Used Processing in Bremen, Germany

3950 liter pressure tank, Aisi 304

remarks: 1 manhole approx. 320 x 420 mm in the front bottom (the manhole cover of 1 tank is missing); tanks were attached as chamber tanks to other tanks - they would have to be supported accordingly on site for ...

6200 liter horizontal pressure tank, Aisi 304

• Manufacturer: Martin Rosa KG

remarks: 1 manhole approx. 320 x 420 mm in the front bottom (the manhole cover of 1 tank is missing); the type plate of 1 tank is missing; front bottom marbled on the outside; foot ends partially cut off, total h...

390 Liter heat-/coolable pressure tank, Aisi 316 with magnetic agitator

• Manufacturer: Pharmatec GmbH

max. allowable working temperature: 150 °C max. allowable working overpressure (dj): 6.0 bar max. allowable working underpressure (dj): 1,0 bar max. allowable working temperature (dj): 150 °C Temperature control ...

48000 litres horizontal storage tank, Aisi 304

• Manufacturer: Rieger

remarks: 1 manhole approx. 320 x 420 mm in the front bottom; Cylinder wall thickness: 3-4; total length and total height according to drawing; Tanks have been professionally cleaned and overhauled by the manufact...

9000 Liter storage tank, Aisi 304

• Manufacturer: Rieger

remarks: 1 manhole approx. 320 x 420 mm in the cylinder; the vessel was professionally cleaned and overhauled by the manufacturer in 2024; a brand-new residual drain valve (reduced outlet to DN 50 DIN 11851 (with...

880 Liter heat-/coolable pressure tank, Aisi 316 with magnetic agitator

max. allowable working temperature: 150 °C max. allowable working overpressure (dj): 6.0 bar max. allowable working underpressure (dj): 1,0 bar max. allowable working temperature (dj): 150 °C Temperature control ...

Unused 8890 Liter heat-/coolable pressure tank, Aisi 904L

max. allowable working temperature: 150 °C max. allowable working overpressure (dj): 10.0 bar max. allowable working underpressure (dj): 1,0 bar max. allowable working temperature (dj): 150 °C Temperature control...

Layer palletizer Pantec Maskinfabrik A/S for paper and plastic bags incl. spray glue unit, second-hand, very high output

Pantec Maskinfabrik A/S Layer palletizer for bags (paper or plastic) Very high cycle rate / output (currently approx. 1,200 bags / hour) Bag infeed at height Turning station with counter-rotating high-speed belts...

Unused 1700 liter heat-/ coolable pressure tank, Aisi 316

• Manufacturer: Hinke

max. allowable working temperature: 150 °C max. allowable working overpressure (dj): 10.0 bar max. allowable working underpressure (dj): 1,0 bar max. allowable working temperature (dj): 150 °C Temperature control...

Unused 500 liter heat-/ coolable pressure tank, Aisi 904L

• Manufacturer: Kasag

max. allowable working temperature: 150 °C max. allowable working overpressure (dj): 10.0 bar max. allowable working underpressure (dj): 1,0 bar max. allowable working temperature (dj): 150 °C Temperature control...

1100 liter pressure tank with ADR-approval, Aisi 316

• Manufacturer: Thielmann (UCON)

max. allowable working temperature: 50 °C remarks: Floor frame, V2A; manhole diameter approx. 250mm; immersion tube

1000 Liter insulated agitator tank, Aisi 316 with blades agitator

• Manufacturer: Thrun Maschinen- und Behälterbau

max. allowable working temperature: 90 °C remarks: Diameter manhole approx. 420 mm; Insulation around the cylinder (small dents in the insulation jacket)

41000 liter heat-/coolable horizontal tank, Aisi 304

Temperature control cylinder (dj): squared half-coil remarks: 1 manhole approx. 300 x 385 mm in the front bottom, 4 loose bearing shells, Fe with 2 height-adjustable feet each, Fe (height-adjustable screws partly...

36400 liter heat-/coolable horizontal pressure tank, Aisi 304

• Manufacturer: Ziemann Holvrieka

Temperature control cylinder (dj): squared half-coil remarks: 1 manhole approx. 360 x 440 mm in the front bottom; 3 loose bearing saddles each made of Fe (galvanized); 1 cut-off connection diameter 100 mm at the ...

2911 liter heat-/coolable pressure vessel (Becomix), Aisi 316 with anchor agitator

• Manufacturer: Becomix

max. allowable working temperature: 138 °C max. allowable working overpressure (dj): 5.0 bar max. allowable working temperature (dj): 151 °C Temperature control cylinder (dj): double jacket temperature control bo...