- Trusted Seller

2008 ITALPRESSE PM/DE/1 #0626623
- Manufacturer: Italpresse
- Model: PMDE1
- Capacity: 100 kilogram
- Stroke length: 406.4 millimeter
Tonnage: 100 | Stroke: 16" | Daylight opening: 3.9" - 19.6" | Bolster dimensions: 98" X 51" | Ram dimensions: 98" X 51" | Distance between uprights: 24" | Loading height: 36" | Speed adjust: YES | Rack and pinio...
Toledo, OH - Trusted Seller

2008 ITALPRESSE PM/DE/1 #0626423
- Manufacturer: Italpresse
- Model: PMDE1
- Capacity: 100 kilogram
- Stroke length: 406.4 millimeter
Tonnage: 100 | Stroke: 16" | Daylight opening: 3.9" - 19.6" | Bolster dimensions: 98" X 51" | Ram dimensions: 98" X 51" | Distance between uprights: 24" | Loading height: 36" | Speed adjust: YES | Rack and pinio...
Toledo, OH - Trusted Seller

2008 ITALPRESSE PM/DE/1 #0626523
- Manufacturer: Italpresse
- Model: PMDE1
- Capacity: 100 kilogram
- Stroke length: 406.4 millimeter
Tonnage: 100 | Stroke: 16" | Daylight opening: 3.9" - 19.6" | Bolster dimensions: 98" X 51" | Ram dimensions: 98" X 51" | Distance between uprights: 24" | Loading height: 36" | Speed adjust: YES | Rack and pinio...
Toledo, OH - Trusted Seller

2006 ITALPRESSE FAST/130 13-85 Vertical edge joint gluing machine
- Manufacturer: Italpresse
installation consisting of the following components: - glue station for 2-component glue - Input table with motorized rollers and 90 ° rotation - Composition table and loading in the press - Press model FAST / 13...
Kortrijk, Belgium 
Italpresse Matrix
- Manufacturer: Italpresse
About the Italpresse Matrix The MATRIX with automatic pin pedestal system is the pinnacle of Italpresse’s range of air membrane presses. It is designed and engineered for the highest requirements in productivity,...
Hinckley, United Kingdom
Italpresse Kube SP/1A
- Manufacturer: Italpresse
About the Italpresse Kube SP/1A Italpress's carcass clamps, the 'Kube' and SP/1A are solidly built clamps much as as you expect from Italpresse. with tubular steel sections for high levels of strength. The pressu...
Hinckley, United Kingdom- Trusted Seller

2007 ITALPRESSE IDEAL/6-F Horizonal press, manual fed
- Manufacturer: Italpresse
PLATEN size mm. 3100 x 1300 Pressure cylinders with deep-chromed stems Cylinder stroke mm. 510 6 Cylinders Max opening between the platens mm. 510 Hydraulic unit installed power Kw. 2,2 Upstroke movement of botto...
Kortrijk, Belgium - Trusted Seller

2002 ITALPRESSE PM/DE/1 SPECIAL Horizonal press, manual fed
- Manufacturer: Italpresse
Cold press for flush doors The PM/DE for cold curing of doors or laminated panel stacks. Materials prepared in stacks approximately 1000 mm high are transported on motorized chains to the fixed base plate of the ...
Kortrijk, Belgium 
Italpresse Hydraulic Frame Clamp Mod. UNIVERSAL
- Manufacturer: Italpresse
Italpresse Hydraulic Frame Clamp Mod. UNIVERSAL Features Vertical-horizontal adjustable thrust No 2 vertical cylinders for horizontal cross-beam movement No 2 horizontal cylinders for frame squaring and clamping ...
Hinckley, United Kingdom
Italpresse Hydraulic Frame Clamp with Axis Control Mod
- Manufacturer: Italpresse
About this used Italpresse Hydraulic Frame Clamp with Axis Control Mod The Italpresse hydraulic frame clamp with axis control mod. Universal/CN, comes complete with a touch screen operator interface TS/500 to pro...
Hinckley, United Kingdom
Italpresse Presses for Laminated Beams mod. STL/200/3500
- Manufacturer: Italpresse
Italpresse Presses for Laminated Beams mod. STL/200/3500 Features Thrust cylinders manual exclusion Adjustable pneumatic horizontal pressure Pendant push button strip Italpresse Presses for Laminated Beams mod. S...
Hinckley, United Kingdom
Italpresse Hydraulic Press mod. PHF/50
- Manufacturer: Italpresse
Italpresse Hydraulic Press mod. PHF/50 Features For glueing and bending at the same time, by high frequency generator Upstroke movement Safety upstroke operated by two pushbuttons placed on the control board Self...
Hinckley, United Kingdom
Italpresse Press for Laminated beams mod. STL/Euro
- Manufacturer: Italpresse
Italpresse Press for Laminated Beams Mod. STL/Euro Features Lower plates working height 660mm / 1060mm / 1460mm Adjustable vertical height and horizontal pressure Thrust cylinders manual exclusion Pendant push bu...
Hinckley, United Kingdom
Italpresse Double Effect Hydraulic Frame Press Mod.SDE
- Manufacturer: Italpresse
Italpresse Double Effect Hydraulic Frame Press Mod.SDE Features Spring balanced cylinder positioning Three moving vertical beams with one top cylinder and one adjustable bottom stop each One vertical sliding beam...
Hinckley, United Kingdom
Italpresse Hydraulic Frame Clamp with Top Pressing Beam mod. FALCON/S
- Manufacturer: Italpresse
Italpresse Hydraulic Frame Clamp with Top Pressing Beam mod. FALCON/S Features Vertical-horizontal adjustable thrust No 2 vertical cylinders for horizontal cross-beam movement No 2 horizontal cylinders for frame ...
Hinckley, United Kingdom

