Used Drilling Rigs

BUCYRUS ERIE 22W CABLE TOOL DRILL RIG #7315T

• Manufacturer: Bucyrus-Erie
• Model: 22W
• Mast Height: 12.192 meter

Mounted on 1979 Ford Louisville truck with gas engine, 6 cylinder Hercules gas deck engine, 2 rear manual jacks, fully tooled (3” and larger), sitting since 2019, does not run Price: $16,500 - Illinois BUCYRUS ER...

1996 MOBILE B61HD DRILL RIG #3853Tc

Manufactured 1996, Cummins diesel deck engine, Moyno 3L8 pump, cathead, no auto hammer, mounted on 1996 Ford F800 diesel truck, starts and runs Price: $42,500 MOBILE B-59 AUGER DRILL RIG

1999 CASAGRANDE B130 HYDRAULIC DRILL RIG #4684Tb

• Manufacturer: Casagrande

Configured for CFA and rotary, year 1999, Cat 3116T diesel engine (104kw), approx 27,000 hours, max torque 108 kNm, mounted on Cat 320 on Sempirana tracks. CFA: 1000mm max diameter, 17.5m (12m + 6m kelly extensio...

INGERSOLL-RAND ECM350

• Manufacturer: Ingersoll Rand
• Model: ECM-350
• Drilling depth: 4.356 meter
• Mast Height: 5.753 meter

2.5 – 3.5 Inch Class VL140 Drifter Comes with 3 Air Compressors This is a Complete Drill Package with 3 Ingersoll-Rand Portable Air Compressors

1989 CME 75HT AUGER DRILL RIG #10533Ta

Manufactured 1989, mounted on 2014 Peterbilt 348 truck (approx 262,000 miles), 4 winch lines, 3L8 Moyno pump (new 2025), auto hammer, wiggle trail, 25’ mast, 400 gal SS tank, no breakout wrench Price: $200,000 CM...

2007 ATLAS COPCO ECM720

• Manufacturer: Atlas-Copco
• Model: ECM 720
• Horsepower: 384.8733394981728 horsepower
• Drilling depth: 29.5 meter

Montabert HC200A Drifter – ‘0’ hours on fresh service CAT Engine Set up for 60mm drill steel Onboard Air of 480 CFM @ 150 PSI 5500 total frame hours 2012 percussion hours w/ ‘0’ hours on new service. PRICED TO SE...

1998 GARDNER-DENVER 300

• Manufacturer: Gardner Denver

3.5” – 4.5” Inch Class CAT 3126 Diesel Engine Self-Contained Hydraulic Drill HPR1H Hydraulic Drifter New Injection Pump 2017 Handles a 20’ft starter steel Set up for T45 Low frame Hours Extendable Boom Dust Colle...

2003 SANDVIK D55SP

• Manufacturer: Sandvik

DTH Class 3508 Cat Engine Single Pass Unit Currently using a 8” DTH Hammer with a 9” Bit Equipped w/ ( 2 ) 6 ½” x 25 ft. Drill Pipe w/ 8” DTH Hammer Dust Collector Mast 73’ Long, U/C 85% – Excellent condition. Un...

2014 ATLAS COPCO FLEXIROC T45-10

• Manufacturer: Atlas-Copco
• Model: FLEXIROC T45
• Horsepower: 225 horsepower

2014 Year – Atlas Copco FlexiRoc T45-10 Powered by a Caterpillar C9.3 Diesel Engine472 CFM @ 174 PSI onboard Air Compressor COP3060 Drifter 13,219 Total Hours 4,922 Percussion Hours Set up for T51 (51mm) Drill St...

2021 Furukawa HCR1450-EDII

• Manufacturer: Furukawa
• Model: HCR1450EDII
• Horsepower: 260.15828523569866 horsepower
• Machine weight: 16,460 kilogram

Unit has 2,231 total hours & 1,068 percussion hours. Set up for T51 drill steel. HD828S drifter Excellent condition.

2007 SANDVIK D25KW CRAWLER DRILL RIG #9963Ta

• Manufacturer: Sandvik

Manufactured 2007, drills 5” to 6-3/4” diameter up to 88’ Price: $195,000 GARDNER DENVER 40T BLAST HOLE RIG

1996 INGERSOLL-RAND CM695D

• Manufacturer: Ingersoll Rand
• Model: CM-695D
• Horsepower: 309.77610252291953 horsepower

DTH Class Four (4) Machines for the PRICE OF ONE! Being Sold as a Complete Pkg. Only QTY. 4 – CM695D $85,000 Buys the Package CAT 3306 Diesel Engines HIGH Pressure IR Air Compressors for DTH Drilling (Qty. 1) – F...

REEDRILL TAURUS XL DRILL RIG #10089T

• Manufacturer: Taurus
• Model: XL
• Gearbox type: Automatic
• Drilling depth: 24.384 meter

Built in 1990’s, track mounted, 80’ depth, 120” max bit diameter, 10” inner kelly bar, 12” outer kelly bar, Cummins engine, automatic transmission, 25,000 lb service winch, 280 degree extendable table, 144,000 ft...

2005 INGERSOLL_RAND ECM 370

HIGH-PRESSURE DTH DRILL RIG Cat Diesel Powered Onboard High-Pressure Sullair Air Compressor Runs 20’ft drill pipe

2007 ATLAS COPCO ECM720

• Manufacturer: Atlas-Copco
• Model: ECM 720
• Horsepower: 384.8733394981728 horsepower
• Drilling depth: 29.5 meter

4.5” – 5.5” Inch Class CAT C11 Diesel Engine HC200A Drifter set up for GT60 Rods Caterpillar C11 Diesel Engine Montabert HC200A drifter. Recent new hydraulic Pump Aprox. 11800 total frame hours Unit is set up for...

Ingersoll Rand CM-351 Drilling Rig

• Manufacturer: Ingersoll Rand
• Model: CM-351

Good condition Ingersoll Rand CM-351 Drilling Rigs available between 1985 and 1999 years. Located in USA and other countries. Click request price for more information.