Stetson-Ross Chip Blanker Model 602-KS Two-Side 6" X 15"
used
- Manufacturer: Stetson-Ross
Used Stetson-Ross Model 602-KS Two-Side 6" x 15" Chip Blanker. Knurled and chromed 12"-diameter clamshell-type infeed rolls, with hydraulic tension and power hoist. Power hoist also for top chipping head. Top ...
Portland, OR
New ACE cutterheads
used
- Manufacturer: Ace
Brand New never installed ACE cutterheads located in New Zealand anyone who has a 50mm spindle body diameter 240mm (9+inches), lengths 310mm (12+inches), 220mm (8+ inches) and 130mm (5+inches)They are still crate...
Portland, OR
Powermatic Model E-16 6" X 16" Single Top Surfacer
used
- Manufacturer: Powermatic
UsedPowermatic Model E-16 6” X 16” Single Top Surfacer, S/N 5-8052-B. 4 knife ball bearing straight knife cutterhead. 5HP 220/440V 3-phase motor. Appears in very good condition. Has been test run in our shop. ...
Portland, OR
CASADEI Model F114 Heavy Duty Shaper
used
- Manufacturer: Casadei
- Model: F114
One Used CASADEI Model F114 Heavy Duty Shaper 4.8 kw (6.4 HP) main motor wired for 440 volts, 4 spindle speeds 2900, 4400, 6000 and 8000 RPM. Spindle diameter 1 1/4” ? and 7” under the nut. Table is 1100x700mm ...
Portland, OR
CASADEI Shaper, Model F114 Heavy Duty Shaper
used
- Manufacturer: Casadei
- Model: F114
One Used CASADEI Model F114 Heavy Duty Shaper 4.8 kw (6.4 HP) main motor wired for 440 volts, 4 spindle speeds 2900, 4400, 6000 and 8000 RPM. Spindle diameter 1 1/4” ? and 7” under the nut. Table is 1100x700mm ...
Portland, OR
Stetson-Ross Jointing Stand, Model 222D Motorized Jointing Stand
used
- Manufacturer: Stetson-Ross
Stetson-Ross Model 222D Motorized Jointing Stand. Set up for 1-13/16" heads, or others with screw-on adapters - not included. Very good condition. See photo of Stetson-Ross Model 222D Motorized Jointing Stand o...
Portland, OR
Delta DJ-20 Model #37-350 Jointer
used
- Manufacturer: Delta
- Model: DJ-20
Catalog number: 37-350 | Made in: Taiwan | Motor hp: 1.5 HP (1 1/2 HP) | Motor rpm: 3450 RPM | Voltage: 115/230V, 60 Hz | Amps: 16.8/8.4 A | Motor type: TEFC (Totally Enclosed Fan Cooled) | Service factor: 1.0 |...
$850 USDEugene, OR
Weinig H23 Hydromat moulder Parts Machine
used
- Manufacturer: Hydromat
One Used Weinig H23 Hydromat moulder Parts Machine. S/N 023-2159. The original feed was 7 1/2 HP - now its Teco Model N3 VFD drive see photos 1st Bottom - 15 HP 1-13/16” spindle RH & LH side heads were 10 HP But...
Portland, OR- Trusted Seller
1985 Delta "RJ-42" Jointer
used
- Manufacturer: Delta
Delta "RJ-42" Jointer 5 HP motor 4-3/4" diameter (4) knife cutter-head with high-speed steel knives 16-1/2" x 102-3/8" cast iron table. 7" x 43" fence, tiltable 1" Max depth capacity 1" x 16" rabbeting capacity O...
Oregon City, OR - Trusted Seller
1985 Jet "TWSS-2-3" Shaper
used
- Manufacturer: JET
Jet "TWSS-2-3" Shaper 5 HP motor Variable spindle speed: 3000, 4500, 6000, 10000 RPM Tilting spindle CW/CCW spindle rotation Dust shroud Back fence On pallet for ease of loading and shipping
Oregon City, OR - Trusted Seller
2006 Baker "M-412" Planer/Moulder
used
- Manufacturer: Baker
- Model: M-412
Baker "M-412" Planer/Moulder Planing capacity 13" width 3/8" - 9" height Two (2) sided planing or moulding capacity 13" width 7/16" - 9" height Four (4) sided planing or moulding capacity 12" width 7/16" - 2" hei...
Sisters, OR - Trusted Seller
2006 Extrema "Magnum XP MXP-233HD" Surface Planer
used
- Manufacturer: Extrema
Extrema "Magnum XP MXP-233HD" Surface Planer - Top & Bottom 32-3/4" x 8" cap., 3/8" min thickness cap.; 1/2" max. top & bottom stock removal; microprocessor controlled thickness opening with LED readout and key p...
Damascus, OR - Trusted Seller
Rockwell "37-215" Jointer
used
- Manufacturer: Rockwell
Rockwell "37-215" Jointer 9" x 66" table 4" x 34" fence Installed cutterhead Cutterhead cover
McMinnville, OR - Trusted Seller
Grizzly "G1024" Shaper
used
- Manufacturer: Grizzly
See Photos 60Hz Load out period: May 28 - June 6, 2025 (by appointment) | Estimated dimensions: 18"x18"x40"
Milwaukie, OR - Trusted Seller
Grizzly "G1024" Shaper
used
- Manufacturer: Grizzly
See Photos 60Hz Phase: 1 PHASE | Voltage: 220 VOLT | Load out period: May 28 - June 6, 2025 (by appointment) | Estimated dimensions: 30"x30"x48"
Milwaukie, OR
Tip: Enter manufacturer, model or keyword