Used Materials Testing in Germany

+GF+ - GEORG FISCHER PRP
- Manufacturer: Georg Fischer
Standard test cylinder production by vibratory pressing, pressing pressure 1 kp/cm²
Meinerzhagen, Germany
+GF+ - GEORG FISCHER PCR
- Manufacturer: Georg Fischer
Manual drive, electrically heated, 220 V, temperature regulation up to 300°C, for determining the tensile strength (up to 400 N/cm²) of hot-hardening molding materials
Meinerzhagen, Germany
+GF+ - GEORG FISCHER SPCR
- Manufacturer: Georg Fischer
Manual drive, electrically heated, 220 V, temperature regulation up to 300°C, for determining the tensile strength (up to 400 N/cm²) of hot-hardening molding materials
Meinerzhagen, Germany
HARTIP 1900
Product information "HARTIP 1900" Hartip 1900 hardness tester (rebound hardness test) Operating instructions.
$2,054 USD
Münster, Germany
BNIF plates
Product information "BNIF Plates" Reference plates for testing surface roughness according to EN 1370 The 25 plates, each measuring 110 x 160 mm, are supplied in a case.
$1,261 USD
Münster, Germany
Illuminator, Allen-Vanguard VIP 2
- Manufacturer: Allen
Product information "Illuminator, Allen-Vanguard VIP 2" Illuminator, Allen-Vanguard VIP 2 - Small Illuminator LP 2/75 (2.0 mm x 75 mm) - Mirror clamp (2.0 mm/length 75 mm) - 1 x Spare 2 W bulb - Case with foam cu...
$539 USD
Münster, Germany
+GF+ - GEORG FISCHER PRA
- Manufacturer: Georg Fischer
- Model: PRA
Test specimen cylinder bushing, ram base, ejector, reading scale
Meinerzhagen, Germany
+GF+ - GEORG FISCHER SPRA
- Manufacturer: Georg Fischer
- Model: SPRA
Test specimen cylinder bushes, ram base, ejector, reading scale
Meinerzhagen, Germany
2004 YXLON International GmbH MU 2000 XL
- Manufacturer: Yxlon
Protective cabin, parts manipulator, turntable with three-jaw chuck, control panel with visualization, image intensifier, CRT screen, COMET X-ray tube (2004) MXR-225/0.2, 225 kV, workpiece max. Ø 800 x 1500 mm / ...
Meinerzhagen, Germany
+GF+ - GEORG FISCHER PVP
- Manufacturer: Georg Fischer
Battery-operated measuring instrument with digital display for determining the indentation resistance [N/m²] as a measure of the mold compaction of test specimens and molds made of green sand
Meinerzhagen, Germany
Scrata Plates - 48 pieces -
Product information "Scrata Plates - 48 pieces -" Comparison plates for testing surface quality according to DIN EN 1370 The set consists of the following: - Surface roughness (1-5) - Surface inclusions (1-5) - G...
$3,667 USD
Münster, Germany
Slip cross magnet 42 volts
Product information "Helling Cross Magnet 42 Volt" Helling Cross Magnet on rollers, completely overhauled // - recast - Ideal testing device for simultaneous longitudinal and transverse defect testing! Requires K...
$1,168 USD
Münster, Germany
Illuminator, Allen-Vanguard VIP 5
- Manufacturer: Allen
Product information "Illuminator, Allen-Vanguard VIP 5" Illuminators, Allen-Vanguard - Small Illuminator, 3.0 and 14.0 mm Series - Illuminator (3 mm/length 75 mm) & SP - 14 mm clip for mirror system - Probes (1 x...
$800 USD
Münster, Germany
Illuminator, Allen-Vanguard VIP 3
- Manufacturer: Allen
Product information "Illuminator, Allen-Vanguard VIP 3" Illuminator, Allen-Vanguard VIP 3 - Small Illuminator LP 3/75 (3.0 mm x 75 mm), - Mirror clamp (3 mm/length 75 mm), - 1 x spare 3 W bulb - Case with foam cu...
$551 USD
Münster, Germany
SEVERIN DK 1042
- Manufacturer: SEVERIN
Plates Ø 185 and Ø 155 mm, 2500 W, 230 V, 50 Hz
Meinerzhagen, Germany