Used controllers

Pump belle & gossett model 104306 bell & gossett ecocirc xl 55-45 cast iron circulator #38920

• Manufacturer: Belle

Pump Belle & Gossett Model 104306 Bell & Gossett Ecocirc XL 55-45 Cast Iron Circulator 104306 Bell & Gossett Ecocirc XL 55-45 Large Wet Rotor Circulator with 1/2 horsepower, 208-230/1/60. The newly expanded ecoci...

Degassing unit FOSECO

• Manufacturer: Foseco

Dimensions: Length: 1350mm; Width: 1160mm; Height: 2050mm 400V; 50Hz; 1,6kW; 540rpm With CE label on the machine For crane suspension

2018 Mixing plant for core sand LORAMENDI 6t/h

• Manufacturer: Loramendi

Consisting of: -1 Sand bunker -1 Temperature control system 4.8t/h -1 Weighing hopper -1 Core sand mixer LORAMENDI; MDR1,5 150kg / filling; 90s mixing time / filling -2 Dosing tanks for resin and hardener -2 Tank...

Degassing unit PMC

• Manufacturer: PMC

Dimensions: Length: 2000mm; Width: 900mm; Height: 3160mm For aluminium Control board Gas supply via rotameter 0.18kW; 230V; 1.7A; 50Hz On wheels

Returner of moulding boxes VETTER 6t

• Manufacturer: Vetter

Dimension: lenght: 1220mm; width: 450mm; height: 850mm With control unit With 2 chains With crane eye

FLOWSERVE 68-3585 CAST IRON IMPELLER T213509

• Manufacturer: Flowserve

Extra Information Brand: FlowServe Model Part Number: 68-3585 Shipping Weight: 9 LBS Shipping Dimensions: 9 (in) × 9 (in) × 4 (in)

GOULDS R101-508 CAST IRON IMPELLER PUMP T213815

• Manufacturer: Goulds

Extra Information Brand: Goulds Model Part Number: R101-508 Shipping Weight: 14 LBS Shipping Dimensions: 14 (in) × 14 (in) × 8 (in)

Gassing unit LAEMPE G3-C-1 3KW

• Manufacturer: Laempe / Röperwerk

Dimensions: Length: 1100mm; Width: 520mm; Height: 2070mm

1987 Carousel core shooter, 4 stations, RÖPER, 16 l

• Manufacturer: Laempe / Röperwerk

Electric heating 20 s /core For core box 510 mm x 760 mm, h. 400 mm With horizontal and vertical seal Turning table with 4 tightening mechanisms in aluminium

Wire injection machine HOCHREUTER

Motor SEW 3,7 hp; 3250/190 rpm at the exit, 300 V With SIEMENS control S5-100 U With impulse generator

Turntable coreshooter Röper D1A/CO-CB

• Manufacturer: Laempe / Röperwerk

Dimensions: Width: 1950mm; depht: 2500mm; hight: 1850mm 2,5KW; 400V; 50Hz corbox dimensions: lenght: 300; width: 75/ 75 mm; hight: 285mm

Contenti 18 Inch Spin Casting Machine Cast Pewter Metal Car Emblems Large Reproductions 110 V

• Manufacturer: Contenti

This is a Contenti 18 Inch Spin Casting Machine - Model # 175130 - Serial #175130 - 110 Volts - 12 Amps - 60 Hz - Single Phase PTWS - 02192023-LR-20 Picture# 02102023 * All information deemed accurate but may...