Used Forging

Trusted Seller
Hammer Forging Pneumatic M2145
- used
- Manufacturer: TMP Voronezh Russia
Capacity : 3.15 tons, Rated striking energy : 80 KJ, Max. no. of blows/min. : 60, Ram stroke : 1250 mm, Uprights distance : 710 mm, Ram dimensions : 750 mm, Die holder : 1000 mm, Min. Die holder to ram dis...
Europe
Trusted Seller
3150 tons Hot Forging Line Hasenclever VEPES3150
- used
- Manufacturer: Hasenclever
Capacity : 3150 tons, Stroke : 305 mm, No. of strokes per min. : 70, Clear stand width : 1250 mm, Table clamping surface -Width from left to right : 1235 mm, -Depth from front to back : 1600 mm, Slide clam...
Europe
Forging roll Eumuco RW1
- used
- Manufacturer: SMS Eumuco
- Model: RW1
Type Forging rolls Manufacturer Eumuco Model RW1 Max. Dia of Workpiece 55 mm Diameter of Rolling Segment 370 mm Usable width of middle roll 500 mm Usable width of outer roll 160 mm Max length of working pi...
Germany
Trusted Seller
2500 tons Hot Forging Line Smeral LKM2500MP
- refurbished
- Manufacturer: Šmeral Brno
1) Hot Forging Press SMERAL LKM 2500MP (1978/2022 retrofit by PRATO) Capacity : 2500 tons, Stroke : 320 mm, Stroke per minutes : 65, Single strokes 1/min : 25, Nominal pressure : 25000 kN, Adjustment : 10 ...
Europe
Trusted Seller
2500 tons Hot Forging Line Smeral LKM2500
- used
- Manufacturer: Šmeral Brno
1) Hot Forging Press Capacity : 2500 tons, Stroke : 320 mm, Stroke per minutes : 65, Single strokes 1/min : 25, Die height :1410 mm, Shut height : 905 mm, Nominal pressure : 25000 kN, Bolster size : 1340 ...
Europe
Trusted Seller
Hammer Drop Forging Open Die Beche L5
- used
- Manufacturer: Beche
Impact energy : 420, Ram stroke : 525 mm, No. of strokes : 100 / min, Ram hammer weight :20000 kg, Throat : 425 mm, Distance lower die block / ram gudeway : 435 mm, Power requirement : 220 kW, Dimensions (...
Europe
Trusted Seller
1.5 tons Hammer Forging Hydraulic Lasco KH20
- used
- Manufacturer: Lasco
Capacity 1.5 tons Ram stroke : 1100 mm, Ram weight : 1800 kg, Width for tool : 600 mm, Weight of anvil : 21700 kg, Total weight : 37 tons,
Europe
Trusted Seller
2 tons Hammer Forging Hydraulic Lasco KH250
- used
- Manufacturer: Lasco
- Model: KH250
Capacity : 2 tons, Blow energy : 2500 kg.m, Height of the drop with standard die : 1100 mm, Height of the die : 400 mm, Weight of the ram : 2300 kg, Distance between guides : 700 mm, Length of the ram : 59...
Europe
Trusted Seller
2.5 tons Hammer Forging Pneumatic MPM2000
- used
- Manufacturer: Huta Zygmunt, Polish
Capacity : 2.5 tons, Weight of falling part : 2480 kg, Stroke length : 950 mm, Distance between guides : 600 mm, Max weight of upper stamp : 800 kg, Height of stamp above the floor : 780 mm, Blow energy : 7...
Europe
Trusted Seller
Hammer Forging Open Die Pneumatic Beche
- used
- Manufacturer: Beche
Capacity : 5 tons Max RAM stroke : 1400 mm, Hitting Energy : 125-142 Kj, Length x Width x Height : 6250 × 1450 × 9130 mm (6190 mm from the ground) Weight : 115.5 tons.
Europe
Trusted Seller
2 tons Hammer Forging Hydraulic Smeral KHZ4
- used
- Manufacturer: Šmeral Brno
- Model: KHZ4
Capacity : 2 tons, Nominal forming energy :50 kJ, The stroke of ram : 500 mm, Stroke per minutes : 18 -145 Ram stroke at impact rated energy : 42, Dies clamping surface : 300 x 570 mm, Smallest total height...
Europe
Trusted Seller
1 ton Hammer Forging Hydraulic Smeral KHZ2
- used
- Manufacturer: Šmeral Brno
Capacity : 1 ton, Nominal energy : 20 kJ, Ram weight (without die holder) : 920 kg, Max ram stroke : 400 mm, Number of stroke per minutes : 60 , Column stroke at nominal energy of the hammer blow :36 mm Die...
Europe
Trusted Seller
0.63 ton Hammer Forging Hydraulic Lasco KH063
- used
- Manufacturer: Lasco
Capacity : 0.63 ton, Ram weight: 630 kg, Max. height of both dies without dovetails : 360 mm, Upper die weight max. : 100 kg, Bear weight : 630 kg, Bear depth : 400 mm, Clear width between the guides : 420 ...
Europe
Trusted Seller
3.15 tons Hammer Forging Hydraulic Lasco KH315
- used
- Manufacturer: Lasco
- Model: KH315
Capacity : 3.15 tons, Energy of blow : 3150 kgm, Falling height : 1100 mm, Weight of falling ram : 2900 kg, Max. weight of die : 530 kg, Way between slides : 700 mm, Motor power : 40 KW, Total height : 682...
Europe
Trusted Seller
2 tons Hammer Forging Hydraulic Smeral KJH4
- used
- Manufacturer: Šmeral Brno
Capacity : 2 tons, Ram weight : 1800 kgs Ram stroke : 500 mm, Number of ram strokes 1/min: 48, Ram impact rated energy : 4000 kgm, Die camping area : 286 x 600 mm, Min. die height : 350 mm, Output of main ...
Europe