Used Fish Processing in England, United Kingdom

MAREL SLICER

• Manufacturer: Marel

1 x Marel Carnitech IPS3000 MK2 Slicer Year: 2010 Located in London, UK

Baader Header 417

• Manufacturer: Baader

Baader 417 Heading machine V cut White fish up to 70cm long Up to 40 fish per minute with skilled operator

Baader Skinner

• Manufacturer: Baader

Baader 51 Skinning Machine for white fish This machine is capable of skinning fillets of any size cut from white fish and redfish using a reliable pulling system. No initial cut at the tail end, meat saving skinn...

GEA Grasso Compressor RC4210

• Manufacturer: Grasso

RC4210 Grasso Refrigeration Compressor running on Freon R404. Could be change to run on a different gas. Ammonia or freon. Year 2003 Last used on a Torry Tunnel Freezer for IQF fish fillets Two Stage compressor 6...

2023 Baader IS609 Descaling machine

• Manufacturer: Baader

Baader IS069 Descaling machine, Serial: 5306907, 2023, Stainless de-scaler, variable speed, up to 100 fish per min, 0.4 - 3Kg, 3.0Kw, overall length 1850mm, mobile, 3Ph

JenActUV UVTCONV500 UV Torpedo conveyor

Stainless, variable speed conveyor with UV disinfection zone, the UV disinfection zone consists of two arrays of UV lamps, the top array is mounted above the wire belt and bottom array of lamps is mounted below t...

Provisur TST Coating machine

• Manufacturer: Provisur

Provisur Coater Coating machine, Stainless, high volume throughput waterfall coating machine, maximises coverage to the right thickness while reducing excess waste, stainless mesh belt 1700mm x 600mm, recirculati...

2021 Marel OMT50 Skinner

• Manufacturer: Marel

Marel OTM50 Skinner, 2021, Stainless skinner, skinner width 500mm roller, mobile, 3Ph

Baader 697 Bone separator

• Manufacturer: Baader
• Model: 697

Baader 697 Bone Separator, Stainless, 1200Kg raw material per hour, 3mm diameter drum, mobile, 3Ph

2019 Kaj Olesen TWP54 Pin Bone remover

Kaj Olesen TWP54 Pin Bone remover, Serial: 10810, 2019, stainless pin bone remover, capacity up to 350 - 700Kgs per hour, belt dimensions 1650mm x 350mm, 1Ph

CP 120 Salmon Slicer Blades – Spare parts

• Manufacturer: CP

Spare Blades From a CP120 Salon slicer 3 sets available. 2 look hardly used, one has some wear

Norfo Saw Spare Parts

We can supply various parts to the Norfo Saw We can supply all bandsaw and circular blades Also various parts to the Multiblade; Blade Guides Blade Guide Carbons/carbades Blade tension air ram Tensions shoes Blad...