Processing » Heat Exchangers » Shell and Tube Heat Exchangers » Texas

Building Filters

709

Used Shell And Tube Heat Exchangers in Texas, USA

  • EXCHANGERS 102479

    EXCHANGERS 102479

    • Manufacturer: CO A S T

    MFG. BY CO. A.S.T. IN 1992; 253.8 SQM 316L SS TUBE HEAD; CS SHELL VERTICAL HEAT EXCHANGER (RE-BOILER); 9000MM LENGTH; 2300MM WIDTH; 2000MM HEIGHT; DESIGN PRESSURE TUBE SIDE 22 BAR @ 300 DEG. C.; SHELL 8 BAR @ 2...

    Cleveland, TX
  • EXCHANGERS 86923

    EXCHANGERS 86923

    • Manufacturer: CAMDEN ALLOY

    NORTH BOTTOM HPA EXCHANGER; MFG. BY CAMDEN ALLOY IN 1980;

    Cleveland, TX
  • EXCHANGERS 100430

    EXCHANGERS 100430

    • Manufacturer: HEATRAN

    CONVERTER FEED EFFLUENT EXCHANGER (1000 T/D NH3 PLANT); MFG. BY HEATRAN;

    Cleveland, TX
  • EXCHANGERS 98868

    EXCHANGERS 98868

    • Manufacturer: EFCO

    KELLOGG #123-C; NH3 CONVERTER EFFLUENT/BFW EXCHANGER; MFG. BY EFCO IN 1999; SPECIAL ALL WELDED;

    Cleveland, TX
  • EXCHANGER

    EXCHANGER

    • Manufacturer: OHMSEDE

    ONE (1) SURPLUS HEAT EXCHANGER; 20062 SQ. FT EXTENDED; 955 SQ. FT BARE; 382 PSI @ 650F SHELL; 255/FV PSI @ 200F TUBES; MFG. BY OHMSEDE; YR: 1991; LOW-FINNED TUBES; SN: 28392; NB: 161; WT: 63000 LBS; PLANT...

    Houston, TX
  • EXCHANGERS 114253

    EXCHANGERS 114253

      Previously Utilized in an API Facility. Used Condenser for ST-1601; 350 sq. ft. Shell & Tube horizontal Exchanger. Mfg. by Patterson Kelley. 316 Stainless Steel tubes MOC.

      Cleveland, TX
    • EXCHANGERS 114251

      EXCHANGERS 114251

        Used Condenser for K-2308; 94 sq. ft. Shell & Tube horizontal Exchanger. Mfg. by Perry Products in 1987. 316 Stainless Steel tubes MOC. 90 psi.

        Cleveland, TX
      • EXCHANGERS 114249

        EXCHANGERS 114249

          Previously Utilized in an API Facility. Used Condenser for K-2407 / R-2408; 92 sq. ft. Shell & Tube horizontal Exchanger. Mfg. by Kam Thermal. 316 Stainless Steel tubes MOC. 90 psi.

          Cleveland, TX
        • EXCHANGERS 113841

          EXCHANGERS 113841

            Used approximately 3480 sq. ft. 304 Stainless Steel shell & tube vertical heat exchanger. Mfg. by Harliss Specialties Corp in 1987. Shell SA515 Gr 70, 3' 1.25" diameter X 15' long. Maximum working pressure 75 ...

            Cleveland, TX
          • EXCHANGERS 113764

            EXCHANGERS 113764

              Used 424 sq. ft. Horizontal Exchanger. Mfg. by Perry Products in 1999. 14" diameter. Shell: Carbon Steel, 100 psi @ 350 deg. F. Tubes: 304L Stainless Steel, 100 psi @ 350 deg. F. With expansion joint.

              Cleveland, TX
            • EXCHANGERS 113770

              EXCHANGERS 113770

                Used 458 sq. ft. Vertical Exchanger. Mfg. by Doyle & Roth in 1998. 30" diameter x 12'0" F/F. Shell: Carbon Steel, FV/130 psi @ 350 deg. F. Tubes: 304L Stainless Steel, 100 psi @ 350 deg. F.

                Cleveland, TX
              • EXCHANGERS 113775

                EXCHANGERS 113775

                  Used 375 sq. ft. Exchanger. Mfg. by Gaspar in 2005. 14" diameter x 20'0" F/F. Shell: Carbon Steel, FV/123 psi @ 350 deg. F. Tubes: Hastelloy C 276, FV/123 psi @ 350 deg. F. (96) 3/4" O.D. x .065".

                  Cleveland, TX
                • EXCHANGERS 95061

                  EXCHANGERS 95061

                  • Manufacturer: SWECOMEX

                  KELLOGG #108-C UNUSED BFW EXCHANGER; BUILT FOR 1500 TPD KELLOGG AMMONIA PLANT; MFG. BY SWECOMEX IN 1988; 999MM X 6035 MM; 335M2; SHELL: 10.5 KG/CM @ 280 DEG. C.; TUBES 10.5 KG/CM @ 93 DEG. C.;

                  Cleveland, TX
                • EXCHANGERS 113771

                  EXCHANGERS 113771

                    Used 745 sq. ft. Horizontal Exchanger. Mfg. by Manning & Lewis in 1999. 30" diameter x 12'0" F/F. Shell: Carbon Steel, 140 psi @ 350 deg. F. Tubes: 304L Stainless Steel, 110 psi @ 350 deg. F. (633) 3/4" O.D. x 16...

                    Cleveland, TX
                  • EXCHANGERS 113777

                    EXCHANGERS 113777

                      Used 560 sq. ft. Vertical Exchanger. Mfg. by Gaspar in 2005. 18" diameter x 16'0" F/F. Shell: Carbon Steel, 123 psi @ 350 deg. F. Tubes: Hastelloy C 276, 123 psi @ 350 deg. F. (178) 3/4" O.D. x .065"., Heads are ...

                      Cleveland, TX
                    3334353637

                    Overview

                    Shell and tube heat exchangers are heavy-duty industrial devices that transfer heat between fluids using a bundle of tubes inside a pressure shell. They handle high temperatures and pressures, offer many material and design options, and are common in petrochemical, power, HVAC, and process industries. Used units are attractive because tubes can be replaced, but require careful inspection for corrosion, tube wear, leaks, and code compliance before purchase.

                    FAQ

                    What should I check when buying a used shell and tube heat exchanger?

                    Check design specs (flow rates, pressure, temperature), materials of construction, ASME or PED stamping, service history, tubing condition (wall thickness, corrosion, pitting), tube-sheet condition, end covers, and past repairs or thermal damage.

                    How do I prepare a shell and tube exchanger for shipping?

                    Fully drain and flush fluids, isolate and tag connected piping, remove fragile internals if recommended, coat exposed metal with preservative, secure tube bundle, protect nozzle faces and lifting points, and arrange appropriate heavy-haul transport and crane services.

                    What maintenance is needed after purchase to ensure reliable operation?

                    Start with a detailed inspection and pressure/hydrostatic test. Implement a cleaning plan (chemical or mechanical descaling), inspect and test tubes for leaks, replace gaskets, monitor for fouling and corrosion, and follow periodic inspections based on service severity.