Used controllers

1978 VOGEL & SCHEMMANN KSM 6.10.02
- Manufacturer: Vogel
Four-column machine, shooting volume 10 l, core box max. 510 x 450 x 450 mm / ___ kg, clamping/separating device, discharge carriage with lifting device, gas flushing plate, vibrating conveyor chute, control unit
Meinerzhagen, Germany
Trusted Seller
2023 Core shooter hotbox BIANCHI HBS 6.0, 6l
- Manufacturer: Bianchi
Warranty period until July 2024 External dimensions: Length: 3800mm; Width: 1700mm; Height: 2550mm With control unit SIEMENS S7 Core box dimensions: length: 650m; width: 370mm; height: 400mm Heating plates dimens...
Amel, Belgium
2006 SEGAB PROMIX 150
- Manufacturer: Segab
split daily silo (new sand/regenerated) of 2 m³ each, dust explosion filter, 2 sand heater-sieves, sand dosing, batch mixer 150 kg, ColdBox component dosing, core sand distribution wagon, electrical PLC control
Meinerzhagen, Germany
RÖPER / LAEMPE LKV H 12
- Manufacturer: Laempe / Röperwerk
Single-station machine, shooting volume 12 L, core box max. 400 x 600 x 355 mm, manual table height adjustment, vacuum clamping device, filling funnel with external vibrator, electrical control with LAEMPE operat...
Meinerzhagen, Germany
1976 RÖPER / LAEMPE LKV H 12
- Manufacturer: Laempe / Röperwerk
Single-column machine, shooting volume 12 l, core box max. 400 x 600 x 355 mm, manual table height adjustment, vacuum clamping device, vibrating infeed chute, safety housing, electric PLC control with two-hand sa...
Meinerzhagen, Germany
Trusted Seller
Cut-off machine with 2 parallel disks, Ø 300 mm, HANS BOOST
Type: STA 300/300, serial number: 354 Year of construction: 1974, weight: ± 700 kg Hydraulic tubes Motor H SAFTIG, type AOM132S-2, 7,5 kW, 380 V, 2910 rpm With table length 300 mm, width 200 mm, 2 discs Ø 300 mm ...
Amel, Belgium
Trusted Seller
2010 FASTLOOP, plate dimensions 2500 mm x 2300 mm
- Manufacturer: SOGEMi
Fastloop with 9 plates, 2500 mm x 2300 mm (wooden plates with holes) With 5 motorisated rolling conveyors, width 1000 mm; lenght ( 1×3970mm; 3×3480mm; 1×2980mm) With 2 motorisated support roller cconveyors, width...
Amel, Belgium
2021 Hindenlang MGB-70
- Manufacturer: Hindenlang
Mainly consists of: Conveyor belt with casting molds Air cooling molds Mold preheating station with gas burner Control cabinet with frequency converter (speed setting) Transfer and buffer channel for filling the ...
Iserlohn, Germany
2013 SEGAB PROMIX 2x 200
- Manufacturer: Segab
Divided daily silo (new sand/regenerate), capacity approx. 7 m³, dedusting filter, 2 sand heater sifters, sand dosing, 2 batch mixers á 200 kg, Pep Set component dosing, steel support structure, electric PLC cont...
Meinerzhagen, Germany
1990 LAEMPE core shooting unit LKFZ 20
- Manufacturer: Laempe / Röperwerk
- Model: LKFZ 20
Shooting volume 20 l, vertical/horizontal core box division, core box max. 750 x 800/790 x 335-630 mm, vacuum clamping & separating device, sand hopper, cabin, ColdBox gassing unit LG-R 1", hydraulic unit, PLC co...
Meinerzhagen, Germany
2000 LAEMPE core-producing center LLKFZ 10
- Manufacturer: Laempe / Röperwerk
casting volume 10 l, core box max. 700x 350/695 x 480 mm, vacuum clamping device, filling funnel, enclosure, PLC control with LAEMPE operator guidance, gassing device, sand mixer SM7 1.5, binder dosing, steel fra...
Meinerzhagen, Germany
Trusted Seller
Gasing unit Lüber LW-FDA 415/ 4kW
- Manufacturer: Lüber
- Model: LW-FDA 415
year of manufature 2012 Dimensions: width: 1450mm; depth: 780mm; hight: 1850mm 4kW; 3×400V, for Amingas with Rotocontrol , with autonomic control ! with stainless feeder tank 30l with leveldetector flow ...
Amel, Belgium
VOGEL & SCHEMMANN MISCHKA I GF/70 "A"
- Manufacturer: Vogel
Batch max. 50-75 kg, container Ø 530 x 400 mm, capacity max. 1 t/h, drive power 2.2 kW, connected load 380 V, 50 Hz, hand lever door lock, control with emergency stop push button, tilting lid with position limit ...
Meinerzhagen, Germany
RÖPERWERK H 40
- Manufacturer: Laempe / Röperwerk
Four-column machine, shooting volume 40 l, working area 1100 x 1000 x 1000 mm, core box max. 1000 kg, clamping/separating device, vibratory feeder, LUEBER ColdBox gas flushing unit LW-FDA1640, hydraulic unit, saf...
Meinerzhagen, Germany
Trusted Seller
Rebar straightening and cutting machine with good price
- Manufacturer: Feihong
Structure Drawing The CNC rebar straightening and cutting machine The CNC rebar straightening and cutting machine is used for straightening and cutting the 6 ~ 14 mm smooth wire rod steel, cold-rolled ribbed reba...
Jining, China