Used Processing in Wallonia, Belgium

Jolt squeeze moulding machine BMD; ARPA 300

• Manufacturer: BMD

Dimensions: Width: 960mm; Deepth: 1400mm; Hight: 2230mm Tightening: 1300mm; Turning out: 220mm with pin lifting With emergency stop (pneumatic) capacity of tightening dynamic : 15T, static: 5T;

Jolt squeeze moulding machine BMD; ARPA 300

• Manufacturer: BMD

Dimensions: Width: 960mm; Deepth: 1400mm; Hight: 2230mm Tightening: 1300mm; Turning out: 220mm with pin lifting With emergency stop (pneumatic) capacity of tightening dynamic : 15T, static: 5T;

Casting ladle motorized 20t, IBW

• Manufacturer: IBW

With motorized tilting and remote control With intermittend gear (manual gearbox) frequency controlled With counterweight on the overside With mechanical switch to "tilting by hand" With useable lining and 2 pour...

Dosing screw Ø 100mm

External dimensions: Läge: ±3500mm; Breite: ± 300mm drive over gearmotor and chain.

Core shooter LAEMPE L10 cold-box

• Manufacturer: Laempe / Röperwerk

Dimensions: Length: 2800mm; Width: 2300mm; Hight: 2040mm vacuum-clamping plats 410×200mm, with gazing plate, core extraction slide cabine, hydraulic unit and vacuum pumps, control board

Profil and formbandpapering machine HS

• Manufacturer: Bauknecht; 1,1KW; 500V 1420U/min

Dimensions: Width: 540mm; depth: 1200mm; height: 1530mm Motor: With pivoting table 730×500 mm for minimum 20° up to 50°, outreach 600mm

Core sand mixer V+S IGF 50L

• Manufacturer: Vogel und Schemman

Dimensions: Höhe: 1280mm Usable dimensions : Depth: Ø530mm Motor: Brand: Bauer; Type: gear box; 2,2KW, V200/380, 39,5t/min contenance 50L; 50 up to 75 kg sand Output 750 up to 1000kg/h With emergence cover with ...

Labo Sandrammer GF/PRA

• Manufacturer: GF

With sample sleeve Weight: 30kg

Sandlabo sand compactability tester GF/PVG

• Manufacturer: GF

Dimensions: Width: 215mm, Depth: 610mm, Height: 530mm with somples sleeve Ø 50mm H120 mm

Belt convoyor with sand arerator 3,56m×0,5m

External dimensions: Lenght: 3800mm; Width: 1050mm; Height: 560mm Used dimensions: Lenght 3560mm; Width: 500mm Motor: 1,1KW, 220/380V, 125r/min Chain drive, motor sand acrator 0,5 PS; 380V; 71,4 r/min

Hardening furnace for Labo 260×140×600 mm 1150°C

• Manufacturer: Mahler

Dimension: Width: 750mm, Depth: 930mm , Heignt: 1440mm Usable dimensions: width: 260mm; depht: 600mm; Hight: 140mm Revolving door with thermostat and control box

Band sander REMA vertical and horizontal

• Manufacturer: Merz

Motor: 1,8-2,2 kW, 380 V, n° 091670; 1450/2900 rpm, type FDR90L IP44 T-notch table with 2 speeds with dust collector in the base

Thickness gauge ELCOMETER

With box (microns) Weight: ± 3 kg | Dimensions: length 160 mm, largeur 85 mm, height 40 mm | Motor: 3 V, 2 batteries 1AA | Measuring gauge: 1 to 1250 µm

1992 Vibrating conveyor 1600mm x 590mm

• Manufacturer: ZIPPE

External dimensions: length 1650mm, width 960mm, height ± 800mm Motor: 2x 0,81 kW, 230/400 V, brand AEG, type vibrating motor, 1410 rpm, serial number 96005867 On 4 rubber springs

Vibrating conveyor KÜTTNER 4000mm x 800mm

• Manufacturer: Küttner

External dimensions: length 4150mm, width 1940mm, height 1500mm Motor: 2x 1,7 kW, 230/400 V, brand CYRUS, type vibrating motor, 980 rpm With base construction and releability ripcord