Used Processing in Wallonia, Belgium

Vibrating chut KÜTTNER-UHDE, 4900 mm x 800 mm

• Manufacturer: Küttner

2 motors UHDE type SM100, 9,6 KW, 220/380 V, 970 rpm Completely coverd trough belt, used to sort out

Shake-out grid, 2000 mm x 1000 mm, KÜTTNER

• Manufacturer: Küttner

2 vibrating motors, built on 8 rubber elements Outside dimensions: 2500x1500 mm | Useful dimensions: 2000x1000 mm

1964 Floor type grinder lapidaire, Ø 760 mm

Type: 76 LU - GV, serial number: E469 Overhauled Speed 45 m/s Stone of Ø 760 mm

Rubber pocket elevator, 5900 mm, straight

Gearmotor SEW, 0,25 kW 220/380 V, 1400/3,3 A Weight: ± 1000 kg | Outside dimensions: 6400 mm x 1100/800 mm | Useful dimensions: 5900 mm x 500 mm

Pneumatic sand transporter 220 l

Type: DE12, Serial number: 9484 Year of construction: 26/11/2001, Weight: ± 300 kg With gate valve Ø 160mm, outlet Ø 80mm Without command panel

Rubberbeltconveyor 8500 mm x 500 mm

Drum motor BAUER, type DT343, 2,2 kW, 220/380 V Troughing belt, speed 1,31 m/s With sheet metal border caoutchouc Flasks square ± 30°, on 3500 mm

Double floor type grinder MAPE, Ø 500 mm x 60 mm

• Manufacturer: Mape

2 motors VEM/ALMO, type: KPER122M2QU15252C4, serial number: 3217811091113834, 4 + 7,5 kW, 2880 + 2870 rpm, 380/660 + 400/660 V 2 speeds by cone pulley 2 file plates length 500 mm, width 220 mm weight +- 1300 kg W...

Treatment ladle ± 3t, IAS, with teapot spout

Inside dimensions: Ø 1000mm (without cement), depth 1520 mm (without cement) With planetary gearbox ODERMATH Refractory is useable

Moulding machine BMD ARPA1

Table 500 mm x 660 mm With jolts, press and removal from the mould successive Pression 4000 kg, vibrator 180 kg adjustable150/200/250 mm Foundation needed 275 mm Hand operated

Rubberbelt conveyor, 5920 mm x 800 mm

Roll Ø 900 mm; band width 800 mm External dimensions: length 7100 mm, h. 1100 mm | Band thicknes: ± 15 mm

Shake-out grid 1240 x 1240 mm

2 vibratingmotors FRIEDERICH, 1,1 KW, 980 rpm, 4520 Newton, 220/380 V

Screw conveyor 3140 mm, Ø 150 mm

Useful length 3140 mm Axle base between entrance and exit 3140 mm Inside Ø screw pipe 150 mm Entry and exit on ball joint With gear-motor, type R2320109ES1, 1400 rpm Inspection door has entry 180 mm x 100 mm Ente...

Sand conveyor 350 l, OFFICINE

Year of construction: 1996, Weight : ± 250 kg Konus in good condition With switch panel With pneumatic control valves Ø entry 250mm, Ø exit 90mm With pressure control valve, with additional accelerator at the exit

Sand aerator for belt conveyor, width 450 mm

Motor CEM, type MJUK 132 S, 5,5 kW, 220 / 380 V, 1445 rpm Mounted on a conveyor belt or placed above the sand aerator, length 4000 mm Transmission between motor and fraise by belts With tube for dust extraction, ...

Transport screw for bunker extraction, length 2700 mm

Screw Ø 300 mm, 2700 mm x 10 mm Opening over screw for bunker 2240 mm x 630 mm Motor 5,5 kW, 220/380 V, 1450 rpm