Used Tanks & Kettles in Bremen, Germany

2400 liter heat-/coolable tank, Aisi 304

Temperature control cylinder (dj): double jacket material temperatur control system: AISI 304 (V2A) 1.4301

412 liter heat-/coolable tank, Aisi 316

• Manufacturer: Gresser

max. allowable working temperature: 100 °C max. allowable working overpressure (dj): 3.0 bar max. allowable working temperature (dj): 100 °C Temperature control cylinder (dj): half-coil material temperatur contro...

350 liter heat-/coolable tank, Aisi 304

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket notice: some residues of previous content, pipe end cut flush, scratches inside, Functionality of the double jacket ...

4500 liter heat-/coolable tank, Aisi 316

max. allowable working overpressure (dj): 6.0 bar Temperature control cylinder (dj): half-coil temperature control bottom (dj): half-coil remarks: Half-coils cylinder only in the lower cylinder area material temp...

3000 liter heatable/coolable tank, AISI 316

• Manufacturer: Behälter KG

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket EX-proof: motor is ex-proof (compliance with the new ATEX directives must be verified, taking into consideration the...

250 liter heat-/coolable tank, Aisi 304

max. allowable working overpressure (dj): 4.0 bar Temperature control cylinder (dj): double jacket

300 liter pressure tank, Aisi 304

max. allowable working temperature: 132 °C Volume: 300 liter | Vacuum: 1,0 bar | Max. excess pressure: 4,0 bar | Upper bottom: screwed cover | Stand type: moveable on wheels | Ground clearance: 515 mm | Diameter ...

350 liter mobile tank on wheels, Aisi 304

remarks: Mobile on 4 plastic wheels; loose aluminum lid; tank slightly out of round

340 liter mobile tank on wheels, Aisi 304

remarks: Mobile on 4 plastic wheels; loose aluminum lid; tank slightly out of round

5380 liter standing vakuum pressure tank, Aisi316

• Manufacturer: Hinke

max. allowable working temperature: 200 °C Technical documentation: drawing,various documents ,CE label and declaration of conformity

5500 Liter 8 bar pressure tank, Aisi 304

remarks: 1 manhole approx. 320 x 420 mm in the front bottom (one tank is missing a manhole cover); tanks were attached as chamber tanks to other tanks - they would have to be supported accordingly on site for ins...

4000 liter flat bottom storage tank, Aisi 304

• Manufacturer: Schwarz

remarks: Tanks slightly out of round; outlet is lower than tank bottom (note this during installation); sheet metal cutouts in the lid; nameplate only present on 2 tanks; 1 tank with ball valve (see photos)

1400 liter tank with foldable lid-cover, Aisi 304

remarks: tank with internal fixtures and slight metallic discolourations

4000 liter insulated pressure tank, Aisi 304

remarks: Manhole approx. 335 x 445 mm; Tank with dents inside and outside (see photos); former heating jacket no longer functional; Inner tank was successfully tested for leaks at 3 bar

15000 Liter insulated pressure tank, Aisi 304

remarks: Steel heating pipes 2" in the skirt below the bottom of the tank