Used controllers

1973 Shell moulding machine SHALCO U900

External dimensions: length 3900 mm, width 1900 mm, height 2100 mm 700/13 rpm, 1410/27 rpm Without control panel With belt outlet With hydraulic unit (400 V, 15 kW)

Gassing unit BORDEN BETASET 10

External dimensions: 850 mm x 570 mm, h. 1500 mm; feet: 360 mm Three-phase motor 220 V With control box, emergency stop switch and heating, 3500 W; 220/380 V

Double floor type grinder DÜRRRSCHMIDT-VITEX, 760 mm, 50 m/s

Motor CEM, type: MJPP180M14, serial number: 543154, 18,4 kW, 1430 rpm, 220/380 V Driving by belts, stone max. 760 mm, width 60 m With control cabinet, continious speed 50 m/s

Band grinder MAFAC KS 450-1

• Manufacturer: Mafac

Dimensions: Width: 640mm; Depth: 1520mm; Hight: 1050mm Table 190×140mm; Working hight: 770mm ( possibility with increase: +140mm) With relais control With motor broke and emergency stop Intake manifold Ø160/120mm...

Shake-out grid 3890mm x 3390mm

With eccentric axis, direct drive over cardan and progressif start With solid cone between shake-out grid and vibrating conveyor On 12 oscillating rubber elements Holes 55mm x 40mm With control board for the refe...

Greensand cooler SIMPSON MC, 135 t/h

cooler drive 75 kW ventilator 37 kW 24000 m³/h pression 400 mm WC electric control by PLC Siemens S5 and water dosing water inlet 100 l/min pression 3-6 bar

Moulding machine HWS, type HSP 2

66 moulding boxes 700 mm x 550 mm, h. 225 mm With: - Sand hopper and extraction belt - Rolling conveyor 8 m - Air tank 1000 l - Electric control by PLC Siemens S5, 100 V

2007 One arm screw turbo mixer EUROTEK, 5 - 10 t/h

• Manufacturer: Eurotek

External dimensions: length 3200mm, width 900mm, height 2570mm Mixer with CE certificate With control board (renew edin 2015) over OLC SIELENS S7 / 037 With 3 pumps (2 membran pumps and 1 gear wheel) Driven over ...

Screw mixer for chemical sand, 2 - 3 t/h

For chemical sand With 2 new hand adjusted pumps, with new control cabinet With new motor, 4 kW, 700 rpm, 220/380 V With pneumatic slider, adjustable opening

Double wiring injection plant OCC

• Manufacturer: OCC

With injection lid lift Ø Wire: max: 13mm 400V/ 35A/ 50Hz/ 3,3kW Dimensions: length: 3260mm; width: 3050mm; height: 5470mm With control With CE Treatment with 2 wires at the same time Additional: 3 thermal analyz...

Hydraulic core shooter, VOGEL & SCHEMMANN, 10 l

• Manufacturer: Vogel

Type: KSM61000-CO2, serial number: 4396, Com. number: 19.355Year of construction: 1991 Control PLC Siemens S5 With cabin and gassing unit Hydraulic movement With hydraulic unit With vacuum clamping The machine ca...

NEW gassing units LÜBER LW-FDA 425

• Manufacturer: Lüber
• Model: LW-FDA 415

With heating 4 kW Max core weight 15 kg (± 10 l) With contactor control With stainless feeder tank 30 l Compressed air connector 1" With micro pump, gasdosing by rotameter Compressed air regulation by proportiona...

Frequency converter LOHER, 10 KVA 200 V. 300 HZ.

• Manufacturer: Loher

Motor: type: SN60M-2G, 8,5 kW, 2915 rpm, exit 220/380 V, 31/18 A Converter type DCG1610, 10 KVA, 200 V, 300 Hz Exit 220/380 V, 24/14,without control box

1991 Furan sand mixing plant WÖHR, double arm, 15t/h

• Manufacturer: Wöhr

Jib lenght 5200mm; (3200+2000mm) Live rings with pneumatic brake With 3 storage tanks 1 for resin 2 for hardener with catch basin, With dust collector KELLER With control board SIEMENS S5-100U With sand hoper ±6t