Used temperature controllers

Johnson Controls LP-NRM652-000C Facility Explorer Network Room Module [New]

• Manufacturer: Johnson

. . . . . Network Room Modules (NRMs) are designed for use with Johnson Controls Facility Explorer FX06, FX07, FX14, and FXVMA Field Controllers. Johnson Controls LP-NRM652-000C Facility Explorer Network Room Mod...

Opto 22 G4PS245A Classic Controller Mistic I/O Brick Power Supply, 120VAC Input [Refurbished]

High power, lightweight modern design. Supports flexible combination of I/O bricks. Metal enclosure; 'A' suffix for 120 VAC input; 'B' suffix for 240 VAC input. Optimized for mistic controllers and I/O Bricks. Re...

Milltronics AO-10 Analog Output Module 100/115/200/230 VAC 15VA 50/60Hz New

• Manufacturer: Milltronics

Milltronics Analog Output Module Part number: 24751444-02 | Power rating: 100/115/200/230 VAC, ±15%, 15VA, 50/60 Hz | Operating temperature: -20° TO +50°C | Enclosure: Type 4 / NEMA 4X / IP65

Distech CDIDI-IO16XX-00 EC-NetAX IO-16 16 Point I/O Expansion Module 8UI 4RO 4AO [New]

. . . . . The EC-NetAX IO Modules are compact direct I/O modules for auxiliary monitoring and control with an EC-BOS-2AX or EC-BOS-6AX series controller or other EC-BOSAX devices. The EC-NetAX IO-16 expands the E...

Opto 22 G4AD10 G4 100 Ohm Platinum RTD Analog Input, Single Channel, Isolated [Refurbished]

RTD input: 100 Ω platinum (α = 0.00385). Nominal temperature range: -50 to 350 °C, -58 to 662 °F. Over/under range: -72 to 812 °C, -97.6 to 1493 °F. Accuracy: *±0.8 °C *Accuracy figure requires use of gai...

Opto 22 OAC5 G1 Family AC Digital Output, 12-140 VAC, 5 VDC Logic [Refurbished]

One Cycle Surge: 80 amps peak. Peak Repetitive Voltage: 500 Volts. Operating Ambient Temperature: -30 to 70 °C. Isolation, Input-to-Output (Transient): 4,000 Vrms. Minimum Load Current: 20 milliamps. G1 I/O fami...

Opto 22 G4B100 G4 B100 16-Channel Digital Brain Board for Mistic [New]

Power Requirements: 5.0 VDC ?é?? 0.1 VDC @ 600 mA max.. Operating Temperature: 0?é?? to 70?é??C, 95% humidity, non-condensing. CPU: 16-bit Intel 80C196 I/O processor. Communications Interface: RS-485 twisted pair...

Opto 22 B2 16-Channel Analog Optomux Protocol Brain Board, 5 .0 - 5.2 VDC at 0.5 [Refurbished]

Power requirements: 5 .0 - 5.2 VDC at 0.5 amps (excludes analog module requirements). Operating temperature: 0 degree C to 70 degree C, 95 percent humidity, non-condensing. Interface: RS-422/485 communications, 5...

Opto 22 IDC5BQ Quad Pak 4-Channel DC Input 4-16 VDC, 5 VDC Logic, High Speed [New]

Operating ambient temperature: -30 degree to 70 degree C. 4,000 Vrms Isolation input-to-output. 0.4 volts at 50 milliamperes Output voltage drop. 50 milliamperes Output current. 100 microamperes maximum at 30 VDC...

Opto 22 AD3 Standard Analog Input Module, Isolated, G1 Series, 4 to 20 mA [Refurbished]

Response Time Full-scale step change in 3 ms. Isolation Transient: Input-to-Output 4,000 Vrms. Power Requirements: 13 mA at +15 (+/- 0.25) VDC, 7.5 mA at -15 (+/- 0.25) VDC. Ambient Temperature: 0 to 70 °C Opera...