pagus

Faceplate PAGUS Grooves. 14 / 24 mm Outside ø: 295 mm | Hole circle ø: 104 mm | Bore ø: 60 mm | N max: 600 U/min | Dimensions: 295 x 295 x 40 mm

PAGUS face plate

• Manufacturer: Pagus

Faceplate PAGUS Hole M8 / M12 and 4 x Ø 12 mm Outside ø: 360 mm | Center hole ø: 20 mm with thread | Flange: Ø 250 mm | Hole circle inside: Ø 135 mm | Outer bolt circle: Ø 225 mm | Thickness with flange: 55 mm | ...

ROTO RECORD face plate

• Manufacturer: Pagus

Face plate ROTO RECORD PL 315x6 TGL 30-22313 New ! preserved !

WMW 3-jaw combi feed

• Manufacturer: WMW

3-jaw combination chuck, three-jaw chuck with individually and centrally adjustable jaws WMW, ROTO RECORD used, tested !

PAGUS face plate

• Manufacturer: Pagus

Faceplate PAGUS short cone used, tested ! External ø: 400 mm | Hole circle: 135 mm | Drilling ø: 100 mm | Height with jaws: 140 mm | Flange: 175 mm | Total height: 190 mm | Dimensions: 400 x 400 x 200 mm

ROTO RECORD face plate

• Manufacturer: ROTO RECORD

Face plate ROTO RECORD PLV 500x8 TGL 30-22313 Outside ø: 500 mm | Sin nombre en la placa: 170 mm | Bore ø: 135 mm | N max: 560 U/min | Dimensions: 500 x 500 x 165 mm

WMW 4-jaw combi feed

• Manufacturer: WMW

4-jaw combination chuck, four-jaw chuck with individually and centrally adjustable jaws WMW, ROTO RECORD (without screws) used, tested !

PAGUS face plate

• Manufacturer: Pagus

Faceplate PAGUS preserved ! Outside ø: 630 mm | Hole circle ø: 170 mm | Bore ø: 135 mm | Dimensions: 630 x 630 x 185 mm

WMW face plate

• Manufacturer: WMW

Faceplate WMW ROTO RECORD Ø 500 mm 8x Slotted Holes: Ø 19.5 mm, Length: 90 mm 4x Slotted Holes: Ø 19.5 mm, Length: 100 mm with one-piece reversing jaws Machine side: Mounting ring: Diameter: Ø 217 / 191 mm, Width...

RÖHM power chucks, pneumatically operated

• Manufacturer: Röhm

Power chucks, 3-jaw chucks, three-jaw chucks, wedge hook chucks pneumatically operated RÖHM DURO-NC 160 Through-hole: Ø 39 mm, depth: 15 mm pneumatic clamping device: Ø 275 mm, height: 115 mm spare part e.g. for ...

SMW® AUTOBLOK repair kit for shaft chucks

• Manufacturer: SMW® AUTOBLOK

Repair kit for shaft chucks SMW® AUTOBLOK W215-3-C Spring assembly W-215 201214 1x Locking screw set AM022x1.5 - W-215 068639 New !

PRATT BURNERD 6-bake chuck

6-jaw chuck, six-jaw chuck PRATT BURNERD 3260 03205 3x stud bolts: M16 x 2.0, length: 38 mm used, tested ! Dimensions: 310 x 310 x 225 mm

PAGUS face plate

• Manufacturer: Pagus

Faceplate PAGUS / WMW 4x threaded hole: M12 x 1.75, depth: 25 mm 1x hole: Ø 19 mm, depth: 8 mm cone: Ø 103 / 106 mm, depth: 15 mm used, tested !

PAGUS face plate

• Manufacturer: Pagus

Face plate, clamping plate PAGUS 4x threaded hole: M16 x 2.0, depth: 30 mm used, tested !