Used Dust Collectors in Saxony, Germany

MÜNSTER dust extraction system

Dust extraction system, extraction, dust extraction MÜNSTER 77 A 88 2745 rpm 500 V 3AC 50 Hz without filter bag used, tested !

Cyclone dust collector dedusting filter DN 1800 mm #B12365

Air outlet top approx. Ø 850 mm Air inlet approx. 1070 x 530 cyclone Ø 1800 mm used Air inlet 2x left & 2x right available Height upper part approx. 1800/2000 mm Height hopper part approx. 3000 mm hopper Ø approx...

mobile dust extractor chip extractor dust extraction #N334

Hose Ø approx. 150 mm Catch bag approx. Ø 400 x 1250 mm Motor Hanning 8G2-459 1,1 kW; 2850 rpm mobile dust extractor dust extraction filter chip extractor used fan wheel Ø approx. 250 mm fan housing width ca. 150...

Dust filter bag filter approx. 1.5 m³ #B14582

• Manufacturer: Unknown

Dust filter Bag filter Bag filter dust filter nozzle filter used height approx. 4500 mm diameter approx. 800 mm volume approx. 1,5 m³ connection on the side 180 x 180 mm with automatic cleaning total dimensions a...

Dust extraction unit 0.73 kW #B17261

Dust extractor used Manufacturer CORAL Type NO-SMOKE Ø approx. 150 mm 2 pipes each approx. 1700 mm blower 0,73 kW 2800 rpm 220/380 V Dimensions approx. 1000 x 400 x 600 mm Subject to changes and errors in technic...

Unknown 8G2-459

• Manufacturer: Unknown

Hose Ø approx. 150 mm Catch bag approx. Ø 400 x 1250 mm Motor Hanning 8G2-459 1,1 kW; 2850 rpm mobile dust extractor dust extraction filter chip extractor used fan wheel Ø approx. 250 mm fan housing width ca. 150...

1991 Unknown AJN 082 V 33/2

• Manufacturer: Unknown

7 m³/hour 8m² filter area Exhaust air pocket filter Dust filter air filter exhaust air filter - used - For cleaning air from fine particles. Various filter cloths can be retrofitted. Manufacturer Laforsch & Brosc...

1998 Gyro ADG 300/600-21

• Manufacturer: Kreisel

Total capacity 7 m³ Stainless steel/VA rotary valve, Product dust dosing rotary feeder -used overhauled- = 3,5 liters per bag = 28 liters results in total capacity of 7 m³ incl. drive gear motor (with brake): SEW...

2004 Gyro ZST 250x400-21LU

• Manufacturer: Kreisel

EX II2/3Dc 80°C Stainless steel rotary feeder tangential feeder product dust ash feeder dosing feeder used With remote bearing, stuffing box and mounted speed monitor. Motor can be offered according to customer's...

2004 gyro RF 77 DT 80N-2

• Manufacturer: SEW-Eurodrive

1,1 kW | 2800/17 rpm stainless steel rotary valve product dust ash sluice dosing sluice 250 x 400 rpm used fabrication no. 41577 With offset bearings, stuffing boxes and speed monitoring. Material housing & cellu...

2006 gyro RF 77 DT 80 N4 / TF

• Manufacturer: SEW-Eurodrive

ADG 320x600-21-8,3 Stainless steel rotary valve product dust ash sluice dosing sluice as good as new, unused Serial No. 55059-2 With offset bearing, stuffing boxes and attached speed control. Laterally 2 cleaning...

2004 Gyro ZST 250x400-21LU

• Manufacturer: Kreisel

Stainless steel rotary valve dosing valve used EX II2/3Dc 80°C With offset bearings, stuffing boxes and attached speed monitoring. without drive motor, this can be offered separately and also adapted Total approx...

1993 VEM ANTRIEBSTECHNIK VDE 0530TI/7.91

• Manufacturer: VEM

Dust Suction Device - impeller Dm = 600x160mm - impeller = 360mm Intake: - intake conical dia = 250x200x200mm - collar dia = 250mm Exhaust opening: - dia = 250mm; Collar dia = 310mm Accessories: - 3x wall clamps ...