Used controllers

Double floor type grinder DÜRRSCHMIDT/VITEX, 760 mm, 50m/s

Motor CEM, Type: MJPP180MN4, serial number: L617626, 22 kW, 220/380 V, 1450 rpm Driving by beltsstone max 760 mm, stone width 60 mm Speed 50/s Files plates 260x90 mm (2x) With control cabinet

Automated core shooter RÖPER H5

• Manufacturer: Laempe / Röperwerk

Largest core box dimensions: width 460 mm, depth ± 500 mm, height 400 mm with vacuum pump and gas flushing plate With complete housing, core discharge plate, suction pipes, with hydraulic side clamping and hydra...

2019 Small round coating basin ±80l MJS

• Manufacturer: MJS

External dimensions: length: 750mm; width: 540mm, height: 1100mm Useful dimensions: Ø470mm; depth: 570mm Capacity ±80 litres For water sizing With 1 agitator; 0.75 kW Frequency-controlled, Speed adjustable by kno...

1991 Furan sand mixing plant WÖHR, double arm, 15t/h

• Manufacturer: Wöhr

Jib lenght 5200mm; (3200+2000mm) Live rings with pneumatic brake With 3 storage tanks 1 for resin 2 for hardener with catch basin, With dust collector KELLER With control board SIEMENS S5-100U With sand hoper ±6t

Core shooter ROEPER / LAEMPE, LKV25

• Manufacturer: Laempe / Röperwerk

Gassing plate fixed by vacuum Vacuum fixing of core box Hydraulic group STROMBERG Serial number 2736042, Type: HXU225G2V, 1, 4 kW, 380 V, 8,7 A, 1430 rpm Electric control cabinet BCR (BERNECKER und RAINER), type ...

1980 Green sand mixer EIRICH EBG4, with turbine

• Manufacturer: Eirich

Construction year: 1980, weight: ± 2000 kg Gear motor 19 kW, 380 V Mixer capacity ± 375 l, output ± 7,5 t/h/turbine Gear motor for mix cup turning 4 kW, 380 V, 125 rpm Motor outlet flap 0,75 kW With control relay...

2019 Small round coating basin ±80l MJS

• Manufacturer: MJS

External dimensions: length: 750mm; width: 540mm, height: 1100mm Useful dimensions: Ø470mm; depth: 570mm Capacity ±80 litres For water sizing With 1 agitator; 0.75 kW Frequency-controlled, Speed adjustable by kno...

2024 Small round coating basin ±80l MJS

• Manufacturer: MJS

External dimensions: length: 750mm; width: 540mm, height: 1100mm Useful dimensions: Ø470mm; depth: 570mm Capacity ±80 litres For water sizing With 1 agitator; 0.75 kW Frequency-controlled, Speed adjustable by kno...

Moulds turnover machine, 1800 mm IMF

Brand: IMF, serial number: 15462Weight: 3200 kg1425 rpm. ; 4 kW; 220/380 V2 clamping jaws 2 000 mm x 250 mmClamping and rotary movement hydraulicallyWith hydraulic unit ASEAMax. clamping width: 1750 mmWith contro...

1997 Moulding line BELLOI & ROMAGNOLI, 650 mm x 650 mm x 200/200 mm

Type: BRAP/4, construction year: 1997 Moulding line BELLOI & ROMAGNOLI hydraulic squeeze with rotating table With: - roller conveyors for return line (11 meters long) - roll-over (manual drive) - hydraulic statio...

NEW pneumatic sand conveyor FAT, S150 l

Type: S150-100, serial number: 5129 KOM N°: 18659 Weight: 295 kgDimensions: 1000 mm x 800 mm x 145 mmOutlet: Ø 80 mm inlet Ø 150 mmWith cone closure for side filling, 2 openingsControl voltage 230 VWith control...

2014 Core shooter LAEMPE LL10

• Manufacturer: Laempe / Röperwerk

Core shooter: Shooting volume: 15 litres (was expanded later for larger shot volumes) Dimensions of the machine: Length: 2100mm; Width: 2050mm; Height: 2080mm For horizontally and vertically separated core boxes ...

Sand conveyor STEIN 125 l

Type: SAP-PL, serial number: 148-1082 Year of construction: 1982, Weight: ± 180 kg Input 220 x 220 mm Exit Ø 80mm Pressure max 6 bar With pneumatic valve on the inlet With pressure control equipment With sensor W...