Used Processing in Wallonia, Belgium

1993 Cupola filter with cooler BETH, 16500 m³/h

Cupola filter with cooler With 2 ventilators for the cooler With stainless steel pipe from cupola furnace to cooler With control system Without chimney

Exhauster - fan/blower, 225 kW, 250.000 m³/h

Year of construction: 1982, weight: ± 3500 kg Motor LEROY SOMER, type: FNCB355S4B3, 225 kW, 1485 rpm, 220/380 V Input Ø 1540mm, fan wheel Ø 2400mm, width 400mm Motorized flap BERNARD, type A, 0,1 kW, 220/380 V, 1...

Jaw breaker, 1000 mm x 600 mm

With command box and flat belt pulley Jaws as good as new

filter for sawdust-shawings DEVAUZE VENTILATION, 4000 m³/h

6 bags Ø 600mm and 3 shafts above With new ventilator Intake hole Ø 260mm

2003 Cartridge filter DCE DONALDSON

• Manufacturer: Donaldson / Torit / DCE

Type : ECB-FM, serial number : 53041233 6 cartridges, Ø 320mm, height 660mm With 2 drawers for recovery of dust With 2 connectors to measure the vacuum Without exhaust For cabines, silos, ...

Cartridge filter DCE-DONALDSON for exhaust wall

• Manufacturer: Donaldson / Torit / DCE

Type : ECB-FH, serial number : 53041233 6 cartridges, Ø 320mm, height 660mm With two drawers for recovery of dust With 2 connectors to measure the vacuum Without exhauster for cabins Silos, etc...

Dedusting filter, VENTIOELDE, 3000 m³/h, cartridges

• Manufacturer: Venti Oelde

Type: AST04, serial numbers: 166799 (A) + 166799 (B) Filter with 2 cartridges (must be replaced) Cleaning by thermostat gate and compressed air

Compressed air cooler VIADEM, ± 6-7 m³/min = 390 m3 h.

Type : T151, serial number: 15116-0000-05-9309-0363 Year of construction: 1993, Weight: 300 kg 1,75 kW, 220 V mono, 11,6 A

Screw compressor BELAIR 2300 l/min.

• Manufacturer: Bélair

Type: VEIM20, Serial number: 0425227 Year of construction: 2004, Weight: ± 400 kg 15 Kw, 380 V, 20 hp Pressure 10 bar, 136 m³/h With cable and plug

Plunger mixer for coating basin

With electric motor Rotor Ø 150mm Outside height: 1200mm | Useful height: 800mm

510 mm x 450 mm x 80 mm, 9 kg

Magnetic stirres for lab SARTORIUS

• Manufacturer: Sartorius / Essen / Intellicyt

Serial number 416803 220 V, 50 Hz Speed regulation from 100 - 1100 rpm

Bottom pouring ladle UTARD, ± 2 t

Without handwheeel Weight: 1930 kg | Outside dimensions: 1800 mm x 1200 mm, h. 2350mm | Inside dimensions: Ø 940mm, h. 1050mm

Casting ladle ROPER, 4 t

With Oilbathgearbox Building year: 1988 | Weight: 3000 kg

Small cartridge filter for silo AXMANN ± 6,5 m³

• Manufacturer: Axmann

Year of construction: 1975, weight: ± 80 kg Filter with 6 cartidges Ø 190mm, h. 400mm Pneumatic dedusting The top is not closed